TY - JOUR
TI - Numerical study on the naturally captured air volume of outside cabin heat exchanger for wind power generation
AU - Zhou Nianyong
AU - Guo Yixing
AU - Liu Wenbo
AU - Feng Hao
AU - Peng Haoping
AU - Lei Yun
AU - Deng Song
AU - Zhao Lei
JN - Thermal Science
PY - 2022
VL - 26
IS - 6
SP - 5069
EP - 5080
PT - Article
AB - In this paper, the outside cabin heat exchanger based on the porous media approach was established. The effects of altitude, viscous resistance coefficient, inertial resistance coefficient, and core thickness on the naturally captured air volume of the heat exchanger were investigated by numerical simulation. Results showed that the naturally captured air volume of the heat exchanger tends to be larger on both sides and smaller in the middle, and there is a quasi-linear increase proportional to the incoming wind velocity. With the increment of altitude, viscous resistance coefficient, and inertial resistance coefficient, the average naturally captured air volume of the heat exchangers shows a downward trend. The trend would be clear with the increment of the incoming wind velocity, nevertheless, the effect of core thickness is weak. In addition, the design values of the viscous resistance coefficient and the inertial resistance coefficient should be restricted in the order of 106 and below 500, respectively. Based on the weak effect of the naturally captured air volume of the heat exchanger, the thickness of the core can be appropriately increased to ensure the heat transfer area of the heat exchanger.