THERMAL SCIENCE
International Scientific Journal
INVESTIGATIONS OF THERMOHYDRAULIC PERFORMANCE IN HEAT EXCHANGER TUBE WITH RECTANGULAR VORTEX GENERATORS
ABSTRACT
To demonstrate the rationalization of multi-longitudinal swirls in heat exchanger tubes, this paper investigates the thermohydraulic performance of heat exchanger tube with rectangular vortex generator using numerical simulation. Comparative analyses of rectangular vortex generators and their different slotted structures are conducted, along with the investigation of the effect of the longitudinal pitch (P = 0.1 m, 0.2 m and 0.3 m) of the rectangular vortex generators on the thermohydraulic performance. The research reveals that the multi-longitudinal swirls induced by the vortex generator inside the tube accelerate the exchange of cold and hot fluids, improve the field synergies of velocity vectors and temperature gradients, and enhance the heat transfer efficiency of the heat exchanger tube. The slotted structure reduces the flow resistance and lowers the degree of disturbance to the fluid, which reduces the strength of the multi-longitudinal swirls, thus weakening the overall performance of the heat exchanger. The strength of the multi-longitudinal swirls has a direct influence on the overall performance of the heat exchanger tube. With the increase of P, the performance evaluation criteria (PEC) of the heat exchanger tubes decreases, and the maximum PEC = 1.44 is obtained for P = 100 mm at the studied Reynolds number range.
KEYWORDS
PAPER SUBMITTED: 2023-11-27
PAPER REVISED: 2024-01-12
PAPER ACCEPTED: 2024-01-25
PUBLISHED ONLINE: 2024-04-14
THERMAL SCIENCE YEAR
2024, VOLUME
28, ISSUE
Issue 4, PAGES [2917 - 2928]
- Wang, Y. J., et al., Effect of Shell on Performance of Heat Exchanger with Trefoil-Hole Baffle, Thermal Science, 26 (2022), 6B, pp. 4897-4907
- Zheng, N. B., et al., A Review on Single-Phase Convective Heat Transfer Enhancement Based on Multi-Longitudinal Vortices in Heat Exchanger Tubes, Applied Thermal Eng., 164 (2020), 114475
- Ekrani, S. M., et al., Multi-Objective Optimization of a Tubular Heat Exchanger Enhanced with Delta Winglet Vortex Generator and Nanofluid Using a Hybrid CFD-SVR Method, International Journal of Thermal Sciences, 186 (2023), 108141
- Meng, J. A., et al., Field Synergy Optimization and Enhanced Heat Transfer by Multi-Longitudinal Vortexes Flow in Tube, International Journal of Heat and Mass Transfer, 48 (2005), Apr., pp. 3331-3337
- Khaboshan, H. N., et al., The Effect of Multi-Longitudinal Vortex Generation on Turbulent Convective Heat Transfer Within Alternating Elliptical Axis Tubes with Various Alternative Angles, Case Studies in Thermal Engineering, 12 (2018), Apr., pp. 237-247
- Wang, Y. J., et al., Design and Optimization on Symmetrical Wing Longitudinal Swirl Generatorsin Circular Tube for Laminar Flow, International Journal of Heat and Mass Transfer, 193 (2022), 122961
- Batule, P., et al., Heat Transfer and Pressure Drop Performance Improvement Using Curved CircularSpines for Flow Through Circular Pipe, Ther. Science and Eng. Pro., 42 (2023), 101884
- Xiao, H., et al., Turbulent Heat Transfer Enhancement in the Mini-Channel by Enhancing the Original Flow Pattern with V-Ribs, International Journal of Heat and Mass Transfer, 163 (2020), 120378
- Liu, P., et al., Heat Transfer Enhancement for Laminar Flow in a Tube Using Bidirectional Conical Strip Inserts, International Journal of Heat and Mass Transfer, 127 (2018), Sept., pp. 1064-1076
- Lv, J. Y., et al., Active Design for the Tube Insert of Center-Connected Deflectors Based on the Principle of Exergy Destruction Minimization, Int. J. of Heat and Mass Transfer, 150 (2020), 119260
- Ali, S., et al., The 3-D Numerical Study of Heat Transfer and Mixing Enhancement in a CircularPipe Using Self-Sustained Oscillating Flexible Vorticity Generators, Chemical Engineering Science, 162 (2017), Dec., pp. 152-174
- Mohammed, H. A., et al., Heat Transfer Augmentation of Parabolic Trough Solar Collector Receiver's Tube Using Hybrid Nanofluids and Conical Turbulators, Journal of the Taiwan Institute of Chemical Engineers, 125 (2021), July, pp. 215-242
- Koolnapadol, N., et al., Effect of Pitch Spring of Delta-Winglets on Thermal Characteristics in a Heat Exchanger Tube, Journal of Research and Applications in Mechanical Engineering, 4 (2016), 2, pp. 1-9
- Xu,Y., et al., Experimental Study of Thermal Performance and Flow Behaviour With Winglet Vortex Generators in a Circular Tube, Applied Thermal Engineering, 135 (2018), Jan., pp. 257-268
- Promvonge, P., et al., Thermal Performance Enhancement in a Heat Exchanger Tube Fitted With Inclined Vortex Rings, Applied Thermal Engineering, 62 (2014), 1, pp. 285-292
- Sun, Z. Q., et al., Investigations of the Turbulent Thermal-Hydraulic Performance in Circular Heat Exchanger Tubes with Multiple Rectangular Winglet Vortex Generators, Applied Thermal Engineering, 168 (2020), 114838
- Samruaisin, P., et al., Influence of Regularly Spaced Quadruple Twisted Tape Elements on Themal Enhancement Characteristics, Chemical Engineering and Processing-Process Intensification, 128 (2018), Apr., pp. 114-123
- Keklikcioglu, O., Ozceyhan, V., Experimental Investigation on Heat Transfer Enhancement of a Tube with Coiled-Wire Inserts Installed with a Separation From the Tube Wall, International Communications in Heat and Mass Transfer, 78 (2016), Sept., pp. 88-94
- Promvonge, P., Skullong, S., Augmented Heat Transfer in Tubular Heat Exchanger Fitted with V-Baffled Tapes, International Journal of Thermal Sciences, 155 (2020), 106429
