THERMAL SCIENCE

International Scientific Journal

A REVIEW ON THERMOELECTRIC-HYDRAULIC PERFORMANCE AND HEAT TRANSFER ENHANCEMENT TECHNOLOGIES OF THERMOELECTRIC POWER GENERATOR SYSTEM

ABSTRACT
The thermoelectric material is considered to a good choice to recycle the waste heat in the power and energy systems because the thermoelectric material is a solid-state energy converter which can directly convert thermal energy into electrical energy, especially suitable for high temperature power and energy systems due to the large temperature difference. However, the figure of merit of thermoelectric material is very low, and the thermoelectric power of generator system is even lower. This work reviews the recent progress on the thermoelectric power generator system from the view of heat transfer, including the theoretical analysis and numerical simulation on thermoelectric-hydraulic performance, conventional heat transfer enhancement technologies, radial and flow-directional segmented enhancement technologies for the thermoelectric power generator system. Review ends with the discussion of the future research directions of numerical simulation methods and heat transfer enhancement technologies used for the thermoelectric power generator in high temperature power and energy systems.
KEYWORDS
PAPER SUBMITTED: 2018-01-02
PAPER REVISED: 2018-04-04
PAPER ACCEPTED: 2018-04-06
PUBLISHED ONLINE: 2018-09-23
DOI REFERENCE: https://doi.org/10.2298/TSCI180102274M
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2018, VOLUME 22, ISSUE Issue 5, PAGES [1885 - 1903]
REFERENCES
  1. Mylavarapu, S. K., et al., Fabrication and Design Aspects of High-temperature Compact Diffusion Bonded Heat Exchangers, Nuclear Engineering and Design, 249 (2012), Aug., pp. 49-56
  2. Gaderer, M., et al., Biomass Fired Hot Air Gas Turbine with Fluidized Bed Combustion, Applied Thermal Engineering, 30 (2010), 13, pp. 1594-1600
  3. Utriainen, E., Sundén, B., Evaluation of the Cross Corrugated and Some Other Candidate Heat Transfer Surfaces for Microturbine Recuperators, Journal of Engineering for Gas Turbines & Power, 124 (2002), 3, pp. 550-560
  4. Li, Q., et al., Compact Heat Exchangers: A Review and Future Applications for a New Generation of High Temperature Solar Receivers, Renewable & Sustainable Energy Reviews, 15 (2011), 9, pp. 4855-4875
  5. Liang, X., et al., Comparison and Parameter Optimization of a Two-stage Thermoelectric Generator using High Temperature Exhaust of Internal Combustion Engine, Applied Energy, 130 (2014), Oct., pp. 190-199
  6. Ma, H. K., et al., Waste Heat Recovery Using a Thermoelectric Power Generation System in a Biomass Gasifier, Applied Thermal Engineering, 88 (2015), Sept., pp. 274-279
  7. Mueller, K. T., et al., Super-adiabatic Combustion in Al2O3 and SiC Coated Porous Media for Thermoelectric Power Conversion, Energy, 56 (2013), July, pp. 108-116
  8. Shah, R. K., Compact Heat Exchangers for Microturbines, Proceedings, 5th International Conference on Enhanced, Compact and Ultra-compact Heat Exchangers: Science, Engineering and Technology, Hoboken, New Jersey, USA, 2005, pp. 247-257
  9. Hsiao, Y. Y., et al., A Mathematic Model of Thermoelectric Module with Applications on Waste Heat Recovery from Automobile Engine, Energy, 35 (2010), 3, pp. 1447-1454
  10. Dibella, F., Gas Turbine Engine Exhaust Waste Heat Recovery Navy Shipboard Module Development, Technical Paper, Supercritical CO2 Power Cycle Symposium, Boulder, USA, 2011, pp. V001T04A003
  11. Sarnacki, W. P., et al., Increasing the Diesel & Brayton Cycle Efficiency with Thermoelectric Materials, Proceedings, ASME 2010 International Mechanical Engineering Congress & Exposition (IMECE2010), Vancouver, Canada, 2010, pp. 393-401
  12. Yazawa, K., et al., Optimization of Thermoelectric Topping Combined Steam Turbine Cycles for Energy Economy, Applied Energy, 109 (2013), Sept., pp. 1-9
