THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

Sureshkumar Petchimuthu

,

Sathiya Moorthy Rajendran

online first only

Analytical study of exergetic efficiency of a solar air heater with C-shape roughness element

ABSTRACT
This study analytically evaluates the exergetic efficiency of solar air heaters incorporating C-shaped rib roughened absorber plates. Compared to flat plate designs, the proposed geometry significantly enhances energy performance. Optimal roughness parameters for maximizing exergy efficiency are identified, providing design guidelines for improved solar air heater systems. The maximum value of exergy efficiency of the Solar air heater, with C-shaped ribs was obtained as 5.9%.
KEYWORDS
C-Shaped ribs, exergy, Relative roughness pitch, solar air heater, Relative roughness height, Analytical Study
PAPER SUBMITTED: 2024-04-15
PAPER REVISED: 2024-05-06
PAPER ACCEPTED: 2024-08-30
PUBLISHED ONLINE: 2024-10-12
DOI REFERENCE: https://doi.org/10.2298/TSCI240415212P
REFERENCES
  1. Yadav, A. S., Gattani, A., Revisiting the influence of artificial roughness shapes on heat transfer enhancement, Materials Today: Proceedings, 62 (2022), 3, pp. 1383-1391, doi.org/10.1016/j.matpr.2021.12.254
  2. Yadav, A. S., Gattani, A., Solar thermal air heater for sustainable development, Materials Today: Proceedings, 60 (2022), 1, pp. 80-86, doi.org/10.1016/j.matpr.2021.11.630
  3. Agrawal, Y., et. al., Enhancement Of Thermo-Hydraulic Performance Using Double Arc Reverse Ribs In A Solar Collector: Experimental Approach, Materials Today: Proceedings, 47 (2021), pp.6067-6073, doi.org/10.1016/j.matpr.2021.04.623
  4. Dong, Z., et. al., A Study On Heat Transfer Enhancement For Solar Air Heaters With Ripple Surface, Renewable Energy, 172 (2021), pp.477-487, doi.org/10.1016/j.renene.2021.03.042
  5. Mahanand, Y., Senapati, J. R., Thermal Enhancement Study Of A Transverse Inverted-T Shaped Ribbed Solar Air Heater, International Communications in Heat and Mass Transfer, 119 (2020), 104922, doi.org/10.1016/j.icheatmasstransfer.2020.104922
  6. Abdullah, A. S., et. al., Experimental Investigation Of Single Pass Solar Air Heater With Reflectors And Turbulators, Alexandria Engineering Journal, 59 (2020), 2, pp.579-587, doi.org/10.1016/j.aej.2020.02.004
  7. Ghritlahre, H. K., et. al., Thermal Performance And Heat Transfer Analysis Of Arc Shaped Roughened Solar Air Heater - An Experimental Study, Solar Energy, 199 (2019), pp.173-182, doi.org/10.1016/j.solener.2020.01.068
  8. Noghrehabadi, A., et. al., An Experimental Study Of The Thermal Performance Of The Square And Rhombic Solar Collectors, Thermal Science, 22 (2018), 1, pp. 487-494, DOI: 10.2298/TSCI151228252N
  9. Alfarawi, S., et. al., Experimental Investigations Of Heat Transfer Enhancement From Rectangular Duct Roughened By Hybrid Ribs, International Journal of Thermal Sciences, 118 (2017), pp.123-138 doi.org/10.1016/j.ijthermalsci.2017.04.017
  10. Gill, R. S., et. al., Investigation On Performance Enhancement Due To Staggered Piece In A Broken Arc Rib Roughened Solar Air Heater Duct, Renewable Energy, 104 (2017), pp.148-162, doi.org/10.1016/j.renene.2016.12.002
  11. Sahu, M. K., Prasad, R. K., Exergy Based Performance Evaluation Of Solar Air Heater With Arc-Shaped Wire Roughened Absorber Plate, Renewable Energy, 96 (2016), pp.233-243, doi.org/10.1016/j.renene.2016.04.083
  12. Yadav, S., et. al., Exergetic Performance Evaluation Of Solar Air Heater Having Arc Shape Oriented Protrusions As Roughness Element, Solar Energy, 105 (2014), pp.181-189, doi.org/10.1016/j.solener.2014.04.001
  13. Yongsiri, K., et. al., Augmented Heat Transfer In A Turbulent Channel Flow With Inclined Detached-Ribs, Case Studies in Thermal Engineering, 3 (2014), pp.1-10, doi.org/10.1016/j.csite.2013.12.003
  14. Singh, A. P., et. al., Heat Transfer And Friction Factor Correlations For Multiple Arc Shape Roughness Elements On The Absorber Plate Used In Solar Air Heaters, Experimental Thermal and Fluid Science, 54 (2014), pp.117-126, doi.org/10.1016/j.expthermflusci.2014.02.004
  15. Kumar, A., et. al., Development Of Correlations For Nusselt Number And Friction Factor For Solar Air Heater With Roughened Duct Having Multi V-Shaped With Gap Rib As Artificial Roughness, Renewable Energy, 58 (2013), pp.151-163, doi.org/10.1016/j.renene.2013.03.013
  16. Lanjewar, A., et. al., Experimental Study Of Augmented Heat Transfer And Friction In Solar Air Heater With Different Orientations Of W-Rib Roughness, Experimental Thermal and Fluid Science, 35 (2011), 6, pp.986-995, doi.org/10.1016/j.expthermflusci.2011.01.019
  17. Hans, V. S., et. al., Heat Transfer And Friction Factor Correlations For A Solar Air Heater Duct Roughened Artificially With Multiple V-Ribs, Solar Energy, 84 (2010), 6, pp.898-911, doi.org/10.1016/j.solener.2010.02.004
  18. Gupta, M. K., Kaushik, S. C., Performance Evaluation Of Solar Air Heater Having Expanded Metal Mesh As Artificial Roughness On Absorber Plate, International Journal of Thermal Sciences, 48 (2009), 5, pp.1007-1016, doi.org/10.1016/j.ijthermalsci.2008.08.011
  19. Bhushan, B., Singh, R., Nusselt Number And Friction Factor Correlations For Solar Air Heater Duct Having Artificially Roughened Absorber Plate, Solar Energy, 85 (2011), 5, pp.1109-1118, doi.org/10.1016/j.solener.2011.03.007
  20. Akhtar, N., Mullick, S. C., Approximate Method For Computation Of Glass Cover Temperature And Top Heat-Loss Coefficient Of Solar Collectors With Single Glazing, Solar Energy, 66 (1999), 5, pp.349-354, doi.org/10.1016/S0038-092X(99)00032-8
  21. Altfeld, K., et. al., Second Law Optimization Of Flat-Plate Solar Air Heaters Part I: The Concept Of Net Exergy Flow And The Modeling Of Solar Air Heaters, Solar Energy, 41 (1988), 2, pp.127-132, doi.org/10.1016/0038-092X(88)90128-4
  22. Deceased, J. A. D., Beckman, W. A., Solar Engineering Of Thermal Processes. In Design Studies. 3 (1982), 3, doi.org/10.1016/0142-694x(82)90016-3
  23. A. Standard. Method Of Testing To Determine Thermal Performance Of Solar Collector. (1977) 93-97
PDF VERSION [DOWNLOAD]
Analytical study of exergetic efficiency of a solar air heater with C-shape roughness element