THERMAL SCIENCE

International Scientific Journal

Junhu Hu

,

Kaiqiang Hu

,

Lei Xin

,

Hao Liu

,

Xiaohong Yang

,

Shunli Wu

EXPERIMENTAL STUDY OF PHOTOTHERMAL CONVERSION OF HEAT ABSORBERS FILLED WITH METAL FOAMS OF DIFFERENT PORE DENSITIES

ABSTRACT
High output temperature and photothermal conversion effectiveness were achieved with the absorber platform structure. A novel solar receiver was manufactured to integrate pre-heating and thermal conversion, aiming to enhance heat utilization and output temperature. This work is based on the engineering design and experimental testing of a solar cavity-receiver containing a porous copper foam that can volumetrically absorb high-flux radiation and heat up, through convection with air-flow. The air outlet temperature, outer wall temperature, thermal performance, and efficiency were experimentally determined by pore density, air mass-flow rate and solar irradiance. Additionally, the temperature growth of unit incident power, the unit volume efficiency growth rate, and output temperature were employed to evaluate the thermal conversion characteristics of the endothermic body (copper foam). The results indicated that the air outlet temperatures can reach 500°C with lower input power. Furthermore, it was found that under a pore density of 30 pores per inch and a flow rate of 60 Lpm, the photothermal conversion efficiency of the absorber with copper foam reached as high as 87.61%, which is 35.04% significantly higher than that of an absorber without copper foam. The manageable solar receiver design proved to deliver a high-temperature air-flow (approximately 500°C) with a reasonably high thermal efficiency (over 85%).
KEYWORDS
metal foam, photothermal conversion, absorber, pore density
PAPER SUBMITTED: 2023-10-30
PAPER REVISED: 2023-12-16
PAPER ACCEPTED: 2024-03-14
PUBLISHED ONLINE: 2024-04-14
DOI REFERENCE: https://doi.org/10.2298/TSCI231030080H
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2024, VOLUME 28, ISSUE Issue 5, PAGES [3603 - 3616]
REFERENCES
  1. Soliman, M. S., et al., Supervisory Energy Management of a Hybrid Battery/PV/Tidal/Wind Sources Integrated in DC-Microgrid Energy Storage System, Energy Rep., 7 (2021), Nov., pp. 7728-7740
  2. Hu, T., et al., Photothermal Conversion Potential of Full-Band Solar Spectrum Based on Beam Splitting Technology in Concentrated Solar Thermal Utilization, Energy, 268 (2023), 126763
  3. Pioro, I., et al., Pros and Cons of Commercial Reactor Designs: Part 2 Current Status and Future Trends in the World Nuclear-Power Industry and Technical Considerations of Nuclear-Power Reactors, in: Encyclopedia of Nuclear Energy (ed. Ehud Greenspan), Elsevier, Amsterdam, The Netherlands, 2021, pp. 288-303
  4. Ali, H. M., Phase Change Materials Based Thermal Energy Storage for Solar Energy Systems, J. Build. Eng., 56 (2022), 104731
  5. Liu, H., et al., Microencapsulating n-Docosane Phase Change Material into CaCO3/Fe3O4 Composites for High-Efficient Utilization of Solar Photothermal Energy, Renew. Energy, 179 (2021), Dec., pp. 47-64
  6. Cui, H. Z., et al., Enhancing the Heat Transfer and Photothermal Conversion of Salt Hydrate Phase Change Material for Efficient Solar Energy Utilization, J. Energy Storage, 49 (2022), 104130
  7. Zhang, H. Y., et al., 3D Porous Copper Foam-Based Shape-Stabilized Composite Phase Change Materials for High Photothermal Conversion, Thermal Conductivity and Storage, Renew. Energy, 175 (2021), Sept., pp. 307-317
  8. Xu, S. D., et al., Performance Optimization Analysis of Solar Thermophotovoltaic Energy Conversion Systems, Sol. Energy, 149 (2017), June, pp. 44-53
  9. Horikawa, M., et al., Metamaterial Perfect Absorber-Enhanced Plasmonic Photo-Thermoelectric Conversion, Appl. Phys. Express, 13 (2020), 8, 082006
  10. Valizade, M., et al., Experimental Study of the Thermal Behavior of Direct Absorption Parabolic Trough Collector by Applying Copper Metal Foam as Volumetric Solar Absorption, Renew. Energy, 145 (2020), Jan., pp. 261-269
  11. Jamal-Abad, M. T., et al., Heat Transfer in Concentrated Solar Air-Heaters Filled with a Porous Medium with Radiation Effects: A Perturbation Solution, Renew. Energy, 91 (2016), June, pp. 147-154
  12. Xu, S., et al., Performance Optimization Analysis of Solar Thermophotovoltaic Energy Conversion Systems, Sol. Energy, 149 (2017), June, pp. 44-53
  13. Dong, X. H., Research on High Temperature Heat Transfer Characteristics of a Porous Volumetric Solar Receiver, M. Sc. thesis, Harbin Engineering University, Harbin, China, 2015