  13. Yazawa, K., et al., High Exergetic Modified Brayton Cycle with Thermoelectric Energy Conversion, Applied Thermal Engineering, 114 (2017), Mar., pp. 1366-1371
  14. Alam, H., Ramakrishna, S., A Review on the Enhancement of Figure of Merit from Bulk to Nano-thermoelectric Materials, Nano Energy, 2 (2013), 2, pp. 190-212
  15. Martín-González, M., et al., Nanoengineering Thermoelectrics for 21st Century: Energy Harvesting and Other Trends in the Field, Renewable and Sustainable Energy Reviews, 24 (2013), Aug., pp. 288-305
  16. Zheng, X. F., et al., A Review of Thermoelectrics Research - Recent Developments and Potentials for Sustainable and Renewable Energy Applications, Renewable and Sustainable Energy Reviews, 32 (2014), Apr., pp. 486-503
  17. Elsheikh, M. H., et al., A Review on Thermoelectric Renewable Energy: Principle Parameters that Affect their Performance, Renewable and Sustainable Energy Reviews, 30 (2014), Feb., pp. 337-355
  18. He, W., et al., Recent Development and Application of Thermoelectric Generator and Cooler, Applied Energy, 143 (2015), Apr., pp. 1-25
  19. Twaha, S., et al., A Comprehensive Review of Thermoelectric Technology: Materials, Applications, Modelling and Performance Improvement, Renewable and Sustainable Energy Reviews, 65 (2016), Nov., pp. 698-726
  20. Siddique, A. R. M., et al., A Review of the State of the Science on Wearable Thermoelectric Power Generators (TEGs) and their Existing Challenges, Renewable and Sustainable Energy Reviews, 73 (2017), June, pp. 730-744
  21. Champier, D., Thermoelectric Generators: A Review of Applications, Energy Conversion and Management, 140 (2017), May, pp. 167-181
  22. Gao, X., Rational Design of High-efficiency Thermoelectric Materials with Low Band Gap Conductive Polymers, Computational Materials Science, 36 (2006), 1-2, pp. 49-53
  23. LeBlanc, S., Electrothermal Properties of Nanowire Materials for Energy Conversion Systems, Ph. D. thesis, Stanford University, Stanford, California, USA, 2012
  24. LeBlanc, S., Thermoelectric Generators: Linking Material Properties and Systems Engineering for Waste Heat Recovery Applications, Sustainable Materials and Technologies, 1-2 (2014), Dec., pp. 26-35
  25. Angrist, S. W., Direct Energy Conversion, Allyn and Bacon, Boston, Massachusetts, USA, 1982
  26. Rowe, D. M., Min, G., Design Theory of Thermoelectric Modules for Electrical Power Generation, IEEE Proceedings-Science Measurement and Technology, 143 (1996), 6, pp. 351-356
  27. Liang, G., et al., Analytical Model of Parallel Thermoelectric Generator, Applied Energy, 88 (2011), 12, pp. 5193-5199
  28. Yazawa, K., Shakouri, A., Optimization of Power and Efficiency of Thermoelectric Devices with Asymmetric Thermal Contacts, Journal of Applied Physics, 111 (2012), 2, pp. 024509
  29. McCarty, R., Thermoelectric Power Generator Design for Maximum Power: It's all About ZT, Journal of Electronic Materials, 42 (2013), 7, pp. 1504-1508
  30. Mackey, J., et al., Analytic Thermoelectric Couple Optimization Introducing Device Design Factor and Fin Factor, Applied Energy, 134 (2014), Dec., pp. 374-381
  31. Ramousse, J., et al., Analytical Optimal Design of Thermoelectric Heat Pumps, Applied Thermal Engineering, 82 (2015), May, pp. 48-56
  32. Kumar, S., et al., Optimization of Thermoelectric Components for Automobile Waste Heat Recovery Systems, Journal of Electronic Materials, 44 (2015), 10, pp. 3627-3636
  33. Kim, H. S., et al., Efficiency and Output Power of Thermoelectric Module by Taking into Account Corrected Joule and Thomson Heat, Journal of Applied Physics, 118 (2015), 11, pp. 115103
  34. Heghmanns, A., Beitelschmidt, M., Parameter Optimization of Thermoelectric Modules using a Genetic Algorithm, Applied Energy, 155 (2015), Oct., pp. 447-454
