THERMAL SCIENCE

International Scientific Journal

EFFECT OF THREE AND FIVE HOLES NOZZLE ON THERMAL EFFICIENCY AND EMISSION CHARACTERS OF DI-CI DIESEL ENGINE WITH LEMONGRASS BIODIESEL AS ALTERNATE FUEL

ABSTRACT
The performance and emissions characters of Diesel engine behavior depend largely on several criteria, fuel injection nozzle plays a vital role in the proper combustion of Diesel engines. This research analyzes the impact of a nozzle hole configuration on the features of a biodiesel-fuelled Diesel engine. Therefore, the causes are dependent on the modification that the nozzle hole was selected from three-hole and five-hole nozzles, while the engine characteristics of the lemongrass biodiesel blend with diesel were examined. Lemongrass biodiesel with 20% blend, LGB B20, has been investigated experimentally with different engine loads with respect to brake power, three-hole, and five-hole nozzles. The experimental investigation showed an improvement in peak i.e. highest heat release rate of 12.5% for three- and five-hole nozzle and brake specific fuel consumption of 15% is increased in single hole nozzle and it is observed it’s diminished in three- and five-holed nozzle. Further, the brake thermal efficiency is increased in the five-hole nozzle in comparison to the three-hole nozzle at full load condition. Furthermore emission characteristics like HC, CO, and smoke are de-creased with an increase in the number of nozzles, at the penalty of increase in NOx emissions has been observed.
KEYWORDS
PAPER SUBMITTED: 2021-09-20
PAPER REVISED: 2021-11-18
PAPER ACCEPTED: 2021-12-09
PUBLISHED ONLINE: 2022-01-02
DOI REFERENCE: https://doi.org/10.2298/TSCI210920357K
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2022, VOLUME 26, ISSUE Issue 2, PAGES [1197 - 1205]
REFERENCES
  1. C. Nandakumar et.al. Effect of nozzle hole geometry on the operation of kapok biodiesel in a diesel engine, Fuel 276 (2020) 118114, doi.org/10.1016/j.fuel.2020.118114.
  2. Reddy N et.al. Investigation of Influence of Injector Opening Pressure and Nozzle Geometry on the Performance and Emission Characteristics of DI Diesel Engine with CAOME, European Journal of Sustainable Development Research, 3(4), 2019 doi.org/10.29333/ejosdr/5787.
  3. Prakash S et.al. Experimental analysis of diesel engine behaviours using biodiesel with different exhaust gas recirculation rates, International Journal of Ambient Energy (2020), DOI: 10.1080/01430750.2020.1712251.
  4. Javed T et.al. Combustion-Based Transportation in a Carbon-Constrained World—A Review. Pollutants from Energy Sources. Singapore: Springer; 2019. p. 7-34.
  5. C. Thiagarajan et al. Heat transfer analysis and optimization of engine cylinder liner using different materials, Materials Today: Proceedings 33 (2020) 778-783
  6. Channappagoudra M et.al. Comparative study of standard engine and modified engine with different piston bowl geometries operated with B20 fuel blend. Renew Energy 2019;133:216-32.
  7. Aboelazayem et.al. (2018). Biodiesel production from castor oil in Egypt: Process optimisation, kinetic study, diesel engine performance and exhaust emissions analysis. Energy, 157, 843e852. doi.org/10.1016/j.energy.2018.05.202
  8. Barajas Forero, C. L. et.al. (2005). Biodiesel from castor oil: a promising fuel for cold weather. The Renewable Energy & Power Quality Journal, 1(3). doi.org/10.24084/repqj03.222
  9. Prabhahar M et.al. Investigation of pine oil methyl ester blends with diesel on a compression ignition engine to control oxides of nitrogen and soot particles. Rasayan Journal of Chemistry (2017) 10(4) 1075-1079. DOI: 10.7324/RJC.2017.1041847
  10. Arunkumar et.al. (2019). Experimental studies on engine performance and emission characteristics using castor biodiesel as fuel in CI engine. Renewable Energy, 131, 737e744. doi.org/10.1016/j.renene.2018.07.096
  11. B. Saravana Kumar et.al. Performance and Emission Analysis of Four Stroke Diesel Engine by Varying its Fuel Injection Nozzle Holes on a VCR Engine, Special Issue - 2019, International Journal of Engineering Research & Technology (IJERT)
  12. Prakash S et.al. Experimental studies on the performance and emission characteristics of an automobile engine fueled with fish oil methyl ester to reduce environmental pollution, Energy Procedia (2019) 160 412-419. DOI: 10.1016/j.egypro.2019.02.175.
  13. Cenk Sayin et.al. "Influence of injector hole number on the performance and emissions of a DI diesel engine fueled with biodiesel-diesel fuel blends" Elsevier Publications, Applied Thermal Engineering 61 (2013).
  14. Prabhu L et al., 2014, Performance and emission characteristics of a diesel engine using nanoparticle as additive with biodiesel 250 ppm , International Journal of Applied Engineering Research, Vol. 9, No. 23 pp. 18759-18770, Research India Publications
  15. Cenk Sayin et.al. Influence of injector hole number on the performance and emissions of a DI diesel engine fueled with biodieselediesel fuel blends Applied Thermal Engineering 61 (2013)
  16. R.Thirunavukkarasu et.al. Investigation on Single, Four And Five Holes Fuel Injector Nozzle on Performance And Emission Characteristic of Diesel on A VCR Engine by Using Ceramic Coating Material on The Piston Crown, Materials Today: Proceedings 5 (2018) 7577-7585
  17. Javed T et.al. Combustion-Based Transportation in a Carbon-Constrained World—A Review. Pollutants from Energy Sources. Singapore: Springer; 2019. p. 7-34.
  18. Alabbad M et.al. (2018) Autoignition of straight-run naphtha: a promising fuel for advanced compression ignition engines. Combust Flame 189:337-346
  19. Attard WP et.al. (2012a) Spark Ignition and pre-chamber turbulent jet ignition combustion visualization. SAE Technical Papers
  20. Bunce M et.al. Sub-200 g/kWh BSFC on a light duty gasoline engine. SAE Technical Paper
  21. Cui H et.al.Chinaʻs new energy vehicle mandate policy (Final Rule). Policy update. ICCT report
  22. Som DE. et.al. Effect of nozzle orifice geometry on spray, combustion, and emission characteristics under diesel engine conditions. Fuel 2011; 90(3): 1267-1276.
  23. Schmidt et.al. The internal flow of diesel fuel injector nozzles: a review. Int J Engine Res 2001; 2: 1-21.
  24. Ranz, WE. Some experiments on orifice sprays. Can J Chem Engng 1958; 36(4): 175-181.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence