THERMAL SCIENCE

International Scientific Journal

External Links

THERMO-HYDRAULIC PERFORMANCE EVALUATION OF HEAT EXCHANGER TUBE WITH VORTEX GENERATOR INSERTS

ABSTRACT
This work is undertaken as a scientific experiment to test a new design of a turbulent generator. The current research experiments the influence of novel vortex generator inserts on heat transfers within a tube under a uniform heat flux. A Cu tube with a 45 mm inner diameter and 1350 mm length is used along with a solid disc injector (swirl generator) that comprises ten crescent holes with equal circumferential distribution angles around the disk canter. Subsequently, a swirl flow is generated by deviating the stream flow 45° causing it to spin in the direction of the axial flow. Flow directors are on 45ᵒ angles toward the axial direction for each of the crescent holes. This study is an example of flow degradation. Reynolds numbers range from 6000 to 13500. Therefore, fluid-flow is treated as a turbulent system. All experiments done with air are regarded as a power fluid and Prandtl number is fixed at about 0.71. Thermo-hydraulic performance of heat exchanger is analyzed. The average heat transfer Nusselt number is calculated and discussed. The experiment found out that Nusselt number increases with an increase in Reynolds number as well as the number of swirl generators. At four vortex generators, the maximum augmentation in heat transfer is around 4.3 times greater than the plain tube and friction factor is about 1.28 with 5 vortex generators insets. The results indicate a promising heat exchanger enhancement in the local petroleum industries.
KEYWORDS
PAPER SUBMITTED: 2021-05-28
PAPER REVISED: 2021-08-13
PAPER ACCEPTED: 2021-08-19
PUBLISHED ONLINE: 2021-10-10
DOI REFERENCE: https://doi.org/10.2298/TSCI210528289H
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2022, VOLUME 26, ISSUE Issue 2, PAGES [1545 - 1555]
REFERENCES
  1. Meyer, J.P., Olivier, J.A., Transitional flow inside enhanced tubes for fully developed and developing flowwith different types of inlet disturbances: part I - adiabatic pressure drops, Int. J. Heat Mass Transf., 54 (2011), 7, pp. 1587-1597.
  2. Sadeghzadeh, Heidar, Aliehyaei, Mehdi., Rosen, A., Optimization of a Finned Shell and Tube Heat Exchanger Using a Multi-Objective Optimization Genetic Algorithm, sustainability, 7 (2015), pp. 11679-11695.
  3. Attalla, M. and Maghrabie, H., An experimental study on heat transfer and fluid flow of rough plate heat exchanger using Al2O3/water nanofluid, Exp. Heat Transf., 33 (2020), 3, pp. 261-281.
  4. Salih, I., Thermal Characterization of Turbulent Flow in a Tube With Discrete Coiled Wire Insert, J. Eng. Dev., 18 (2017), 1, pp. 1-12.
  5. Al-Obaidi, A., Sharif, A., Investigation of the three-dimensional structure, pressure drop, and heat transfer characteristics of the thermohydraulic flow in a circular pipe with different twisted-tape geometrical configurations, J Therm Anal Calorim 143 (2021), pp.3533-3558
  6. Samruaisin, P., Effect of sparsely placed twisted tapes installed with multiple-transverse twisted-baffles on heat transfer enhancement, J. Therm. Anal. Calorim., 140 (2020), 3, pp. 1159-1175.
  7. Kuma, A., Chamol, S., Kuma, M., Experimental investigation on thermal performance and fluid flow characteristics in heat exchanger tube with solid hollow circular disk inserts, Appl. Therm. Eng., 100 (2018), pp. 227-236.
  8. Sheikholeslami M., Review of heat transfer enhancement methods: Focus on passive methods using swirl flow devices, Renew. Sustain. Energy Rev., 49 (2015), pp. 444-469.
