THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

Authors of this Paper

External Links

online first only

Temperature and thrust force analysis on drilling of glass fiber reinforced plastics (GFRP)

ABSTRACT
Composite materials are widely used today in many sectors. Glass fiber reinforced plastic (GFRP) composite materials are one of those. Glass fiber reinforced plastic composite materials are preferred due to their high thermal and tensile strength. Although consist of glass fiber reinforced composite materials from multiple layers reduces the machinability of these materials, drilling is a common method of machining for these materials. However, when the drilling parameters are not carefully selected, the material integrity is deteriorated and the desired drilling quality cannot be obtained. In this study, the effect of drilling temperature and thrust force on the material integrity was investigated. The drill bit angle, spindle speed and feedrate parameters are used for the temperature and thrust force analysis.
KEYWORDS
PAPER SUBMITTED: 2018-01-17
PAPER REVISED: 2018-05-15
PAPER ACCEPTED: 2018-06-27
PUBLISHED ONLINE: 2018-09-29
DOI REFERENCE: https://doi.org/10.2298/TSCI180117181U
REFERENCES
  1. Grilo, T.J., et al., Experimental Delamination Analyses Of CFRPs Using Different Drill Geometries, Compos. Part B Eng., 45 (2013), 1, pp. 1344-1350
  2. Kumar, D., et al., Experimental Investigation Of Delamination And Surface Roughness In The Drilling Of GFRP Composite Material With Different Drills, Adv. Manuf. Polym. Compos. Sci., 2 (2016), 2, pp. 47-56
  3. Zarif Karimi, N., et al., Effect Of The Drilling Process On The Compression Behavior Of Glass/Epoxy Laminates, Compos. Struct., 98 (2013), pp. 59-68
  4. El-Sonbaty, I., et al., Factors Affecting The Machinability Of GFR/Epoxy Composites, Compos. Struct., 63 (2004), 3-4, pp. 329-338
  5. Xu, Q., et al., Influence Of Fiberglass Mesh On Flammability Of EPS Used As Insulation Of Buildings, Therm. Sci., 2016 (2016), January
  6. Ramirez, C., et al., Tool Wear Monitoring And Hole Surface Quality During CFRP Drilling, Procedia CIRP, 13 (2014), pp. 163-168
  7. Hufenbach, W., et al., Optimisation Of The Rivet Joints Of The CFRP Composite Material And Aluminium Alloy, J. Achiev. Mater. Manuf. Eng., 20 (2007), 1-2, pp. 119-122
  8. Singh, I., et al., Drilling Of Uni-Directional Glass Fiber Reinforced Plastics: Experimental And Finite Element Study, Mater. Des., 29 (2008), 2, pp. 546-553
  9. Fernandes, M., Cook, C., Drilling Of Carbon Composites Using A One Shot Drill Bit. Part I: Five Stage Representation Of Drilling And Factors Affecting Maximum Force And Torque, Int. J. Mach. Tools Manuf., 46 (2006), 1, pp. 70-75
  10. Lin, S.C., Chen, I.K., Drilling Carbon Fiber-Reinforced Composite Material At High Speed, Wear, 194 (1996), 1-2, pp. 156-162
  11. Chen, W.C., Some Experimental Investigations In The Drilling Of Carbon Fiber-Reinforced Plastic (CFRP) Composite Laminates, Int. J. Mach. Tools Manuf., 37 (1997), 8, pp. 1097-1108
  12. Chandrasekharan, V., et al., A Mechanistic Approach To Predicting The Cutting Forces In Drilling: With Application To Fiber-Reinforced Composite Materials, J. Eng. Ind., 117 (1995)
  13. Chandrasekharan, V., A Model To Predict The Three-Dimensional Cutting Force System For Drilling With Arbitrary Point Geometry, University of Illinois at Urbana-Champaign, 1996
  14. Abrão, A.M., et al., Drilling Of Fiber Reinforced Plastics: A Review, J. Mater. Process. Technol., 186 (2007), 1-3, pp. 1-7
  15. Sunny, T., et al., Experimental Studies On Effect Of Process Parameters On Delamination In Drilling GFRP Composites Using Taguchi Method, Procedia Mater. Sci., 6 (2014), Icmpc, pp. 1131-1142
  16. Rajamurugan, T. V., et al., Modelling And Analysis Of Thrust Force In Drilling Of GFRP Composites Using Response Surface Methodology (RSM), Procedia Eng., 38 (2012), pp. 3757-3768
  17. Ramesh, M., et al., Influence Of Tool Materials On Thrust Force And Delamination In Drilling Sisal-Glass Fiber Reinforced Polymer (S-GFRP) Composites, Procedia Mater. Sci., 5 (2014), pp. 1915-1921
  18. Karaca, F., et al., Influence Of Orthopaedic Drilling Parameters On Temperature And Histopathology Of Bovine Tibia: An In Vitro Study, Med. Eng. Phys., 33 (2011), 10, pp. 1221-1227
  19. Bono, M., Ni, J., The Effects Of Thermal Distortions On The Diameter And Cylindricity Of Dry Drilled Holes, Int. J. Mach. Tools Manuf., 41 (2001), 15, pp. 2261-2270
  20. Kalidas, S., et al., Experimental Investigation Of The Effect Of Drill Coatings On Hole Quality Under Dry And Wet Drilling Conditions, Surf. Coatings Technol., 148 (2001), 2-3, pp. 117-128
  21. Bono, M., Ni, J., A Method For Measuring The Temperature Distribution Along The Cutting Edges Of A Drill, J. Manuf. Sci. Eng., 124 (2002), 4, pp. 921-923