THERMAL SCIENCE

International Scientific Journal

Authors of this Paper

External Links

NUMERICAL STUDY ON HEAT TRANSFER AND FLOW RESISTANCE CHARACTERISTICS OF MULTI-HEAD TWISTED SPIRAL TUBE

ABSTRACT
A numerical calculation model of multihead twisted spiral tube was established. In the range of Reynolds number from 5000 to 35000, the influence of different twisted structure on the flow and heat transfer characteristics of the multihead twisted spiral tube was studied by numerical calculation. Numerical calculation results indicate that the Nusselt number and friction coefficient increase with the increase in the ratio of outside and inside diameter of the cross-section, the increase in the number of twisted nodes, and the increase in the number of twisted spiral tube heads. Under the condition of the same spiral structure and the same hydraulic diameter, the heat transfer performance of the multihead twisted spiral tube is better than that of the spiral smooth tube. In addition, through artificial neural network analysis, the ratio of outside and inside diameter of the cross-section, number of twisted nodes, and the number of twisted spiral tube heads were optimized to promote the comprehensive heat transfer performance. The performance evaluation criterion is the highest when the ratio of outside and in-side diameter of the cross-section is 25/22.5, the number of twisted nodes is 3, and the number of twisted spiral tube heads is 3, which is 1.849 of the spiral smooth tube.
KEYWORDS
PAPER SUBMITTED: 2021-02-24
PAPER REVISED: 2021-04-19
PAPER ACCEPTED: 2021-04-27
PUBLISHED ONLINE: 2021-06-05
DOI REFERENCE: https://doi.org/10.2298/TSCI210224206Z
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2022, VOLUME 26, ISSUE Issue 2, PAGES [1880 - 1895]
REFERENCES
  1. Liu S, Sakr M. A comprehensive review on passive heat transfer enhancements in pipe exchangers, Renewable and Sustainable Energy Reviews, 19(2013), pp. 64-81
  2. E B A. Heat transfer enhancement-the encouragement and accommodation of high heat fluxes, JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 119(1995), pp. 8-19
  3. Mishra P, Gupta S N. Momentum Transfer in Curved Pipes. 2. Non-Newtonian Fluids, Industrial & engineering chemistry process design and development, 18(1979), 1, pp. 137-142
  4. Cioncolini A, Santini L. On the laminar to turbulent flow transition in diabatic helically coiled pipe flow, Experimental Thermal and Fluid Science, 30(2006), 7, pp. 653-661
  5. Gupta R, Wanchoo R K, Jafar Ali T R M. Laminar Flow in Helical Coils: A Parametric Study, Industrial & Engineering Chemistry Research, 50(2011), 2, pp. 1150-1157
  6. Bozzoli F, Cattani L, Rainieri S. Effect of wall corrugation on local convective heat transfer in coiled tubes, International Journal of Heat and Mass Transfer, 101(2016), pp. 76-90
  7. Dong X, Jin X, Li P, et al. Experimental research on heat transfer and flow resistance properties in spiral twisted tube heat exchanger, Applied Thermal Engineering, 176(2020), pp. 115397
  8. Kongkaitpaiboon V, Promthaisong P, Chuwattanakul V, et al. Effects of spiral start number and depth ratio of corrugated tube on flow and heat transfer characteristics in turbulent flow region, Journal of Mechanical Science and Technology, 33(2019), 8, pp. 4005-4012
  9. Rainieri S, Bozzoli F, Cattani L, et al. Compound convective heat transfer enhancement in helically coiled wall corrugated tubes, International Journal of Heat and Mass Transfer, 59(2013), pp. 353-362
  10. Wang W, Zhang Y, Li B, et al. Influence of geometrical parameters on turbulent flow and heat transfer characteristics in outward helically corrugated tubes, Energy Conversion and Management,136(2017), pp. 294-306
  11. Wang W, Zhang Y, Li Y, et al. Numerical study on fully-developed turbulent flow and heat transfer in inward corrugated tubes with double-objective optimization, International Journal of Heat and Mass Transfer, 120(2018), pp. 782-792
  12. Akbarzadeh M, Rashidi S, Esfahani J A. Influences of corrugation profiles on entropy generation, heat transfer, pressure drop, and performance in a wavy channel, Applied thermal engineering, 116(2017) pp. 278-291
  13. Khoshvaght-Aliabadi M, Feizabadi A, Khaligh S F. Empirical and numerical assessments on corrugated and twisted channels as two enhanced geometries, International journal of mechanical sciences, 157-158(2019), pp.25-44
  14. Tang X, Dai X, Zhu D. Experimental and numerical investigation of convective heat transfer and fluid flow in twisted spiral tube, International Journal of Heat and Mass Transfer, 90(2015), pp.523-541
  15. Yang S, Zhang L, Xu H. Experimental study on convective heat transfer and flow resistance characteristics of water flow in twisted elliptical tubes, Applied Thermal Engineering, 31(2011), 14-15, pp. 2981-2991
  16. Kareem Z S, Mohd Jaafar M N, Lazim T M, et al. Passive heat transfer enhancement review in corrugation, Experimental Thermal and Fluid Science, 68(2015), pp. 22-38
  17. Jin Z, Liu B, Chen F, et al. CFD analysis on flow resistance characteristics of six-start spirally corrugated tube, International Journal of Heat and Mass Transfer, 103(2016), pp. 1198-1207
  18. Zaboli M, Nourbakhsh M, Ajarostaghi S S M. Numerical evaluation of the heat transfer and fluid flow in a corrugated coil tube with lobe-shaped cross-section and two types of spiral twisted tape as swirl generator, Journal of Thermal Analysis and Calorimetry, (2020).
  19. Han H, Li B, Wu H, et al. Multi-objective shape optimization of double pipe heat exchanger with inner corrugated tube using RSM method, International journal of thermal sciences, 90(2015), pp. 173-186
  20. Rogers G F C, Mayhew Y R. Heat transfer and pressure loss in helically coiled tubes with turbulent flow, International Journal of Heat and Mass Transfer, 11(1964), pp. 1207-1216
  21. Ito H. Friction Factors for Turbulent Flow in Curved Pipes, Journal of Basic Engineering, 81(1959), pp.129-134
  22. Verma T N, Nashine P, Singh D V, et al. ANN: Prediction of an experimental heat transfer analysis of concentric tube heat exchanger with corrugated inner tubes, Applied Thermal Engineering, 120(2017), pp. 219-227

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence