ABSTRACT
Integrating a thermal management system for batteries can be a potent means of reducing their operational temperatures. This paper introduces a thermal management system that employs direct contact between the battery and a refrigerant. Through a series of tests examining the battery's cooling performance under conditions of natural convection, passive cooling, and active cooling, a comprehensive evaluation of the battery thermal management system was conducted. Comparing the maximum temperature of the battery at the end of discharge, passive cooling provides reductions of 11.99%, 26.07%, and 32.98% compared to the natural convection at the rate of 1C, 2C, and 3C discharge process, respectively. Furthermore, the effectiveness of active cooling increases as the temperature of the cooling water decreases. There is a temperature drop primarily stemmed from the refrigerant's phase change during the high-rate discharge process. Moreover, the temperature decrease at the moment of phase transition becomes more marked as the ambient temperature rose. In the 3C discharge with 5℃ cooling water circulation, Ttop, Tmiddle, Tbottom, and Tsides decreased by 1.63%, 1.90%, 5.21%, and 6.31%, respectively, during the refrigerant phase moment.
KEYWORDS
PAPER SUBMITTED: 2024-05-06
PAPER REVISED: 2024-07-20
PAPER ACCEPTED: 2024-07-26
PUBLISHED ONLINE: 2024-08-31
THERMAL SCIENCE YEAR
2025, VOLUME
29, ISSUE
Issue 1, PAGES [427 - 439]
- Amjad, S., et al., Review of Design Considerations and Technological Challenges for Successful Development and Deployment of Plug-in Hybrid Electric Vehicles, Renewable and Sustainable Energy Reviews, 14 (2010), 3, pp. 1104-1110
- Ahmadi, P., Environmental Impacts and Behavioral Drivers of Deep Decarbonization for Transportation Through Electric Vehicles, Journal of Cleaner Production, 225 (2019), July, pp. 1209-1219
- Speirs, J., et al., The Future of Lithium Availability for Electric Vehicle Batteries, Renewable & Sustainable Energy Reviews, 35 (2014), July, pp. 183-193
- Etacheri, V., et al., Challenges in the Development of Advanced Li-Ion Batteries: A Review, Energy & Environmental Science, 4 (2011), 9, pp. 3243-3262
- Ma, S., et al., Temperature Effect and Thermal Impact in Lithium-Ion Batteries: A Review, Progress in Natural Science-Materials International, 28 (2018), 6, pp. 653-666
- Barre, A., et al., A Review on Lithium-Ion Battery Ageing Mechanisms and Estimations for Automotive Applications, Journal of Power Sources, 241 (2013), Nov., pp. 680-689
- Doughty, D., Roth, E. P., A General Discussion of Li-Ion Battery Safety, Electrochemical Society Interface, 21. (2012), 2, pp. 29-36
- Bandhauer, T. M., et al., A Critical Review of Thermal Issues in Lithium-Ion Batteries, Journal of The Electrochemical Society, 158. (2011), 3, p. R1
- Zhang, J. Y., et al., Advanced Thermal Management System Driven by Phase Change Materials for Power Lithium-Ion Batteries: A Review, Renewable & Sustainable Energy Reviews, 159 (2022), 112207
- Kim, J., et al., Review on Battery Thermal Management System for Electric Vehicles, Applied Thermal Engineering, 149 (2019), Feb., pp. 192-212
- Bhattacharjee, A., et al., Design of an Optimized Thermal Management System for Li-Ion Batteries under Different Discharging Conditions, Energies, 13 (2020), 21, 5965
- Hasan, H. A., et al., A Novel Air-Cooled Li-Ion Battery (LIB) Array Thermal Management System - A Numerical Analysis, International Journal of Thermal Sciences, 190 (2023), 108327
- Wu, W. X., et al., A Critical Review of Battery Thermal Performance and Liquid Based Battery Thermal Management, Energy Conversion and Management, 182 (2019), Feb., pp. 262-281
- Li, M., et al., Performance Analysis of Liquid Cooling Battery Thermal Management System in Different Cooling Cases, Journal of Energy Storage, 72 (2023), 108651
- Jaguemont, J., Van Mierlo, J., A Comprehensive Review of Future Thermal Management Systems for Battery-Electrified Vehicles, Journal of Energy Storage, 31 (2020), 101551
- Giammichele, L., et al., Experimental Study of a Direct Immersion Liquid Cooling of a Li-Ion Battery for Electric Vehicles Applications, International Journal of Heat and Technology, 40 (2022), 1, pp. 1-8
- Rahman, A., et al., Fuzzy Controlled Evaporative Battery Thermal Management System for EV/HEV, International Journal of Electric and Hybrid Vehicles, 7 (2015), 1, pp. 22-39
- Al-Zareer, M., et al., Development and Evaluation of a New Ammonia Boiling Based Battery Thermal Management System, Electrochimica Acta, 280 (2018), Aug., pp. 340-352
- Hirano, H., et al., Boiling Liquid Battery Cooling for Electric Vehicle, Proceedings, IEEE Transportation Electrification Conference and Expo, Asia-Pacific (ITEC Asia-Pacific), Beijing, China, 2014
- Goodarzi, M., et al., Experimental Study of Li-Ion Battery Thermal Management Based on the Liquid-Vapor Phase Change in Direct Contact with the Cells, Journal of Energy Storage, 62 (2023), 106834
- Zhang, Q., et al., Study of Wet Cooling Flat Heat Pipe for Battery Thermal Management Application, Applied Thermal Engineering, 219 (2023), 119407
- Li, Y., et al., Experimental Studies of Liquid Immersion Cooling for 18650 Lithium-Ion Battery Under Different Discharging Conditions, Case Studies in Thermal Engineering, 34 (2022), 102034
- Liang, L., et al., Inclined U-Shaped Flat Microheat Pipe Array Configuration for Cooling and Heating Lithium-Ion Battery Modules in Electric Vehicles, Energy, 235 (2021), 121433
- Zhang, J., et al., Advanced Thermal Management System Driven by Phase Change Materials for Power Lithium-Ion Batteries: A Review, Renewable and Sustainable Energy Reviews, 159. (2022), 112207
- Li, Y., et al., Experimental Studies of Liquid Immersion Cooling for 18650 Lithium-Ion Battery Under Different Discharging Conditions, Case Studies in Thermal Engineering, 34 (2022), 102034
- Liang, J. L., et al., Investigation on the Thermal Performance of a Battery Thermal Management System Using Heat Pipe Under Different Ambient Temperatures, Energy Conversion and Management, 155 (2018), Jan., pp. 1-9
- Kong, D.P., et al., A Novel Battery Thermal Management System Coupling with PCM and Optimized Controllable Liquid Cooling for Different Ambient Temperatures, Energy Conversion and Management, 204 (2020), 11228