TY - JOUR
TI - Observation on a fire whirl in a vertical shaft using high-speed camera and associated correlation derived
AU - Hung Hing Yeung
AU - Han Shousuo
AU - Chow Wan Ki
AU - Chow Cheuk Lun
JN - Thermal Science
PY - 2021
VL - 25
IS - 2
SP - 1001
EP - 1012
PT - Article
AB - The fire whirl generated by burning a pool fire in a vertical shaft with a single corner gap of appropriate width was studied using a high-speed camera. A 7 cm diameter pool propanol fire with heat release rate 1.6 kW in free space was burnt inside a 145 cm tall vertical shaft model with gap widths lying between 2 cm and 16 cm. The flame height was between 0.25 m and 0.85 m for different gap widths. Photographs taken using a high-speed camera at critical times of swirling motion development were used to compare with those taken using a normal camera. From the experimental observations on flame swirling by a high-speed camera, stages for generating the fire whirl were identified much more accurately. Two flame vortex tubes moving over the horizontal burning surface of the liquid pool were observed. Based on these observations a set of more detailed schematic diagrams on the swirling motion was constructed. From the observed flame heights under different gap widths and using three assumptions on the variation of air entrainment velocity with height, an empirical expression relating the burning rate with flame height and the corner gap width was derived from the observation with high-speed camera. The correlation expression of the burning rate of the pool fire obtained would be useful in fire safety design in vertical shafts of tall buildings.