THERMAL SCIENCE

International Scientific Journal

NUMERICAL STUDY ON THE COMBUSTION PROCESS OF A BIOGAS SPARK-IGNITION ENGINE

ABSTRACT
The fuel called biogas is obtained through anaerobic digestion of different types of organic waste, providing a way to tap the energy stored in organic matter. The use of this fuel is also attractive from the standpoint of global warming because its application does not register a net emission of carbon dioxide into the atmosphere. One possible use for this fuel is to feed the spark-ignition internal combustion engines. In the present, there is little information available about the process of combustion in internal combustion engines fueled by biogas. The combustion process of an internal combustion engine ignition powered by biogas is characterized in terms of the duration of combustion, i.e., depending on the time elapsed while the reactants (methane and oxygen) are transformed into products (mainly carbon dioxide and water). This study numerically evaluates the way in which the geometrical parameters such as the compression ratio and operating parameters like engine speed, the excess air, the time of spark timing and carbon dioxide content of biogas affect the evolution of the combustion process. To carry out this study, a five factors and two levels experiment was designed and conducted, based on which, the most influential parameters were identified. Equations expressing the combustion characteristic parameters, as a function of the geometric and operation parameters of a spark ignited engines, are delivered as a result.
KEYWORDS
PAPER SUBMITTED: 2011-11-15
PAPER REVISED: 2012-06-13
PAPER ACCEPTED: 2012-07-21
DOI REFERENCE: https://doi.org/10.2298/TSCI111115152C
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2013, VOLUME 17, ISSUE Issue 1, PAGES [241 - 254]
REFERENCES
  1. Houdková L., Borán J., Pecek J., Sumpela P., Biogas - a renewable source of energy. Thermal Science,12 (2008), No. 4, pp. 27-33.
  2. Bond T., Venkataraman C., Masera O., Global atmospheric impacts of residential fuels, Energy for Sustainable Development, 8(2004), No. 3 l. pp. 20-32.
  3. Pipatmanomai S., Kaewluan S.,, Vitidsant T., Economic assessment of biogas-to-electricity generation system with H2S removal by activated carbon in small pig farm, Applied Energy, 86(2009), No. 5, pp. 669-674.
  4. Jawurek H. H., Lane N. W., Rallis C. J. Biogas/petrol dual fuelling of SI engine for rural third world use, Biomass, 13 (1987), No. 2, pp. 87-103.
  5. Kanaiyalal B., Development of a single cylinder SI engine for 100% biogas operation ME thesis, Indian Institute of Science. India, 2006.
  6. Mueller G. P., Landfill gas application development of the Caterpillar G3600 spark-ignited gas engine, J. Eng. Gas Turbines Power, 117(1995), No.4, pp. 820-826.
  7. Tippayawong N., Promwungkwa A., Rerkkriangkrai A., Long-term operation of a small biogas/diesel dual-fuel engine for on-farm electricity generation, Biosystems engineering, 98(2007), No. 1, pp 26-32.
  8. Heywood J. B., Internal Combustion Engine Fundamentals 1988.
  9. Raine Z., Zhang G., Pflug A., Comparison of Emissions from Natural Gas and Gasoline Fuelled Engines - Total Hydrocarbon and Methane Emissions and Exhaust Gas Recirculation Effects, SAE Paper 970743, 1997
  10. Vianna S., Gouvela R., Pessoa E., Study of the effects of intake temperature on the performance of turbocharged gas - powered engines, SAE paper 921494, 1992.
  11. Jingdang H., Crookes R. J., Assessment of simulated biogas as a fuel for the spark ignition engine, Fuel, 77(1998), No. 15, pp. 1793-1801.
  12. Porpatham E., Ramesh A., Nagalingam B. Investigation on the effect of concentration of methane in biogas when used as a fuel for a spark ignition engine Fuel, 87(2009), No. 8, pp. 1651-1659.
  13. Huang J., Crookes R.J., Spark-ignition engine performance with simulated biogas: a comparison with gasoline and natural gas, Fuel and Energy Abstracts, 40(1999), No.4, pp. 283.
  14. Beretta, G.P., Rashidi, M., and keck, J.C., Turbulent Flame Propagation and Combustion in Spark Ignition Engines, Combust. Flame, 53(1983), pp. 217-245.
  15. Klein M., Single-zone cylinder pressure modeling and estimation for heat release analysis of SI engines Liu-Tryck, Linköpink, Sweden, 2007.
  16. Günter P. Merker · Christian Schwarz Gunnar Stiesch · Frank Otto. Simulation of combustion and pollutant formation for engine-development. Springer-Verlag, Germany, 2006
  17. D. C. Wilcox. Turbulence Modeling for CFD. DCW Industries, Inc., La Canada, California, 1998.
  18. Gran I. R., Magnussen B. F., A numerical study of a bluff-body stabilized diffusion flame. part 2. influence of combustion modeling and finite-rate chemistry, Combustion Science and Technology 119(1996), 191.
  19. Carrera, J. L., Ideal and air-fuel simulation of internal combustion engines trough burning laws (in Spanish language). ME Thesis, Universidad de Guanajuato, México, 2007
  20. Jafari A., Kazemzadeh S., Effect of fuel and engine operational characteristics on the heat loss from combustion chamber surfaces of SI engines, International Communications in Heat and Mass Transfer, 33(2006), pp. 122- 134.
  21. Yasar O., A new iginiton model for spark ignition simulations, Parallel computing, 27(2001), No.1 pp. 179-200.
  22. Zhichao T., Reitz R. An ignition and combustion model based on the level-set method for spark ignition engine multidimensional modeling, Combustion and Flame, 145(2006), 1, pp. 1-15..
  23. Dinler N., Yucel N., Combustion simulation in a spark ignition engine cylinder: effects of air-fuel ratio on the combustion duration, Thermal science, 14(2010), 4, pp. 1001-1012.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence