THERMAL SCIENCE

International Scientific Journal

EXPERIMENTAL INVESTIGATION AND THERMAL ANALYSIS OF COUPLER-ROCKER BALL BEARING

ABSTRACT
Ball bearings are widely used in many machineries and industrial applications. Thermal behaviour of oscillating ball bearings is unknown due to its complex pendulum-like motion and is discussed in this research. In this research, the effect of operating conditions of the oscillating bearing performing coupler-rocker motion on the heat generation is experimentally investigated and verified using mathematical model. For this purpose, a coupler-rocker bearing testing rig was designed and fabricated and the test bearing is splash-lubricated in an oil sump. The loading of test bearing was done using two extension springs. The applied load on the bearing was varied from 0 to 750 N while the crank rpm was varied from 1200 rpm to 1800 rpm. Three lubricant grades were used namely, SAE30, SAE40, and SAE50. Experimental results showed that the temperature of coupler-rocker bearing approaches steady-state at about 12 minutes for all cases. The steady-state temperatures at variable conditions are observed to follow a linear trend.
KEYWORDS
PAPER SUBMITTED: 2019-01-26
PAPER REVISED: 2019-03-22
PAPER ACCEPTED: 2019-03-25
PUBLISHED ONLINE: 2019-04-07
DOI REFERENCE: https://doi.org/10.2298/TSCI190126111J
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2020, VOLUME 24, ISSUE Issue 6, PAGES [3781 - 3793]
REFERENCES
  1. Salah E. M., Baharom. M., and Rashid A., Performance and combustion characteristics of a novel crank-rocker engine. J. Mech. Sci. Technol, 31, (2017), 7, pp. 3563-3571.
  2. Jin, C., Wu, B. and Hu, Y., Heat generation modeling of ball bearing based on internal load distribution. Tribol. Int, 45, (2012), 1, pp. 8-15.
  3. Choi, J. K. and Lee, D. G., Thermal Characteristics of a spindle bearing system with a gear located on the bearing span. Int. J. Mach. Tools Manuf, 38, (1998), 9, pp. 1017-1030.
  4. Jeng, Y. R. and Gao, C. C., Investigation of the ball-bearing temperature rise under an oil-air lubrication system. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol, 215, (2001), 2, pp. 139-148.
  5. Takabi, J. and Khonsari, M. M., Experimental testing and thermal analysis of ball bearings. Tribol. Int, 60, (2013), pp. 93-103.
  6. Min, X., Shuyun, J. and Ying, C., An improved thermal model for machine tool bearings. Int. J. Mach. Tools Manuf, 47, (2007), 1, pp. 53-62.
  7. Immovilli, F. and Cocconcelli, M., Experimental Investigation of Shaft Radial Load Effect on Bearing Fault Signatures Detection. IEEE Trans. Ind. Appl, 53, (2017), 3, pp. 2721-2729.
  8. Mizuta, K., Inoue, T., Takahashi, Y., Huang, S., Ueda, K. and Omokawa, H., Heat transfer characteristics between inner and outer rings of an angular ball bearing. Heat Transf. - Asian Res, 32, (2003), 1, pp. 42-57.
  9. Khonsari, M. M., Jang, J. Y. and Fillon, M., On the Generalization of Thermohydrodynamic Analyses for Journal Bearings. J. Tribol, 118, (1996), 3, pp. 571-579.
  10. Khonsari, M. M., A Review of Thermal Effects in Hydrodynamic Bearings. Part II : Journal Bearings. A S L E Trans, 30, (2008), 1, pp. 26-33.
  11. Babu, S. R. and Dhamotharan, S., Simulation of Temperature Distributions of CNC Lathe Headstock Assembly. Int. J. Mech. Mechatronics Eng, 14, (2014), 6, pp. 99-103.
  12. Qi, L., Zhang, G. and Liu, Y., Modeling and simulation of the thermal network in a space gear-bearing system. 2010 IEEE Int. Conf. Inf. Autom. ICIA, (2010), pp. 201-205.
  13. Wang, L. Q., Chen, G. C., Gu, L and Zheng, D. Z., Operating temperature in high-speed ball bearing. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci, 221, (2007), 3, pp. 353-359.
  14. Moorthy, R. S. and Raja, V. P., An Improved Analytical Model for Prediction of Heat Generation in Angular Contact Ball Bearing. Arab. J. Sci. Eng, 39, (2014), 11, pp. 8111-8119.
  15. Winer, W. O., Bair, S. and Gecim, B., Thermal resistance of a tapered roller bearing. ASLE Trans, 29, (1986), 4, pp. 539-547.
  16. Pouly, F., Changenet, C., Ville, F., Velex, P. and Damiens, B., Power loss predictions in high-speed rolling element bearings using thermal networks. Tribol. Trans, 53, (2010), 6, pp. 957-967.
  17. Pouly, F., Changenet, C., Ville, F., Velex, P. and Damiens, B., Investigations on the power losses and thermal behaviour of rolling element bearings. Proc. Inst. Mech. Eng. Part J J. Eng. Tribol, 224, (2010), 9, pp. 925-933.
  18. Jorgensen, B. R. and Shin, Y. C., Dynamics of Machine Tool Spindle/Bearing Systems Under Thermal Growth. J. Tribol, 119, (1997), 4, pp. 875.
  19. Harris, T. A. and Kotzalas, M. N., Rolling Bearing Analysis, revised 5th ed. Taylor & Francis, (2006).
  20. Jamil. A., Baharom. M. B., and Lemma. T. A., Mathematical Modelling and Transient Thermal Analysis of Coupler-Rocker Bearing. MATEC Web Conf, 225, (2018).
  21. Stein, J. L. and Tu, J. F., A State-Space Model for Monitoring Thermally Induced Preload in Anti-Friction Spindle Bearings of High-Speed Machine Tools. J. Dyn. Syst. Meas. Control, 116, (1994), 3, pp. 372-386.
  22. Bejan. A., Convection Heat Transfer, 4th ed. John Wiley & Sons, (2013).
  23. Jang, J. Y., Khonsari, M. M. and Pascovici, M. D., Modeling aspects of a rate-controlled seizure in an unloaded journal bearing. Tribol. Trans, 41, (1998), 4, pp. 481-488.
  24. Khonsari, M. M. and Booser, E. R., Applied Tribology: Bearing Design and Lubrication, 3rd ed. John Wiley & Sons, (2017).

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence