THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

online first only

Effects of gaseous slip flow and temperature jump on entropy generation rate in rectangular microducts

ABSTRACT
In this study, the influence of slip flow and temperature jump on the entropy generation rate are investigated in rectangular microducts. The Knudsen numbers are considered in the range between 0.001 and 0.1, and the aspect ratio lies between 0 and 1. The dimensionless governing equations are solved numerically using Chebyshev Spectral collocation method, and the dimensionless velocity and temperature gradients are employed in the entropy generation model. The influences of the dimensionless numbers including Bejan number and irreversibility distribution ratio on the entropy generation rates are investigated and discussed through surface plots and contour diagrams. It is demonstrated that the minimum entropy generation rate exists corresponding to an optimal aspect ratio for each dimensionless number. This minimum entropy generation rate depends upon the nature of dimensionless numbers.
KEYWORDS
PAPER SUBMITTED: 2018-11-15
PAPER REVISED: 2019-01-07
PAPER ACCEPTED: 2019-01-11
PUBLISHED ONLINE: 2019-02-17
DOI REFERENCE: https://doi.org/10.2298/TSCI181115029G
REFERENCES
  1. . Bejan, A., Entropy Generation Minimization, CRC, New York 1996
  2. . Bejan, A., Entropy Generation Minimization: The New Thermodynamics of Finite-Size Devices and Finite-Time Processes, Journal of Applied Physics, 79 3 (1996), pp. 1191-1218
  3. . Bejan, A., Thermodynamic Optimization of Geometry in Engineering Flow Systems, Exergy, an International Journal, 1 4, (2001), pp. 269-277
  4. . Bejan, A., Fundamentals of Exergy Analysis, Entropy Generation Minimization, and the Generation of Flow Architecture, International Journal of Energy Research, 26, (2002), pp. 545-565
  5. . Carrington, C. G., et al., Second law analysis of combined heat and mass transfer in internal and external flows, International Journal of Heat and Fluid Flow, 13 (1992), 1, pp. 65-70
  6. . Nag, P. K., et al., Second law optimization of convective heat transfer through a duct with constant heat flux. International journal of energy research, 13 (1989), 5, pp.537-543.
  7. . Şahin, A. Z., Irreversibilities in various duct geometries with constant wall heat flux and laminar flow, Energy, 23 (1998),6, pp. 465-473.
  8. . Demirel, Y., et al., (1999). Entropy generation in a rectangular packed duct with wall heat flux, International journal of heat and mass transfer, 42 (1999), 13, pp. 2337-2344.
  9. . Tasnim, S. H., et al., Entropy generation in a porous channel with hydromagnetic effect, Exergy, An International Journal, 2(2002), 4, pp. 300-308
  10. . Hooman, K., et al., Heat transfer and entropy generation optimization of forced convection in a porous-saturated duct of rectangular cross-section, International Journal of Heat and Mass Transfer, 50 (2007), pp. 2051-2059
  11. . HoomanK., et al., Analysis of heat transfer and entropy generation for a thermally developing Brinkman-Brinkman forced convection problem in a rectangular duct with isoflux walls, International Journal of Heat and Mass Transfer, 50 (2007), 21-22, 4180-4194
  12. . Yadav, S. L., et al., Ashok Kumar Singh, Analysis of Entropy Generation in a Rectangular Porous Duct, Journal of Applied Mathematics and Physics, 4 (2016), 7, pp.1336-1343
  13. . Silva, R.L., et al., Temperature and entropy generation behavior in rectangular ducts with 3-D heat transfer coupling (conduction and convection), International Communications in Heat and Mass Transfer, 35 (2008), pp. 240-250
  14. . Öztop, H. F., et al., Entropy generation through hexagonal cross‐sectional duct for constant wall temperature in laminar flow, International journal of energy research, 28 (2004), 8, pp. 725-737
  15. . Sahin, A. Z., et al., A simple method of determining entropy generation rate in viscous fluid flow through ducts, Arabian Journal for Science and Engineering, 39 (2014) 2, pp. 1241-1249
  16. . Ko, T. H., et al., Entropy generation and optimal analysis for laminar forced convection in curved rectangular ducts: a numerical study, International Journal of Thermal Sciences, 45 (2006), 2, pp. 138-150.
  17. . Ko, T. H., Numerical investigation on laminar forced convection and entropy generation in a curved rectangular duct with longitudinal ribs mounted on heated wall, International Journal of Thermal Sciences, 45 (2006), 4, pp. 390-404.
  18. . Cheng, K.C., et al., Laminar forced convection heat transfer in curved rectangular channels, International Journal of heat and mass Transfer, 13 (1970), pp. 471-490.
  19. . Esfahani, J. A., et al., Accuracy analysis of predicted velocity profiles of laminar duct flow with entropy generation method, Applied Mathematics and Mechanics, 34 (2013), 8, pp. 971-984.
  20. . Wu, S. Y., et al., Exergy transfer characteristics of forced convective heat transfer through a duct with constant wall temperature, Energy, 32 (2007), 12, pp. 2385-2395.
  21. . Hooman, K., Entropy generation for microscale forced convection: effects of different thermal boundary conditions, velocity slip, temperature jump, viscous dissipation, and duct geometry, International Communications in Heat and Mass Transfer, 34 (2007), 8, 945-957.
  22. . Ghodoossi, L., Prediction of heat transfer characteristics in rectangular microchannels for slip flow regime and H1 boundary condition, International Journal of Thermal Sciences, 44 (2005), 6, pp. 513-520.
  23. . Khan, W. A., et al., Optimization of Microchannel Heat Sinks Using Entropy Generation Minimization Method,Twenty-Second Annual IEEE Semiconductor Thermal Measurement And Management Symposium, (2006), pp. 78-86.
  24. . Duan, Z., et al., Slip flow in non-circular microchannels. Microfluidics and Nanofluidics, 3 (2007), 4, pp. 473-484
  25. . Gorla, R. S. R., et al., Second law analysis for microscale flow and heat transfer, Applied Thermal Engineering, 27 (2007), 8-9, pp. 1414-1423.
  26. . Ebrahimi, A., et al., Heat transfer and entropy generation in a microchannel with longitudinal vortex generators using nanofluids, Energy, 101 (2016), pp. 190-201.
  27. . Awad, M. M., A review of entropy generation in microchannels, Advances in Mechanical Engineering, 7 (2015), 12, 1687814015590297.
  28. . Kuddusi, L. Entropy generation in rectangular microchannels, International Journal of Exergy, 19 (2016), 1, pp. 110-139.
  29. . Baghani, M., et al., Gaseous slip flow forced convection in microducts of arbitrary but constant cross section, Nanoscale and Microscale Thermophysical Engineering, 18 (2014) 4, pp. 354-372.
  30. . Hooman, K., Heat transfer and entropy generation for forced convection through a microduct of rectangular cross-section: Effects of velocity slip, temperature jump, and duct geometry, International Communications in Heat and Mass Transfer, 35 (2008), pp. 1065-1068.