  14. Mey-Cloutier, S., et al., Experimental Study of Ceramic Foams Used as High Temperature Volumetric Solar Absorber, Sol. Energy, 136 (2016), Oct., pp. 226-235
  15. Reddy, K. S., et al., Experimental Investigation of Porous Disc Enhanced Receiver for Solar Parabolic Trough Collector, Renew. Energy, 77 (2015), May, pp. 308-319
  16. Meng, X. L., et al., A Vector Based Free Form Approach for Reflecting Concentrator of Solar Energy, Sol. Energy, 153 (2017), Sept., pp. 691-699
  17. Yan, J., et al., Study on the Optical Properties of Solar Dish/Triangular Cavity Receiving System with Uniform Energy Flow Distribution, Journal of Solar Energy, 41 (2020), 7, pp. 203-213
  18. Yu, C. L., Research on Heat Transfer Characteristics of Porous Media Receiver, M. Sc. thesis, Harbin Engineering University, Harbin, China, 2012
  19. Jiang, Z. W., Design and Experimental Study of Metal Foam Solar Air Heat Absorber, M. Sc. thesis, University of Chinese Academy of Sciences, Beijing, China, 2016
  20. Xu, C., et al., Numerical Investigation on Porous Media Heat Transfer in a Solar Tower Receiver, Renew. Energy, 36 (2011), 3, pp. 1138-1144
  21. Wang, Y. Q., Research on Heat Transfer Characteristics of Solar Porous Medium Air Receiver, M. Sc. thesis, Harbin Engineering University, Harbin, China, 2015
  22. Ghosh, I., Dixit, T., An experimental Study on Open Cell Metal Foam as Extended Heat Transfer Surface, Exp. Therm. Fluid Sci., 77 (2016), Oct., pp. 28-37
  23. Cao, Y., et al., Heat Transfer and Thermodynamic Analysis of Individual and Simultaneous Effects of Revolution, Microporous Media, Magnetic Inductor, and Nanoparticles in Concentrating Solar Collectors, Int. Commun. Heat Mass Transfer, 129 (2021), 105687
  24. Yang, B., et al., Effect of Nanoparticles and Metal Foams on Heat Transfer Properties of PCMs, Int. Commun. Heat Mass Transfer, 179 (2022), 107567
  25. Wang, Z. L, et al., Effect of Copper Metal Foam Proportion on Heat Transfer Enhancement in the Melting Process of Phase Change Materials, Appl. Therm. Eng., 201 (2022), 117778
  26. Tian, Y. et al., A Numerical Investigation of Heat Transfer in Phase Change Materials (Pcms) Embedded in Porous Metals, Energy, 36 (2011), 9, pp. 5539-5546
  27. Yang, T. H, et al., Numerical Study of Flow and Heat Transfer in a Three-Dimensional Metal Foam Considering Different Direction Micropores in Skeleton Structure, Int. Commun. Heat Mass Transfer, 134 (2022), 106052
  28. Li, Y. Z, et al., Influence of Foamed Metal Core Flow Heat Transfer Enhancement on the Performance of Thermoelectric Generators with Different Power Generation Characteristics, Therm. Sci. Eng. Prog., 31 (2022), 101300
  29. Hu, J. H., et al., Experiment and Simulation Investigation of Flow Characters in Metal Foam, Numer. Heat Transfer B, 83 (2022), 1-2, pp. 24-38
  30. Shen, H. M., et al., Pore-Scale Numerical Investigation on Comprehensive Heat Transfer Performance of Homogeneous and Graded Metal Foam Heat Sinks Based on Tetrakaidecahedron Cell, Thermal Science, 28 (2024), 2B, pp. 1529-1544
  31. Ghalambaz,M., et al., Anisotropic Metal Foam Design for Improved Latent Heat Thermal Energy Storage in a Tilted Enclosure, Int. J. Mech. Sci., 238 (2023), 107830
  32. Ghalambaz, M., et al., Mathematical Modeling of Heterogeneous Metal Foams for Phase-Change Heat Transfer Enhancement of Latent Heat Thermal Energy Storage Units, Appl. Math. Model., 115 (2023), Mar., pp. 398-413
  33. Wei ,G. S., et al., Experimental Study on the Radiative Properties of Open-Cell Porous Ceramics, Sol. Energy, 149 (2017), June, pp. 13-19
  34. Randrianalisoa, J., et al., Thermal Conductive and Radiative Properties of Solid Foams: Traditional and Recent Advanced Modelling Approaches, C. R. Phys., 15 (2014), 8-9, pp. 683-695
  35. Marri, G. K., et al., Experimental and Numerical Investigations on the Effect of Porosity and PPI Gradients of Metal Foams on the Thermal Performance of a Composite Phase Change Material Heat Sink, Int. Commun. Heat Mass Transfer, 164 (2021), 120454
  36. Kuruneru, S. T. W., et al., Application of Porous Metal Foam Heat Exchangers and the Implications of Particulate Fouling for Energy-Intensive Industries, Chem. Eng. Sci., 228 (2020), 115968
PDF VERSION [DOWNLOAD]
Experimental study of photothermal conversion of heat absorbers filled with metal foams of different pore densities

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence