THERMAL SCIENCE

International Scientific Journal

AN IN SITU TEMPERATURE CALIBRATION OF A GUARDED HOT PLATE APPARATUS

ABSTRACT
This paper presents design, development, and testing of a custom-made calibration environment for the calibration of temperature sensors applied in a guarded hot plate apparatus for thermal conductivity measurements. Description of an in situ calibration principle and realization are introduced. Results of numerical simulation, as well as those of experimental validation are given in a separate section of the paper. According to the results, proposed in situ calibration by using the applied guarded hot plate apparatus elements improves both accuracy and traceability the of thermal conductivity measurement
KEYWORDS
PAPER SUBMITTED: 2018-04-25
PAPER REVISED: 2018-05-20
PAPER ACCEPTED: 2018-06-06
PUBLISHED ONLINE: 2018-06-17
DOI REFERENCE: https://doi.org/10.2298/TSCI180425176S
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2019, VOLUME 23, ISSUE Issue 2, PAGES [707 - 715]
REFERENCES
  1. Laubitz, M.J., Axial Heat Flow Methods of Measuring Thermal Conductivity, in: Compendium of Thermophysical Property Measurement Methods, Vol. 1 - Survey of Measurement Techniques (Eds. Maglić K. D., et al.), 1984, pp.11-61
  2. Schumann, S.P., Surface Temperature Sensor Calibration: In Situ Technique, ASTM STP 879, Guarded Hot Plate and Heat Flow Meter Methodology, 1985, pp. 220-226
  3. ***, Standard Test Method for Steady-State Heat Flux Measurements and Thermal Conductivity by Means of the Guarded-Hot-Plate Apparatus, ASTM C177-13, 2013
  4. ***, Thermal Insulation - Determination of Steady State Thermal Resistance and Related Properties - Guarded Hot Plate Apparatus, ISO8302:1991, 1991
  5. Terzić, M. M., et al.: Development of a Single-Sided Guarded Hot Plate Apparatus for Traceable Thermal Conductivity Measurements, Thermal Science, 20 (2016), Suppl. 1, pp. S321-S329
  6. Perović, N., Thermal Conductivity of Thermal Insulating Materials using the Guarded Hot Plate Method, B.Sc. Thesis, Faculty of Electrical Engineering, University of Belgrade, 1973. (in Serbian)
  7. Ivković, S., The Effect of Temperature Unbalance to Measured Values of Thermal Conductivity Coefficient, B.Sc. Thesis, Faculty of Mechanical Engineering, University of Belgrade, 1974. (in Serbian)
  8. Stepanić, N.M., Milošević, N.D., Virtual Instrument for Acquisition of Temperature, Electrical Resistance and Voltage Signals using a Keithley 2700 Digital Multimeter with Input Detection, Technical Report NIV-ITE 476/ML, Institute VINČA, Belgrade, 2011 (in Serbian)
  9. ***, Guide to the Expression of Uncertainty in Measurement (GUM), JCGM 100:2008, 2008
  10. Stepanić, N.M., Milošević, N.D., Assessment of Measurement Uncertainty of Thermal Conductivity Values Obtained by Guarded Axial Heat Flow Method, Metrology Congress Oct. 17th -19th 2011 Proceedings, Kladovo, pp. 147-158 (in Serbian)
  11. Stepanić, N.M., Measurement of Thermal Conductivity of Thermally Poor Conductive Materials using the Guarded Hot Plate Method, M.Sc. Thesis, Faculty of Electrical Engineering, University of Belgrade, 2010 (in Serbian)
  12. Kaye, G. W. C., Laby, T. H., Tables of Physical and Chemical Constants, 16th ed., Longman Scientific & Technical, New York, USA, 1995

© 2022 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence