International Scientific Journal


Extended surfaces are frequently used in heat exchanging devices for increasing the heat transfer between a primary surface and the surrounding fluid. Heat transfer augmentation by providing an extended surface to air side, increases weight of the system, obstruct airflow, increases pressure drop and pumping power to keep the fluid stream flowing. These major problems will be minimized with the help of recent developments in the field of nanotechnology that provides an avenue to augment heat transfer by providing a coating of nanometer thickness on the heat exchanger surface. The present work aims to investigate the effect of the nanocoating on the heat exchanger surface with the experiments. The experimental results show that the presence of nanocoating does not have any effect on drag change, where the actual pressure drop of the coil for air velocity of 0.6 m/s, 1.6 m/s is 20 Pa and 60 Pa respectively. For nanocoated surface, 24.2 % improvement in heat transfer rate was observed and transient temperature response of the nanocoated heat exchanger tube is higher than uncoated one for a given experimental conditions.
PAPER REVISED: 2017-04-27
PAPER ACCEPTED: 2017-08-04
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2019, VOLUME 23, ISSUE Issue 2, PAGES [457 - 463]
  1. Pathaka, JA Buchonb, D Breia, J Shawc, J Luntza, S Jinb, "Carbon Nanotube(CNT) fins for the enhanced cooling of shape memory alloy wire",Proc SPIE 6926:6969292K91K-2 (2009).
  2. R Senthilkumar, S Prabhu, M Cheralathan, "Experimental investigation on carbon nano tubes coated brass rectangular extended surfaces" Applied Thermal Engineering 1361-1368,(2013).
  3. R Senthilkumar, A.J.D.Nandhakumar, S.Prabhu, "Analysis of natural convective heat trans-fer of nano coated aluminium fins using taguchi method", Heat and Mass Transfer- Spring-er,(2013).
  4. Chi young lee, Md Mainul Hossain Bhuvia, J Kwang. Kim, "Pool boiling heat transfer with nano-porous surface", International Journal of Heat and Mass Transfer, Vol. 53,pp. 4274, (2010).
  5. Sang M. Kwark, Miguel Amaya, Ratan Kumar, Gilberto Moreno, Seung M. You, "Effects of pressure, orientation, and heater size on pool boiling of water with nanocoated heaters", In-ternational Journal of Heat and Mass Transfer Volume 53, Issues 23-24, Pages 5199-5208, (2012).
  6. Zhenyu Wang, Enhou Han, Fuchun Liu and Wei Ke, "Fire and Corrosion Resistances of Intumescent Nano-coating Containing Nano-SiO2 in Salt Spray Condition", Journal of Materi-als Science & Technology Volume 26, Issue 1, Pages 75-81, (2010).
  7. Mahmood Aliofkhazraei, "Nanocoatings: Size Effect in Nanostructured Films" springer (2011).
  8. Tun-Ping Teng, Tun-Chien Teng, "Enhance heat dissipation for projection lamps by MWCNTs nano-coating", Applied Thermal Engineering,Volume 51, Issues 1-2, Pages 1098-1106, (2013).
  9. Zhiping Xu, Markus J. Buehler, "Nanoengineering Heat Transfer Performance at Carbon Nanotube Interfaces", ACS Nano,VOL. 3 , pages 2767-2775 (2009).
  10. Ramesh K. Shah, P Dusan. Sekulic, "Fundamentals Of Heat Exchanger Design", John Wiley Sons (2003).
  11. Albano Cavaleiro, J. T. M. de Hosson, "Nanostructured Coatings" springer (2006).
  12. Kh. Moavena, M. Rada, M. Taeibi-Rahnic, "Experimental investigation of viscous drag reduction of superhydrophobic nano-coating in laminar and turbulent flows", Experimental Thermal and Fluid Science,Volume 51,Pages 239-243, (2013).
  13. Enright, Ryan, Nicholas Dou, Nenad Miljkovic, Youngsuk Nam, and Evelyn N. Wang. "Condensation on Superhydrophobic Copper Oxide Nanostructures." In ASME 2012 Third In-ternational Conference on Micro/Nanoscale Heat and Mass Transfer, 419. ASME International, 2012.
  14. Hong Wang, Guogeng He, Qiqi Tian, "Effects of nano-fluorocarbon coating on icing", Ap-plied Surface Science Volume 258, Issue 18, Pages 7219-7224, (2012).
  15. Eric Forresta, Erik Williamsonb, Jacopo Buongiornoa, Lin-Wen Huc, Michael Rubnerb, Robert Cohend, "Augmentation of nucleate boiling heat transfer and critical heat flux using nanoparticle thin-film coatings", International Journal of Heat and Mass Transfer Volume 53, Issues 1-3, Pages 58-67, (2010).
  16. Sam Zhang, "Handbook of Nanostructured Thin Films and Coatings" Taylor & Francis Group, (2010 ).
  17. Adrian bejan "Convection heat transfer", John wiley sons 3ed (2004).
  18. Sadik Kakac, "Boilers, evaporators, and condensers", Wiley (1991).
  19. Herrmann Schlichting, K. Gersten,"Boundary-Layer Theory", Springer 8th edition (2000).
  20. M.Necati Ozisik, "Heat transfer - a basic approach", McGraw-Hill (1985).
  21. L Ronald. Lipsman, Jonathan Rosenberg, "A Guide to MATLAB: For Beginners and Expe-rienced Users",Cambridge University Press, (2006).
  22. Tun-Ping Teng, Tun-Chien Teng, "Enhance heat dissipation for projection lamps by MWCNTs nano-coating" Applied Thermal Engineering 51 (2013)

© 2022 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence