THERMAL SCIENCE
International Scientific Journal
HIGHLY ALIGNED ELECTROSPUN NANOFIBERS BY HOT-DRAWING
ABSTRACT
Aligned polyacrylonitrile nanofibers were prepared by a modified
electrospinning. Hot-drawing was used to improve the properties of the obtained nanofibers. Experiment revealed great changes in degree of alignment, crystallization, exothermic peak, and mechanical properties of nanofibers.
KEYWORDS
PAPER SUBMITTED: 2015-01-10
PAPER REVISED: 2015-05-05
PAPER ACCEPTED: 2015-05-12
PUBLISHED ONLINE: 2015-10-25
THERMAL SCIENCE YEAR
2015, VOLUME
19, ISSUE
Issue 4, PAGES [1357 - 1360]
- Pagliara, S., et al., Electrospun Light-Emitting Nanofibers as Excitation Source in Microfluidic Devices, Lab on a Chip, 9 (2009), 19, pp. 2851-2856
- Meine, A. J., et al., Optimization Strategies for Electrospun Silk Fibroin Tissue Engineering Scaffolds, Biomaterials, 30 (2009), 17, pp. 3058-3067
- Zhu, Z., et al., Aligned Electrospun ZnO Nanofibers for Simple and Sensitive Ultraviolet Nanosensors, Chemical Communications, 18 (2009), May, pp. 2568-2570
- Tamura, T., et al., Aligned Electrospun Nanofiber Composite Membranes for Fuel Cell Electrolytes, Nano Letters, 10 (2010), 4, pp. 1324-1328
- Marja, R., et al., Effect of Hot Drawing on Properties of Wet-Spun Poly(L,D-Lactide) Copolymer Multifilament Fibers, Journal of Applied Polymer Science, 115 (2009), 1, pp. 608-615
- Leenslag, J. W., Pannings, A. J., High-Strength Poly(L-Lactide) Fibres by a Dry-Spinning/Hot-Drawing Process, Polymer, 28 (1987), 10, pp. 1695-1702
- Postema, A. R., Pannings, A. J., Study on the Drawing Behavior of Poly(L-Lactide) to Obtain High-Strength Fibers, Journal of Applied Polymer Science, 37 (1989), 8, pp. 2351-2369
- Miaudet, P., et al., Hot-Drawing of Single and Multiwall Carbon Nanotube Fibers for High Toughness and Alignment, Nano Letters, 5 (2005), 11, pp. 2212-2215
- Liu, H., et al., Thermal Treatment for Nanofibrous Membrane, Thermal Science, 18 (2014), 5, pp. 1673- 1675