THERMAL SCIENCE

International Scientific Journal

External Links

THE PERFORMANCE OF VAPOR COMPRESSION COOLING SYSTEM AIDED RANQUE-HILSCH VORTEX TUBE

ABSTRACT
In this paper, the Ranque-Hilsch vortex tube (RHVT) aided vapor compression cooling (RHVTC) system and single vapor compression cooling (VCC) system were designed and evaluated by using energy, exergy and economic analysis. The cooling systems were designed for 3 different evaporator temperature and different compressor discharge pressures which were available for refrigerants. The highest value of net present value (NPV) of RHVTC system was calculated as 35836 €. The helical vortex generator of J, 2st RHVT body, control valve angle of 300, 2nd control valve opening position, R-143a were used in this RHVTC system and the operating conditions of this system were T1 of 277.15 K, P2 of 1700 kPa and P8 of 601.325 kPa. For the same system, the COP was calculated as 0.0347 and 0.0409 while exergy efficiency was calculated as 0.0097 and 0.0079 for the summer and winter modes, respectively.
KEYWORDS
PAPER SUBMITTED: 2017-09-19
PAPER REVISED: 2017-11-20
PAPER ACCEPTED: 2017-11-28
PUBLISHED ONLINE: 2018-01-07
DOI REFERENCE: https://doi.org/10.2298/TSCI170919306A
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2019, VOLUME 23, ISSUE Issue 2, PAGES [1189 - 1201]
REFERENCES
  1. Unal, F., Ozkan, D.B., An application of exergo-economic analysis for power plants, Thermal Science Journal, doi.org/10.2298/TSCI170217098U, 2017.
  2. Ranque, G.J., Experiences sur la detente giratoire avec production simulanees 'un echappement d'air chaud et d'air froid, Journal de Physique et Le Radium 7, 112-114, (in French), 1933.
  3. Saidi, M.H., Valipour, M.S., Experimental modeling of vortex tube refrigerator, Applied Thermal Engineering 23, 1971-1980, 2003.
  4. Pourmahmoud, N., Hassanzadeh, A., Moutaby, O., Numerical analysis of the effect of helical nozzles gap on the cooling capacity of Ranque-Hilsch vortex tube, International Journal of Refrigeration 35, 1473-1483, 2012.
  5. Dutta, T., Sinhamahapatra K. P., Bandyopadhyay S. S., Numerical investigation of gas species and energy separation in the Ranque-Hilsch vortex tube using real gas model, International Journal of Refrigeration, 34, 2118-2128, 2011.
  6. Chang, K., Li, Q., Zhou, G., Li, Q., Experimental investigation of vortex tube refrigerator with a divergent hot tube, International Journal of Refrigeration 34, 322-327, 2011.
  7. Xue, Y., Arjomandi, M., Kelso, R., Visualization of the flow structure in a vortex tube, Experimental Thermal and Fluid Science 35, 1514-1521, 2011.
  8. Rahbar, N., Taherian, M., Shateri, M., Valipour, M.S., Numerical investigation on flow behavior and energy separation ın a micro scale vortex tube, Thermal Science 19, 2, 619-630, 2015.
  9. Xue, Y., Arjomandi, M., Kelso, R., Energy analysis within a vortex tube. Experimental Thermal and Fluid Science 52, 139-145, 2014.
  10. Kırmacı, V., Exergy analysis and performance of a counter flow ranque-hilsch vortex tube having various nozzle numbers at different inlet pressures of oxygen and air, International Journal of Refrigeration, 32, 1626-1633, 2009.
  11. Cebeci, I., Kırmacı, V., Topcuoglu, U., The effects of orifice nozzle number and nozzle made of polyamide plastic and aluminum with different ınlet pressures on heating and cooling performance of counter flow Ranque-Hilsch vortex tubes: an experimental ınvestigation, International Journal of Refrigeration In Press, Accepted Manuscript, dx.doi.org/doi:10.1016/j.ijrefrig.2016.07.013, 2016.
  12. Dincer, K., Tasdemir, S., Baskaya, S., Uysal, B. Z., Modeling of the effects of length to diameter ratio and nozzle number on the performance of counterflow Ranque-Hilsch vortex tubes using artificial neural networks, Applied Thermal Engineering, 28, 2380-239, 2008.
  13. Dincer, K., Tasdemir, S., Baskaya, S., Uysal, B. Z., Modeling of the effects of plug tip angle on the performance of counter-flow Ranque-Hilsch vortex tubes using artificial neural networks, Journal of Thermal Science and Technology, 28, 2, 1-7, 2008.
  14. Aydın, O., Baki, M., An experimental study on the design parameters of a counter-flow vortex tube, Energy 31, 2763-2772, 2006.
