THERMAL SCIENCE
International Scientific Journal
OPTIMAL PHASE CHANGE TEMPERATURE FOR BUILDING COOLING HEATING AND POWER SYSTEM WITH PCM-TES BASED ON ENERGY STORAGE EFFECTIVENESS
ABSTRACT
Integrating thermal energy storage (TES) equipment with building cooling heating and power (BCHP) system can improve system thermal performance. In this paper, a simplified model of TES-BCHP system composed of a gas turbine, an absorption chiller and TES equipment with phase change materials (PCM) is presented. To evaluate the energy saving effect of PCM-TES, a new index, energy storage effectiveness, is proposed and its relationship with primary energy consumption is established. Aimed at maximizing the energy storage effectiveness, the optimal phase change temperature of the PCM-TES-BCHP system is obtained. The results show that the theoretically optimal phase change temperature is just the geometrical average value of ambient temperature and exhaust gas temperature from gas turbine for ideal PCM-TES equipment with infinite NTU. It also indicates that both energy storage effectiveness and optimal phase change temperature increase with increasing NTU. So improving the thermal performance of PCM-TES device is favourable for increasing energy efficiency and saving primary energy consumption accordingly. This work is of great importance in guiding the optimization design of practical PCM-TES-BCHP systems.
KEYWORDS
PAPER SUBMITTED: 2017-02-22
PAPER REVISED: 2017-08-12
PAPER ACCEPTED: 2017-08-14
PUBLISHED ONLINE: 2017-09-09
THERMAL SCIENCE YEAR
2019, VOLUME
23, ISSUE
Issue 2, PAGES [1085 - 1093]
- Zhang, Y.P., et al., A new approach, based on the inverse problem and variation method, for 285 solving building energy and environment problems: preliminary study and illustrative examples, 286 Building and Environment, 91 (2015), pp. 204-218
- Luis, P.E., et al., A review on buildings energy consumption information', Energy and Buildings, 288 40 (2008), 3, pp. 394-398
- Deng, J., et al., A review of thermally activated cooling technologies for combined cooling, 290 heating and power systems, Progress in Energy and Combustion Science, 37 (2011), pp. 172-203
- Fong, K.F. and Lee, C.K., Investigation on zero grid-electricity design strategies of solid oxide 292 fuel cell trigeneration system for high-rise building in hot and humid climate, Applied Energy, 114 293 (2014), pp. 426-433
- Xiong, F., et al., Optimal phase change temperature for energy storage based on fluctuating loads 295 in building cooling heat and power system, Energy Procedia, 75 (2015), pp. 1360-1365
- Li, C.Z., et al., Influence of energy demands ratio on the optimal facility scheme and feasibility of 297 BCHP system', Energy and Buildings, 40 (2008), 10, pp. 1876-1882
- Wang, J.J., et al., Design optimization and analysis of a biomass gasification based BCHP system: 299 a case study in Harbin, China, Renewable Energy, 71 (2014), pp. 572-583
- Barbieri, E.S., et al., Influence of the thermal energy storage on the profitability of micro-CHP 301 systems for residential building applications, Applied Energy, 97 (2012), pp. 714-722
- Verda, V. and Colella, F., Primary energy savings through thermal storage in district heating 303 networks, Energy, 36 (2011), pp. 4278-4286
- Khan, K.H., et al., Energy conservation in buildings: Cogeneration and cogeneration coupled with 305 thermal energy storage, Applied Energy, 77 (2004), 1, pp. 15-34
- Bogdan, Z. and Kopjar, D., Improvement of the cogeneration plant economy by using heat 307 accumulator, Energy, 31 (2006), pp. 2285-2292
- Campos, C.A., et al., Implications of the modelling of stratified hot water storage tanks in the 309 simulation of CHP plants, Energy Conversion and Management, 52 (2011), pp. 3018-3026
- Katulic, S., et al., A novel method for finding the optimal heat storage tank capacity for a 311 cogeneration power plant, Applied Thermal Engineering, 65 (2014), pp. 530-538
- Fu, L., et al., Laboratory research on combined cooling, heating and power (CCHP) systems, 313 Energy Conversion and Management, 50 (2009), 4, pp. 977-982
- Bailey, J.M., et al., Evaluation of thermal energy storage and recovery for an electrical energy 315 mediator system, Simulation Modelling Practice and Theory, 19 (2011), 4, pp. 1164-1174.
- Chan, H.Y., et al., Review of passive solar heating and cooling technologies, Renewable and 317 Sustainable Energy Reviews, 14 (2010), pp. 781-789
- Pitie, F., et al., Circulating fluidized bed heat recovery/storage and its potential to use coated 319 phase-change-material (PCM) particles, Applied Energy, 109 (2013), pp. 505-513
- Zhang, H.L., et al., Latent heat storage with tubular encapsulated phase change materials (PCMs), 321 Energy, 76 (2014), pp. 66-72
- Zeng, R.L., et al., New concept and approach for developing energy efficient buildings: ideal 323 specific heat for building internal thermal mass, Energy and Buildings, 43 (2011), pp. 1081-1090.
- Fiorentini, M., et al., Development and optimization of an innovative HVAC system with 325 integrated PVT and PCM thermal storage for a net-zero energy retrofitted house, Energy and 326 Buildings, 94 (2015), pp. 21-32
- Zhang, Y., et al., Pre-feasibility of building cooling heating and power system with thermal energy 328 storage considering energy supply-demand mismatch, Applied Energy, 167 (2016), pp. 125-134
- Chen, Y.L., et al., Optimal phase change temperature based on entransy and entropy generation 330 analyses', Journal of Engineering Thermophysics, 33 (2012), 9, pp. 115-118 (in Chinese)
- Teng, X.G., et al., A simple method to determine the optimal gas turbine capacity and operating 332 strategy in building cooling, heating and power system, Energy and Buildings, 80 (2014), pp. 623-630
- Zhang, Y., et al., From heat exchanger to heat adaptor: Concept, analysis and application, Applied 335 Energy, 115 (2014), pp. 272-279