TY - JOUR
TI - Investigation of effects on heat transfer and flow characteristics of Cr-Ni alloy and aluminum pins placed in AISI 304 tube
AU - Berber Adnan
AU - Bagirsakci Kazım
AU - Gurdal Mehmet
JN - Thermal Science
PY - 2020
VL - 24
IS - 3
SP - 1999
EP - 2011
PT - Article
AB - In this study, the effects of cylindrical aluminum and Cr-Ni alloy pins placed in different arrangements on the inner wall of the pipe in the turbulent flow, the effects of heat transfer and flow characteristics on different Reynolds numbers have been experimentally investigated. The experiments were carried out under forced flow and constant heat flow conditions. Air is preferred as the fluid and the fluid velocity is adjusted between Reynolds number of 10000 and 50000. It has been observed that the Nusselt values obtained over the number of Reynolds number for the 5 different test tubes are arranged in a line from large to small, sequential row aluminum pin, sequential row Cr-Ni alloy pin, diagonal row aluminum pin, diagonal row Cr-Ni alloy pin, plain tube. There are also CFD analysis for each material, arrangements and pins geometry sets. On the other hand, it was determined that friction coefficient is directly proportional to the increase of heat transfer coefficient. As a result, it is observed that experimental results are compatible with both literature and numerical study.