  35. Rezania, A., Rosendahl, L. A., A Comparison of Micro-structured Flat-plate and Cross-cut Heat Sinks for Thermoelectric Generation Application, Energy Conversion and Management, 101 (2015), Sept., pp. 730-737
  36. Jia, X., Gao, Y., Optimal Design of a Novel Thermoelectric Generator with Linear-shaped Structure under Different Operating Temperature Conditions, Applied Thermal Engineering, 78 (2015), Mar., pp. 533-542
  37. Wang, X. D., et al., A Three-dimensional Numerical Modeling of Thermoelectric Device with Consideration of Coupling of Temperature Field and Electric Potential Field, Energy, 47 (2012), 1, pp. 488-49
  38. Jang, J. Y., Tsai, Y. C., Optimization of Thermoelectric Generator Module Spacing and Spreader Thickness Used in a Waste Heat Recovery System, Applied Thermal Engineering, 51 (2013), 1-2, pp. 677-689
  39. Shi, Y., et al., A Real-sized Three-dimensional Numerical Model of Thermoelectric Generators at a Given Thermal Input and Matched Load Resistance, Energy Conversion and Management, 101 (2015), Sept., pp. 713-720
  40. Kossyvakis, D. N., et al., Computational and Experimental Analysis of a Commercially Available Seebeck Module, Renewable Energy, 74 (2015), Feb., pp. 1-10
  41. Silaen, A. K., et al., Numerical Model of Thermoelectric Topping Cycle of Coal-fired Power Plant, ASME Journal of Heat Transfer, 137 (2015), 9, pp. 091012
  42. Meng, J. H., et al., Characteristics Analysis and Parametric Study of a Thermoelectric Generator by Considering Variable Material Properties and Heat Losses, International Journal of Heat and Mass Transfer, 80 (2015), Jan., pp. 227-235
  43. Bjork, R., The Universal Influence of Contact Resistance on the Efficiency of a Thermoelectric Generator, Journal of Electronic Materials, 44 (2015), 8, pp. 2869-2876
  44. Hu, X. K., et al., Three-dimensional Finite-element Simulation for a Thermoelectric Generator Module, Journal of Electronic Materials, 44 (2015), 10, pp. 3637-3645
  45. Antonova, E. E., Looman, D. C., Finite Elements for Thermoelectric Device Analysis in ANSYS, Conference Paper, 24th International Conference on Thermoelectrics (ICT), Clemson, South Carolina, USA, 2005, pp. 200-203
  46. Zhou, S., et al., Multiscale Modeling of Thermoelectric Generators for the Optimized Conversion Performance, International Journal of Heat and Mass Transfer, 62 (2013), July, pp. 435-444
  47. Ma, T., et al., Simulation of Thermoelectric- Hydraulic Performance of a Thermoelectric Power Generator with Longitudinal Vortex Generators, Energy, 84 (2015), May, pp. 695-703
  48. Ma, T., et al., Numerical Study on Thermoelectric-hydraulic Performance of a Thermoelectric Power Generator with a Plate-fin Heat Exchanger with Longitudinal Vortex Generators, Applied Energy, 85 (2017), Part 2, pp. 1343-1354
  49. Chen, M., et al., A Three-dimensional Numerical Model of Thermoelectric Generators in Fluid Power Systems, International Journal of Heat and Mass Transfer, 54 (2011), 1-3, pp. 345-355
  50. Reddy, B. V. K., et al., Thermoelectric-hydraulic Performance of a Multistage Integrated Thermoelectric Power Generator, Energy Conversion and Management, 77 (2014), Jan., pp. 458-468
  51. Lu, X., et al., Influence of Thermal Hydraulic Boundary Conditions on Performance Prediction for Thermoelectric Modules, Proceedings, 9th International Symposium on Heat Transfer (ISHT-9), Beijing, China, 2016, pp. ISHT9-L0233
  52. Crane, D. T., Jackson, G. S., Optimization of Cross Fow Heat Exchangers for Thermoelectric Waste Heat Recovery, Energy Conversion and Management, 45 (2004), 9-10, pp. 1565-1582
  53. Niu, X., et al., Experimental Study on Low-temperature Waste Heat Thermoelectric Generator, Journal of Power Sources, 188 (2009), 2, pp. 621-626
  54. Lesage, F. J., et al., A Study on Heat Transfer Enhancement Using Flow Channel Inserts for Thermoelectric Power Generation, Energy Conversion and Management, 75 (2013), Nov., pp. 532-541
