THERMAL SCIENCE
International Scientific Journal
Thermal Science - Online First
online first only
Analyzing metal material cooling intensity: A method for obtaining heat transfer coefficients
ABSTRACT
In laminar cooling, the cooling intensity is directly impacted by the heat transfer coefficient and affects the microstructure of metal materials, which in turn affects product performance. In order to determine the laminar cooling heat transfer coefficient, this study suggests a certain approach. Using the nozzle as the center, the dispersal form of coefficient of heat transfer as piecewise function formed a straight line and half sine wave was determined. It lays out the steps to take in experimental data, operating parameters, and structural parameters to get function's characteristic parameters. Experimental results confirm the method's correctness, and the effect of metal-specific characteristics on the temperature field was studied. A solid theoretical foundation for the field production process was provided by the mutual verification of the experimental and computed outcomes.
KEYWORDS
PAPER SUBMITTED: 2023-03-28
PAPER REVISED: 2023-09-20
PAPER ACCEPTED: 2023-10-25
PUBLISHED ONLINE: 2024-03-10
- C.-N. Tong and Y.-D. Gao, A useful method of building the heat transfer coefficient model in steel cooling process, Kang T'ieh/Iron and Steel (Peking), 46, 7, 2011, pp. 50-55.
- M. Wang, et al., Experimental study on the laminar cooling process of the middle and heavy plate, in Applied Mechanics and Materials, 2012, pp. 808-811.
- A. Cebo-Rudnicka, et al., Inverse determination of the heat transfer coefficient distribution on a steel plate cooled by a water spray nozzle, in WIT Transactions on Engineering Sciences, 2012, pp. 345-355.
- W.-L. Wu, et al., The study of improving the strip flatness in run-out-table during laminar cooling, International Journal of Advanced Manufacturing Technology, 95, 9-12, 2018, pp. 4419-4437.
- D. Chen, et al., Influence of heat transfer coefficient of laminar cooling on metal materials temperature field, Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering, 21, 9, 2021, pp. 1033-1041.
- J.-L. Chen, et al., Non-iterative method for ihcp of laminar cooling process of hot rolled steel plate, Journal of Iron and Steel Research, 25, 10, 2013, pp. 14-19.
- W. Yu, et al., Transformation and stress evolution in hot rolled strip coil of X70 pipeline steel in cooling process, Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology, vol. 39, 2, 2013, pp. 269-274.
- Y. Q. Zheng and J. Y. Cui, FE analysis of hot strips' temperature distribution in laminar cooling process, in Advanced Materials Research, 2014, pp. 647-650.
- N. H. Bhatt, et al., High mass flux spray cooling with additives of low specific heat and surface tension: A novel process to enhance the heat removal rate, Appl Therm Eng, 120, 2017, pp. 537-548.
- W. Liu, et al., Experimental Study of Laminar Cooling Process on Temperature Field of the Heavy Plate, in IOP Conference Series: Materials Science and Engineering, 2018.
- J. Pian, et al., Study of heat transfer parameters in the laminar cooling process for hot-rolled strips, in Advanced Materials Research, 2012, pp. 154-159.
- O. Resl and M. Pohanka, The effect of remaining water layer on final temperature of steel plate during hot rolling, in METAL 2019 - 28th International Conference on Metallurgy and Materials, Conference Proceedings, 2019, pp. 355-360.
- Y. Song, et al., High-precision coiling temperature control model for heavy gauge strip steel, Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 37, 1, 2015, pp. 106-110.
- V. Hernandez and K. Sunil, Effect of process design and operation on the thermal and microstructure and mechanical properties, in AISTech - Iron and Steel Technology Conference Proceedings, 2013, pp. 2201-2212.
- L.-Y. Jiang, et al., Analysis of heat transfer coefficients during high intensity cooling processes of hot rolled strips after rolling, Dongbei Daxue Xuebao/Journal of Northeastern University, 35, 5, 2014, pp. 676-680.
- D.-Z. Zhang, et al., Influence of accelerating rolling on the laminar cooling exit temperature in hot strip mill, Beijing Gongye Daxue Xuebao/Journal of Beijing University of Technology, 38, 1, 2012, pp. 33-38.
- H.-M. Wang, et al., Effect of water flow rate on the heat transfer coefficient of a hot steel plate during laminar flow cooling, Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 34, 2012, 12, pp. 1421-1425.
- S. Zhang, et al., Research on Mathematical Model of Inverse Heat Conduction Problem in Laminar Cooling Process, in Proceedings of 2018 IEEE 3rd International Conference on Cloud Computing and Internet of Things, CCIOT, 2018, pp. 444-447.
- B.-L. Deng and X.-R. Zhang, Flow stability of laminar supercritical CO2 sudden expansion flow with field synergy principle, in 2010 14th International Heat Transfer Conference, IHTC, 14, 2010, pp. 533-538.
- Z. Malinowski, et al., Implementation of the axially symmetrical and three dimensional finite element models to the determination of the heat transfer coefficient distribution on the hot plate surface cooled by the water spray nozzle, in Key Engineering Materials, 2012, pp. 1055-1060.
- J. Wang, et al., Research on solve of heat transfer coefficients and experimental of the heavy plate in laminar cooling process, in Journal of Physics: Conference Series, 2020.
- S. Li, et al., A T-S fuzzy model-based intelligent temperature prediction model of laminar cooling system, in Proceedings - 2015 Chinese Automation Congress, CAC, 2015, 2016, pp. 1221-1224.