TY - JOUR TI - Influence of friction stir welding parameters on properties of 2024 T3 aluminium alloy joints AU - Eramah Abdsalam M AU - Rakin Marko P AU - Veljić Darko M AU - Tadić Srđan S AU - Radović Nenad A AU - Zrilić Milorad AU - Perović Milenko M JN - Thermal Science PY - 2014 VL - 18 IS - 11 SP - 21 EP - 28 PT - Article AB - The aim of this work is to analyse the process of friction stir welding (FSW) of 3mm thick aluminium plates made of high strength aluminium alloy - 2024 T3, as well as to assess the mechanical properties of the produced joints. FSW is a modern procedure which enables joining of similar and dissimilar materials in the solid state, by the combined action of heat and mechanical work. This paper presents an analysis of the experimental results obtained by testing the butt welded joints. Tensile strength of the produced joints is assessed, as well as the distribution of hardness, micro-and macrostructure through the joints (in the base material, nugget, heat affected zone and thermo-mechanically affected zone). Different combinations of the tool rotation speed and the welding speed are used, and the dependence of the properties of the joints on these parameters of welding technology is determined. [Projekat Ministarstva nauke Republike Srbije, br. TR 34018 i br. TR 35006]