  9. İrfa , K., F., Gü çime , A i, K., Kaya, M., Effect of Swirl Generator Inserted Into a Tube on Exergy Transfer: Decaying Flow, Exp. Heat Transf., 27 (2014), 5, pp. 472-487.
  10. H. Gü , Heat transfer enhancement in circular tubes using helical swirl generator insert at the entrance, Int. J. Therm. Sci., 46 (2007), 12, pp. 1297-1303.
  11. Ahmadvand, M., Najafi, A.F., Shahidinejad, S., An experimental study and CFD analysis towards heat transfer and fluid flow characteristics of decaying swirl pipe flow generated by axial vanes, Meccanica, 45 (2010), 1, pp. 111-129.
  12. Jafari, M., Farajollahi, A., Gazori, H., The experimental investigation concerning the heat transfer enhancement via a four-point star swirl generator in the presence of water-ethylene glycol mixtures, J Therm Anal Calorim, 144 (2021), pp.167-178
  13. Bali, T., Ayhan, S., Exergy analysis of heat transfer in a turbulent pipe flow by a decaying swirl generator, Int. J. Exergy, 5 (2008), 1, pp. 64-77.
  14. Menni, Y., Chamkha, A., Ameur, H., Inc, M.., Enhancement of the hydrodynamic characteristics in shell-and-tube heat exchangers by using W-Baffle vortex generators, Period. Polytech. Mech. Eng., 64 (2020), 3, pp. 212-223.
  15. Ameur, H., Effect of corrugated baffles on the flow and thermal fields in a channel heat exchanger, J. Appl. Comput. Mech., 6 (2020), 2, pp. 209-218.
  16. Chavda, N., Parekh, P., Experimental and Exergy Analysis of A Double Pipe Heat Exchanger for Parallel Flow Arrangement, J. Eng. Res. Appl., 4 (2014), pp. 09-13.
  17. Sivasubramaniam, A. P., Kavandappa, G., Murugesan, P., Heat Transfer and Friction Factor Characteristics of Pipe-In-Pipe Heat Exchanger Fitted with Variant Plain Tape Insert, Thermal Science, 24 (2020), 1B, pp. 623-633.
  18. Jasim, Q., Improving Thermal Performance Uing AL2O3-Water Nanoflouid in a Double Pipe Heat Exchanger Filling with Porous Medium, Thermal Science, 24 (2020), 6, pp. 4267-4275.
  19. Söze , A., Güç üer, S., Ki i ç, C., The Heat Transfer Enhancement of Concurrent Flow and Counter Current Flow Concentric Tube Heat Exchangers by Uing Hexagonal Boron Nitride-Water Nanofluid, Thermal Science, 23 (2019), 6, pp. 3917-3928.
  20. Haghshenasfard, M., Talaie, k., Mohammad, R., Nasr, S., Numerical and Experimental Investigation of Heat Transfer of ZnO/WATER Nanoflouid in the Concentric Tube and Plate Heat Exchangers, Thermal Science, 15 (2011), 1, pp. 183-194.
  21. Meyer, J., Olivier, JA., Transitional flow inside enhanced tubes for fully developed and developing flow with different types of inlet disturbances: Part I - Adiabatic pressure drops, Int. J. Heat Mass Transf., 54 (2011), 7, pp. 1587-1597.
  22. Robert, M., Describing the uncertainties in experimental results, Exp. Therm. Fluid Sci., 1 (1988), pp 3-17.
  23. Shah, R., Sekulic, D., Fundamentals of Heat Exchanger Design, John Wiley and Sons Inc., New York, USA, 2003.
  24. Eiamsa-Ard, S., Kongkaitpaiboon, V., Nanan, K., Thermohydraulics of turbulent flow through heat exchanger tubes fitted with circular-rings and twisted tapes, Chinese J. Chem. Eng., 21 (2013), 6, pp. 585-593.
  25. Promvonge, P., Thermal augmentation in circular tube with twisted tape and wire coil turbulators, Energy Convers. Manag., 49 (2008), no. 11, pp. 2949-2955.
  26. Promvonge, P., Eiamsa-Ard, S., Heat transfer in a circular tube fitted with free-spacing snail entry and conical-nozzle turbulators, Int. Commun. Heat Mass Transf., 34 (2007), 7, pp. 838-848.
  27. Promvonge, P., Heat transfer behaviors in round tube with conical ring inserts, Energy Convers, 1 (2008), 49, pp 8-15.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence