TY - JOUR TI - Scandinavian baffle boiler design revisited AU - Stepanov Borivoj Lj AU - Pešenjanski Ivan K AU - Spasojević Momčilo Đ JN - Thermal Science PY - 2015 VL - 19 IS - 1 SP - 305 EP - 316 PT - Article AB - The aim of this paper is to examine whether the use of baffles in a combustion chamber, one of the well-known low-cost methods for the boiler performance improvement, can be enhanced. Modern day tools like computational fluid dynamics were not present at the time when these measures were invented, developed and successfully applied. The objective of this study is to determine the influence of location and length of a baffle in a furnace, for different mass flows, on gas residence time. The numerical simulations have been performed of a simple Scandinavian stove like furnace. The isothermal model is used, while air is used as a medium and turbulence is modeled by realizable k-epsilon model. The Lagrange particle tracking is used for the residence time distribution determination. The statistical analysis yielded the average residence time. The results of the computational fluid dynamics studies for different baffle positions, dimensions and flow rates show from up to 17% decrease to up to 13 % increase of residence time. The conclusion is that vertical position of the baffle is the most important factor, followed by the length of the baffle, while the least important showed to be the mass flow. [Projekat Ministarstva nauke Republike Srbije, br. III 43008: Development of methods, sensors and systems for monitoring of quality of water, air and land]