  15. Markal, B., Aydın, O., Avcı, M., An experimental study on the effect of the valve angle of counter-flow Ranque-Hilsch vortex tubes on thermal energy separation, Experimental Thermal and Fluid Science, 34, 966-971, 2010.
  16. Pouraria, H., Zangooee, M. R., Numerical investigation of vortex tube refrigerator with a divergent hot tube, Energy Procedia, 14, 1554-1559, 2012.
  17. Shamsoddini, R., Khorasani, A. F., A new approach to study and optimize cooling performance of a Ranque-Hilsch vortex tube, International Journal of Refrigeration, 35, 2339-2348, 2012.
  18. Berber, A., Dincer, K., Yılmaz, Y., Ozen, D. N., Rule-based mamdani-type fuzzy modeling of heating and cooling performances of counter-flow Ranque-Hilsch vortex tubes with different geometric construction for steel, Energy, 51, 297-304, 2013.
  19. Avcı, M., 2013. The effects of nozzle aspect ratio and nozzle number on the performance of the Ranque-Hilsch vortex tube, Applied Thermal Engineering, 50, 302-308.
  20. Acar, S.M., Arslan, O., The effect of cold stream of vortex tube on efficiency of the vapor compression refrigeration system, International Conference on Computational and Experimental Science and Engineering (ICCESEN-2014), October 25-29, Antalya, Turkey, 2014.
  21. Acar, S.M., Arat, H., Arslan, O., Thermodynamic Analysis of Ranque-Hilsch Vortex Tube Aided Hybrid Cooling and Drying System, 11th Sustainable Development of Energy, Water and Environment Systems, Lisboa-Portugal, 2016.
  22. Acar, S. M., Arslan, O., Exergo-economic evaluation of a new drying system boosted by Ranque-Hilsch vortex tube, Applied Thermal Engineering, 124, 1-16, 2017.
  23. Acar, S.M., Thermodynamic evaluation and design of Ranque-Hilsch vortex tube aided hybrid cooling and drying system, Dumlupinar University, Institute of Applied Sciences, Ph.D. Thesis, Kutahya, Turkey (in Turkish), 2016.
  24. Acar, S. M., Arslan, O., Performance Analysis of a New Hybrid Cooling - Drying System, Environmental Progress & Sustainable Energy (article in Press DOI:10.1002/ep.12832).
  25. Hooper, F.C., Ambrose, C.W., An improved expansion process for the vapour refrigeration cycle. Proc. 4th Canadian Congr. Applied Mechanics, Montreal, 811-812, 1973.
  26. Collins, R.L., Lovelace, R.B., Experimental study of two-phase propane expanded through the Ranque-Hilsch tube, ASME Journal Heat Transfer, Vol.101, 300-305, 1979.
  27. Nellis, G.F., Klein, S.,A., The Application of Vortex Tubes to Refrigeration Cycles. International Refrigeration and Air Conditioning Conference, Purdue University, USA, 2002, pp. 537.
  28. Sarkar, J., Exergy analysis of vortex tube expansion vapor compression refrigeration system, International Journal of Exergy, 13(4), 431-446, 2013.
  29. REFPROP., NIST Reference Fluid Thermodynamic and Transport Properties. NIST Reference Database. Version 9.0, National Insitiute of Standards and Technology U.S.A., 2010.
  30. Yılmaz, E. A., Price Proposal for Ranque-Hilsch Vortex Tube Supported Cooling System, TESTTEKNIK, 2015.
  31. ***, CSB (T.C. Cevre ve Sehircilik Bakanlıgı), Republic Of Turkey Ministry Of Environment And Urbanization, www.csb.gov.tr, Unit price of cooling unit used in system,
  32. Guler, T., Yucedag, M., Feasibility report of atmosphere controlled cold storage facility. Direct Business Support Program, Fırat Development Agency (in Turkish), 2011.
  33. Yogunlu, A., Yuzeroglu, M., Hopoglu, S., Gokce, S., G., The Analysis And Pre-Feasibility of Frozen Fruit And Vegetable Sector, Fırat Development Agency (in Turkish), 2013.
  34. ***,EMRA, June 29, Energy Market Regulatory Authority board decision. Decision No: 5666, Official Gazette of Turkish Republic No. 29401, (in Turkish), 2015.
  35. ***, CBRT (Central Bank of Republic of Turkish), 2015a, Interest rate, www.tcmb.gov.tr/wps/wcm/connect/tcmb+tr/tcmb+tr/main+menu/duyurular/basin/2015/duy2015-13,
  36. ***, CBRT (Central Bank of Republic of Turkish), Discount rate, 2015b, www.tcmb.gov.tr/wps/wcm/connect/tcmb+tr/tcmb+tr/main+menu/para+politikasi/reeskont+ve+avans+faiz+oranlari,

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence