ABSTRACT
In this study, we conducted a numerical investigation of heat transfer and pressure drop in annular corrugated and 1-, 2-, and 3-start spiral-corrugated flexible metal hoses. To validate the numerical results for pressure drop, we established an experimental set-up. The pressure drop results were verified through experimental data, while the numerical heat transfer results were validated against existing correlations in the literature. The results obtained using the corrugated flexible metal hoses were compared to those of a smooth tube, and all hoses along with the smooth tube were 1 meter long. The hydraulic diameters of the annular corrugated hose and the spiral corrugated hoses were 25 mm and 26.2 mm, respectively, with a corrugation depth of 3.2 mm for all hoses. Water, at an average temperature of 25°C, was used as the fluid, with a constant surface temperature of 70°C for the test tube. Analyses were conducted for Reynolds numbers ranging from 10000-50000. The results indicated that the fluid outlet temperature and pressure drop values for the annular corrugated hose were generally higher than those for the spiral corrugated hoses. Among the hoses tested, the 1-start spiral corrugated hose showed the highest friction factor, 7.83 times higher than that of the smooth tube. The 3-start spiral corrugated hose achieved the highest Nusselt number, 1.4 times higher than that of the smooth tube, at a Reynolds number of 20000. The performance evaluation criteria for all hoses ranged from 0.6-1.
KEYWORDS
PAPER SUBMITTED: 2023-12-17
PAPER REVISED: 2024-05-26
PAPER ACCEPTED: 2024-05-30
PUBLISHED ONLINE: 2024-08-18
THERMAL SCIENCE YEAR
2024, VOLUME
28, ISSUE
Issue 6, PAGES [4669 - 4683]
- Kongkaitpaiboon, V., et al., Effects of spiral start number and depth ratio of corrugated tube on flow and heat transfer characteristics in turbulent flow region, J. Mechanical Science and Technology, 33 (2019), 8, pp. 1-8
- Kareem, Z. S., et al., Heat Transfer Enhancement in Two-Start Spirally Corrugated Tube, Alexandria Engineering J., 54 (2015), 3, pp. 415-422
- Sethumadhavan, R., Raja Rao, M., Turbulent Flow Friction and Heat Transfer Characteristics of Single- and Multi-Start Spirally Enhanced Tubes, ASME J. Heat Transfer, 108 (1986), 1, pp. 55-61
- Haervig, J., et al., On the Fully-Developed Heat Transfer Enhancing Flow Field in Sinusoidally, Spirally Corrugated Tubes Using Computational Fluid Dynamics, Int. J. Heat and Mass Transfer, 106 (2017), Mar., pp. 1051-1062
- Promthaisong, P., et al., 3-D Numerical Study on the Flow Topology and Heat Transfer Characteristics of Turbulent Forced Convection in Spirally Corrugated Tube, Numerical Heat Transfer, 69 (2016), Part A, pp. 607-629
- Pethkool, S., et al., Turbulent Heat Transfer Enhancement in a Heat Exchanger Using Helically Corrugated Tube, Int. Commun. Heat Mass Transfer, 38 (2011), 3, pp. 340-347
- Vicente, P. G., et al., Experimental Investigation on Heat Transfer and Frictional Characteristics of Spirally Corrugated Tubes in Turbulent Flow at Different Prandtl Numbers, Int. J. Heat and Mass Transfer, 47 (2004), 4, pp. 671-681
- Dong, Y., et al., Pressure Drop Heat Transfer and Performance of Single-Phase Turbulent Flow in Spirally Corrugated Tubes, Experimental Thermal Fluid Science, 24 (2001), 3-4, pp. 131-138
- Qian, J. Y., et al., Thermohydraulic Performance Evaluation of Multi-Start Spirally Corrugated Tubes, Int. J. Heat and Mass Transfer, 156 (2020), 119876
- Jin, Z. J., et al., Effects of Pitch And Corrugation Depth On Heat Transfer Characteristics In Six-Start Spirally Corrugated Tube, Int. J. Heat and Mass Transfer, 108 (2017), Part A, pp. 1011-1025
- Mimura, K., Isozaki, A., Heat Transfer And Pressure Drop Of Corrugated Tubes, Desalination, 22 (1977), 1-3, pp. 131-139
- Al-Obaidi, A. R., Investigation on Effects of Varying Geometrical Configurations on Thermal-Hydraulics Flow in a 3-D Corrugated Pipe, Int. J. Thermal Sciences, 171 (2022), 107237
- Al-Obaidi, A. R., et al., Analysis on Flow Structure and Improvement of Heat Transfer in 3-D Circular Tube with Varying Axial Groove Turbulator Configurations, Heat Transfer, 50 (2021), 7, pp. 7333‐7348
- Djordjevic, M. Lj., et al., Pressure Drop and Stability of Flow in Archimedean Spiral Tube with Transverse Corrugations, Thermal Science, 20 (2016), 2, pp. 579-591
- Ponnusamy, S., et al., Experimental Studies on Heat Transfer and Friction Factor Characteristics of a Turbulent Flow for Internally Grooved Tubes, Thermal Science, 20 (2016), Suppl. 4, pp. S1005-S1015
- Al-dabagh, A. M., et al., Effect of Corrugation Depth on Heat Transfer Enhancement and Flow Characteristics for Corrugated Tubes, Journal of University of Babylon for Engineering Sciences, 26 (2018), 7, pp. 164-181
- Zhai, H., et al., The Influence of Corrugated Pipes Parameters on Heat Transfer Characteristics, Thermal Science, 28 (2024), 1A, pp. 257-267
- Cengel, Y. A., Heat and Mass Transfer: A Practical Approach, McGraw-Hill, New York, USA, 2007
- ***, ANSYS Fluent Theory Guide, www.ansys.com, 2022
- Incropera F., Dewitt, P. D., Fundamentals of Heat and Mass Transfer, Wiley, New York, USA, 1996
- Blasius, P. R. H., Law of Similarity for Frictional Processes in Liquids (in German), Forschungsheft, 131 (1913), pp. 1-41
- Gnielinski, V., New Equations For Heat And Mass Transfer In Turbulent Flow Pipes And Channels (in German), Forschung im Ingenieurwesen A, 41 (1975), 1, pp. 8-16