  55. Amaral, C., et al., Net Thermoelectric Generator Power Output Using Inner Channel Geometries with Alternating Flow Impeding Panels, Applied Thermal Engineering, 65 (2014), 1-2, pp. 94-101
  56. Reddy, B. V. K., et al., Three-dimensional Multiphysics Coupled Field Analysis of an Integrated Thermoelectric Device, Numerical Heat Transfer, Part A: Applications: An International Journal of Computation and Methodology, 62 (2012), 12, pp. 933-947
  57. Reddy, B. V. K., et al., Thermoelectric Performance of Novel Composite and Integrated Devices Applied to Waste Heat Recovery, Journal of Heat Transfer, 135 (2013), 3, pp. 031706
  58. Reddy, B. V. K., et al., Enhancement of Thermoelectric Device Performance Through Integrated Flow Channels, Frontiers in Heat and Mass Transfer, 4 (2013), 2, pp. 023001
  59. Wang, T. C., et al., Waste Heat Recovery Through Plate Heat Exchanger Based Thermoelectric Generator System, Applied Energy, 136 (2014), Dec., pp. 860-865
  60. Kempf, N., Zhang, Y., Design and Optimization of Automotive Thermoelectric Generators for Maximum Fuel Efficiency Improvement, Energy Conversion and Management, 121 (2016), Aug., pp. 224-231
  61. Pandit, J., et al., Heat Transfer Optimization for Thermoelectric Power Generation with Automobile Waste Heat Recovery Applications, Annual Review of Heat Transfer, 19 (2016), Chapter 6, pp. 241-277
  62. Rezania, A., Rosendahl, L. A., New Configurations of Micro Plate-fin Heat Sink to Reduce Coolant Pumping Power, Journal of Electronic Materials, 41 (2012), 6, pp. 1298-1304
  63. Wojtas, N., et al., Optimized Thermal Coupling of Micro Thermoelectric Generators for Improved Output Performance, Renewable Energy, 60 (2013), Dec., pp. 746-753
  64. Weng, C. C., Huang, M. J., A Simulation Study of Automotive Waste Heat Recovery Using a Thermoelectric Power Generator, International Journal of Thermal Sciences, 71 (2013), Sept., pp. 302-309
  65. Wang, Y., et al., Optimization of Fin Distribution to Improve the Temperature Uniformity of a Heat Exchanger in a Thermoelectric Generator, Journal of Electronic Materials, 44 (2015), 6, pp. 1724-1732
  66. Huang, G. Y., et al., Optimization of a Waste Heat Recovery System with Thermoelectric Generators by Three-dimensional Thermal Resistance Analysis, Energy Conversion and Management, 126 (2016), Oct., pp. 581-594
  67. Bell, L. E., Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric Systems, Science, 321 (2008), 5895, pp. 1457-1461
  68. Snyder, G. J., Ursell, T. S., Thermoelectric Efficiency and Compatibility, Physical Review Letters, 91 (2003), 14, pp. 148301
  69. Snyder, G. J., Application of the Compatibility Factor to the Design of Segmented and Cascaded Thermoelectric Generators, Applied Physics Letters, 84 (2004), 13, pp. 2436
  70. Ming, T., et al., Thermal Analysis on a Segmented Thermoelectric Generator, Energy, 80 (2015), Feb., pp. 388-399
  71. Norris, K. J., et al., Silicon Nanowire Networks for Multi-stage Thermoelectric Modules, Energy Conversion and Management, 96 (2015), May, pp. 100-104
  72. El-Genk, M. S., et al., Efficient Segmented Thermoelectric Unicouples for Space Power Applications, Energy Conversion and Management, 44 (2003), 11, pp. 1755-1772
  73. Favarel, C., et al., Numerical Optimization of the Occupancy Rate of Thermoelectric Generators to Produce the Highest Electrical Power, Energy, 68 (2014), Apr., pp. 104-116
  74. Favarel, C., et al., Experimental Analysis with Numerical Comparison for Different Thermoelectric Generators Configurations, Energy Conversion and Management, 107 (2016), Jan., pp. 114-122
  75. Lu, X., et al., Experimental Investigation on Thermoelectric Generator with Non-uniform Hot-side Heat Exchanger for Waste Heat Recovery, Energy Conversion and Management, 150 (2017), Oct., pp. 403-414

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence