THERMAL SCIENCE

International Scientific Journal

CONTINUOUS SLOW DYNAMIC SLOPE APPROACH FOR STATIONARY BASE INTERNAL COMBUSTION ENGINE MAPPING

ABSTRACT
Engine control optimization, with its always growing complexity, is in permanent focus of engine researchers and developers all over the world. Automotive engines are dominantly used in dynamic conditions, but generally, steadystate operating points are used for building up mathematical models which are later subject to the numerical optimization. For this purpose, a large amount of steadystate regimes needs to be evaluated through experimental work at the engine test stand, which is an extremely time and funds consuming process. Consequently, the methodology for data gathering during engine dynamic excitation could lead to significant savings at the expense of acceptable data accuracy loss. The slow dynamic slope method starting from a stationary operating point was evaluated by several authors in the past. In this paper, slow dynamic slope method with exclusively transient excitation will be presented drawing attention to some of its advantages and drawbacks. The rate of change of engine load as a main control parameter during dynamic test is of great importance for the quality of the final data and for total test duration. In this regard, several tests of different duration were applied for fixed engine speed values to cover engine speed-load usage domain. An approximation of stationary testing results obtained in this way could be used for evaluation of the map gradients and thus as a guide-line for additional stationary tests based on design of experiment method.
KEYWORDS
PAPER SUBMITTED: 2019-03-08
PAPER REVISED: 2019-05-01
PAPER ACCEPTED: 2019-05-03
PUBLISHED ONLINE: 2019-05-12
DOI REFERENCE: https://doi.org/10.2298/TSCI190308171M
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2020, VOLUME 24, ISSUE Issue 1, PAGES [147 - 158]
REFERENCES
  1. L. Guzzella and A. Sciarretta, Vehicle Propulsion Systems: Introduction to Modeling and Optimization, 3rd ed. Berlin Heidelberg: Springer-Verlag, 2013.
  2. M. Hirz, "Basics of longitudinal vehicle dynamics," Tongji University, School of Automotive Studies, 2015.
  3. Murakami Y. et al., "Slow Dynamic Slopes (SDS) Methodology Applied for a Stratified Gasoline Engine," presented at the Design of Experiments in Engine Development III, Renningen, 2007, pp. 413-423.
  4. Leithgöb R., M. Bollig, Büchel M., and Henzinger F., "Methodology for efficient calibration of model based ECU structures," presented at the 1. International Symposium für Entwicklungsmethodik, Wiesbaden, 2005, pp. 195-210.
  5. N. Keuth, M. Thomas, H. Pflügl, E. Martini, and S. Bergold, "Utilization of the Slow Dynamic Slope Methodology for the Calibration of the ECU-Functions ‘Air Charge Determination' and ‘Torque Prediction' in the Series Production," in Design of Experiments (DoE) in Engine Development: modern development methods to meet new challenges, 2009, pp. 122-136.
  6. N. Miljić, S. Popović, P. Mrđa, and M. Kitanović, "Slow Dynamic Slope method in IC engine benchmarking," Therm. Sci., vol. 22, no. 3, pp. 1271-1283, 2018.
  7. N. Tietze, "Model-based Calibration of Engine Control Units Using Gaussian Process Regression," Ph.D. Thesis, Technische Universität, Darmstadt, 2015.
  8. "AVL CAMEO 4." AVL LIST GmbH Graz, 2018.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence