THERMAL SCIENCE
International Scientific Journal
TEMPERATURE AND THRUST FORCE ANALYSIS ON DRILLING OF GLASS FIBER REINFORCED PLASTICS
ABSTRACT
Composite materials are widely used today in many sectors. Glass fiber reinforced plastic composite materials are one of those. Glass fiber reinforced plastic composite materials are preferred due to their high thermal and tensile strength. Although consist of glass fiber reinforced composite materials from multiple layers reduces the machinability of these materials, drilling is a common method of machining for these materials. However, when the drilling parameters are not carefully selected, the material integrity is deteriorated and the desired drilling quality cannot be obtained. In this study, the effect of drilling temperature and thrust force on the material integrity was investigated. The drill bit angle, spindle speed and feedrate parameters are used for the temperature and thrust force analysis.
KEYWORDS
PAPER SUBMITTED: 2018-01-17
PAPER REVISED: 2018-05-15
PAPER ACCEPTED: 2018-06-27
PUBLISHED ONLINE: 2018-09-29
THERMAL SCIENCE YEAR
2019, VOLUME
23, ISSUE
Issue 1, PAGES [347 - 352]
- Grilo, T.J., et al., Experimental Delamination Analyses Of CFRPs Using Different Drill Geometries, Compos. Part B Eng., 45 (2013), 1, pp. 1344-1350
- Kumar, D., et al., Experimental Investigation Of Delamination And Surface Roughness In The Drilling Of GFRP Composite Material With Different Drills, Adv. Manuf. Polym. Compos. Sci., 2 (2016), 2, pp. 47-56
- Zarif Karimi, N., et al., Effect Of The Drilling Process On The Compression Behavior Of Glass/Epoxy Laminates, Compos. Struct., 98 (2013), pp. 59-68
- El-Sonbaty, I., et al., Factors Affecting The Machinability Of GFR/Epoxy Composites, Compos. Struct., 63 (2004), 3-4, pp. 329-338
- Xu, Q., et al., Influence Of Fiberglass Mesh On Flammability Of EPS Used As Insulation Of Buildings, Therm. Sci., 2016 (2016), January
- Ramirez, C., et al., Tool Wear Monitoring And Hole Surface Quality During CFRP Drilling, Procedia CIRP, 13 (2014), pp. 163-168
- Hufenbach, W., et al., Optimisation Of The Rivet Joints Of The CFRP Composite Material And Aluminium Alloy, J. Achiev. Mater. Manuf. Eng., 20 (2007), 1-2, pp. 119-122
- Singh, I., et al., Drilling Of Uni-Directional Glass Fiber Reinforced Plastics: Experimental And Finite Element Study, Mater. Des., 29 (2008), 2, pp. 546-553
- Fernandes, M., Cook, C., Drilling Of Carbon Composites Using A One Shot Drill Bit. Part I: Five Stage Representation Of Drilling And Factors Affecting Maximum Force And Torque, Int. J. Mach. Tools Manuf., 46 (2006), 1, pp. 70-75
- Lin, S.C., Chen, I.K., Drilling Carbon Fiber-Reinforced Composite Material At High Speed, Wear, 194 (1996), 1-2, pp. 156-162
- Chen, W.C., Some Experimental Investigations In The Drilling Of Carbon Fiber-Reinforced Plastic (CFRP) Composite Laminates, Int. J. Mach. Tools Manuf., 37 (1997), 8, pp. 1097-1108
- Chandrasekharan, V., et al., A Mechanistic Approach To Predicting The Cutting Forces In Drilling: With Application To Fiber-Reinforced Composite Materials, J. Eng. Ind., 117 (1995)
- Chandrasekharan, V., A Model To Predict The Three-Dimensional Cutting Force System For Drilling With Arbitrary Point Geometry, University of Illinois at Urbana-Champaign, 1996
- Abrão, A.M., et al., Drilling Of Fiber Reinforced Plastics: A Review, J. Mater. Process. Technol., 186 (2007), 1-3, pp. 1-7
- Sunny, T., et al., Experimental Studies On Effect Of Process Parameters On Delamination In Drilling GFRP Composites Using Taguchi Method, Procedia Mater. Sci., 6 (2014), Icmpc, pp. 1131-1142
- Rajamurugan, T. V., et al., Modelling And Analysis Of Thrust Force In Drilling Of GFRP Composites Using Response Surface Methodology (RSM), Procedia Eng., 38 (2012), pp. 3757-3768
- Ramesh, M., et al., Influence Of Tool Materials On Thrust Force And Delamination In Drilling Sisal-Glass Fiber Reinforced Polymer (S-GFRP) Composites, Procedia Mater. Sci., 5 (2014), pp. 1915-1921
- Karaca, F., et al., Influence Of Orthopaedic Drilling Parameters On Temperature And Histopathology Of Bovine Tibia: An In Vitro Study, Med. Eng. Phys., 33 (2011), 10, pp. 1221-1227
- Bono, M., Ni, J., The Effects Of Thermal Distortions On The Diameter And Cylindricity Of Dry Drilled Holes, Int. J. Mach. Tools Manuf., 41 (2001), 15, pp. 2261-2270
- Kalidas, S., et al., Experimental Investigation Of The Effect Of Drill Coatings On Hole Quality Under Dry And Wet Drilling Conditions, Surf. Coatings Technol., 148 (2001), 2-3, pp. 117-128
- Bono, M., Ni, J., A Method For Measuring The Temperature Distribution Along The Cutting Edges Of A Drill, J. Manuf. Sci. Eng., 124 (2002), 4, pp. 921-923