International Scientific Journal


The performance of a dew-point cooler is analyzed in terms of various parameters including dew point and wet bulb effectiveness. An experimental set-up of a counter-flow heat and mass exchanger based on Maisotsenko cycle evaporation technique is established. The set-up consists of 8 dry channels made of aluminum sheets and 7 wet channels made of kraft paper. Experimental analysis is performed under wide range of operating parameters including air absolute humidity: 12.7 g/kg to 18 g/kg, air temperature 20 to 55°C , and inlet velocities 0.88 to 1.50 m/s. The results indicate that appreciably higher value of dew-point and the wet-bulb effectiveness can be achieved ranging up to a maximum of 93% and to 130%, respectively, at various inlet air conditions. Apart from the ambient air conditions, influence of amount of air diversion to wet side of channel is also studied. It is observed that this design feature of heat and mass exchanger can lead to a substantial increase of dew-point and wet-bulb effectiveness. By varying the inlet to wet side air ratio, a suitable limit of the quantity of inlet air diversion to working side is also suggested.
PAPER REVISED: 2016-11-13
PAPER ACCEPTED: 2016-11-16
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2018, VOLUME 22, ISSUE Issue 6, PAGES [3099 - 3106]
  1. L. Perez-Lombard, J. Ortiz, C. Pout, (2008), A review on buildings energy consumption information, Energy and Buildings 40 394-398.
  2. J.C. Lam, R.Y.C. Chan, C.L. Tang, D.H.W. Li,(2004), Electricity use characteristics of purpose-built office buildings in subtropical climates, Energy Conversion and Management 45 829-844.
  3. J.C. Lam, (2000), Energy analysis of commercial buildings in subtropical climates, Building and Environment 35 19-26.
  4. Caliskan H, Dincer I, Hepbasli A., (2011), Exergetic and sustainability performance comparison of novel and conventional air cooling systems for building applications, Energy Buildings 43 146-172.
  5. M. Saghafifar, M. Gadalla, (2016), Performance assessment of multi-stage solid desiccant air conditioning systems for hot and humid climates using Maisotsenko cooling cycle, Solar Energy 127 79-95.
  6. Idalex Technologies, Inc., The Maisotsenko Cycle Conceptual. Available from <>.
  7. D. Pandelidis, S. Anisimov, W. M. Worek, P. Drąg, (2016), Numerical analysis of a desiccant system with cross-flow Maisotsenko cycle heat and mass exchanger, Energy and Buildings 123 136-150.
  8. M. Saghafifar, M. Gadalla, (2016), Performance assessment of integrated PV/T and solid desiccant air-conditioning systems for cooling buildings using Maisotsenko cooling cycle, Solar Energy 127 79-95.
  9. Ray WT., Conditioning liquids and air and other gases, US Patent Publication No. US 1986529 published on 01-January-1935.
  10. Maclaine-cross IL, Banks PJ., (1981), A general theory of wet surface heat exchangers and its application to regenerative evaporative cooling, Journal of Heat Transfer 103 579-585.
  11. Hsu ST, Lavan Z, Worek W., (1989), Optimization of wet-surface heat exchangers, Energy and Buildings 14 757-770.
  12. M. Saghafifar, M. Gadalla, (2015), Innovative inlet air cooling technology for gas turbine power plants using integrated solid desiccant and Maisotsenk cooler, Energy 87 663-677.
  13. D. Pandelidis, S. Anisimov, W. M. Worek, (2015), Performance study of the Maisotsenko Cycle heat exchangers in different air-conditioning applications, International Journal of Heat and Mass Transfer 81 207-221.
  14. S. Anisimov, D. Pandelidis, J. Danielewicz, (2014), Numerical analysis of selected evaporative exchangers with the Maisotsenko cycle, Energy Conversion and Management 88 426-441.
  15. D. Pandelidis, S, Anisimov, (2015), Numerical analysis of the heat and mass transfer processes in selected M-Cycle heat exchangers for the dew point evaporative cooling, Energy Conversion and Management 90 62-83.
  16. Zhan C, Zhao X, Smith S, Riffat SB., (2011), Numerical study of a M-Cycle cross flow heat exchanger for indirect evaporative cooling, Building Environment 46 657-68.
  17. B. Costelloea, D. Finn, (2003), Indirect evaporative cooling potential in air-water systems in temperate climates, Energy and Buildings 35 573-591.
  18. O. Khalid, M. Ali, N. A. Sheikh, H. M. Ali, M. Shehryar, (2016), Experimental analysis of an improved Maisotsenko cycle design under low velocity conditions, Applied Thermal Engineering 95 288-295.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence