THERMAL SCIENCE

International Scientific Journal

External Links

THERMAL ANALYSIS AND OPTIMIZATION OF HIGH POWER LED ARMATURE

ABSTRACT
It is an effective way of energy conservation to use high power LED armature in street lighting. However, there exists some restrictions in front of the usage of that, like overheating of LED chips and high weight of armature case. Generally, aluminum heat sinks are attached to housing of the armature to get effective working of LED armature. In this study, a street type high power LED armature has been modeled numerically, transient thermal system has been analyzed and the results have been compared with experimental results in order to decrease the armature weigh and increase efficiency. Also, in experimental studies thermal camera and thermocouples have been used for thermal measurements. Finally, multi-objective optimization has been performed to decrease the armature weight, while keeping maximum temperature on armature between in safely working interval.
KEYWORDS
PAPER SUBMITTED: 2017-07-04
PAPER REVISED: 2017-09-06
PAPER ACCEPTED: 2017-11-17
PUBLISHED ONLINE: 2017-12-03
DOI REFERENCE: https://doi.org/10.2298/TSCI170704238S
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2019, VOLUME 23, ISSUE Issue 2, PAGES [637 - 646]
REFERENCES
  1. G.B. Pan, L.N. Shi, B. Liang, Y.H. Pi, Illumination Energy Conservation Analysis of Reflective Material on the Tunnel Sidewall, Advances in Industrial and Civil Engineering, Pts 1-4, 594-597 (2012) 1197-1200.
  2. H. Kaase, S. Aydinli, S. Gramm, Energy-efficient lighting in museums, taking conservation into account, Bauphysik, 35 (2013) 205-211.
  3. J. Gobinath, M.V. Kumar, M. Lenin, Recent Approach for Energy Conservation and User Fulfillment Using Automated LED Lighting System in Buildings through Wireless Network, 2013 International Conference on Green Computing, Communication and Conservation of Energy (ICGCE), (2013) 28-33.
  4. S. Panjavaranont, P. Bhasaputra, W. Pattaraprakorn, K. Tirawannavit, C. Kumpeerakupt, S. Rimsmutchai, N. Pawanawichien, The Optimal Design of Lighting Systems for Designated Office Building in Thailand According to Ministerial, the Type or Size of Building Standards and Rules and Procedures, Building Design for Energy Conservation, Act BE2552, 2011 International Conference and Utility Exhibition on Power and Energy Systems: Issues & Prospects for Asia (Icue), (2011).
  5. IsbakCorporation, Technical Specification of 110W Street Type Power LED Armature, in: Outdoor Lighting Armature Catalog, Istanbul, Turkey, 2012.
  6. H.J. Round, Electr. World, 49 (1907) 308
  7. O.V. Losev, Telegrafi ya i Telefoniya bez Provodov 44 (1927) 485-494
  8. R.N. Hall, R.O. Carlson, T.J. Soltys, G.E. Fenner, J.D. Kingsley, Coherent Light Emission from Gaas Junctions, Physical Review Letters, 9 (1962) 366-&.
  9. N. Holonyak, S.F. Bevacqua, Coherent (Visible) Light Emission from Ga(As1-Xpx) Junctions, Applied Physics Letters, 1 (1962) 82-83.
  10. M.I. Nathan, W.P. Dumke, G. Burns, F.H. Dill, G. Lasher, Stimulated Emission of Radiation from Gaas P-N Junctions, Applied Physics Letters, 1 (1962) 62-64.
  11. S. Nakamura, T. Mukai, M. Senoh, Candela-Class High-Brightness Ingan/Algan Double-Heterostructure Blue-Light-Emitting Diodes, Applied Physics Letters, 64 (1994) 1687-1689.
  12. T. Nishida, H. Saito, N. Kobayashi, Efficient and high-power AlGaN-based ultraviolet light-emitting diode grown on bulk GaN, Applied Physics Letters, 79 (2001) 711-712.
  13. R.W. Mills, A. Uhl, G.B. Blackwell, K.D. Jandt, High power light emitting diode (LED) arrays versus halogen light polymerization of oral biomaterials: Barcol hardness, compressive strength and radiometric properties, Biomaterials, 23 (2002) 2955-2963.
  14. R.S. West, Side emitting High Power LED's and their application in illumination, Solid State Lighting Ii, 4776 (2002) 171-175.
  15. T. Xiaogai, Wei, C., Jiyong, Z., Thermal design for the high-power LED lamp, Journal of Semiconductors, 32 (2011).
  16. Y.K. Huaiyu, S. Zeijli, H. Gielen, A. W. J. Guoqi, Z, A review of passive thermal management of LED module, Journal of Semiconductors, 32 (2011).
  17. T. Dong, An Analysis of Heat Transfer in LED Luminaires, (2010).
  18. D. Jang, S.H. Yu, K.S. Lee, Multidisciplinary optimization of a pin-fin radial heat sink for LED lighting applications, International Journal of Heat and Mass Transfer, 55 (2012) 515-521.
  19. F. Hou, D. Yang, G. Zhang, Thermal analysis of LED lighting system with different fin heat sinks, Journal of Semiconductors, 32 (2011) 014006.
  20. R. Wang, J. Li, A Cooling System with a Fan for Thermal Management of High-Power LEDs, Journal of Modern Physics, 01 (2010) 196-199.
  21. T. Cheng, X.B. Luo, S.Y. Huang, S. Liu, Thermal analysis and optimization of multiple LED packaging based on a general analytical solution, International Journal of Thermal Sciences, 49 (2010) 196-201.
  22. M. Arik, C. Becker, S. Weaver, J. Petroski, Thermal management of LEDs: Package to system, Third International Conference on Solid State Lighting, 5187 (2004) 64-75.
  23. E. Madenci, I. Guven, The finite element method and applications in engineering using ANSYS, Springer, New York, 2006.
  24. M. Şahbaz, Mechanical and Thermal Design and Optimization of Street Type LED Armatures, MSc thesis, Marmara University, Istanbul/TURKEY, 2014.
  25. M. Şahbaz, A. Kentli, M. Yılmaz, H. Köten, Y. Yükselentürk, Modelling and thermal analysis of high power LED armature, in: International Symposium on Computing in Science and Engineering, EbscoHost, ProQuest, 2013.
  26. L. Chen., Integrated Robust Design Using Response Surface Methodology and Constrained Optimization, in: Applied Science in Systems Design Engineering, Vol. M.Sc., University of Waterloo, Ontario, Canada, 2008.
  27. C.J.M. Lasance, et al, Thermal Management for LED Applications, Springer, 2014; X. Luo, et. al, Prog. Energ. Combus. 56 (2016) 1-32; Y. Xi, et. al, Appl. Phys. Lett. 85 (12) (2004) 2163-2165.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence