THERMAL SCIENCE

International Scientific Journal

ANALYSIS OF A NOVEL HIGH PERFORMANCE INDUCTION AIR HEATER

ABSTRACT
This study represents an experimental and numerical investigation of the enhanced prototypes of the induction air heaters. For this purpose, flow field is enhanced in order to avoid turbulence. The air mass flow rate, outlet construction and the application of insulation of the outer surface of the heater were selected as the performance enhancing parameters. Depending on the exit construction, the new designed prototypes are named as K-2 and K-3. Experiments were performed under two groups for three various flow rates. In the first group, non-insulation situation is examined. In the second group tests, insulation is applied to the outside of windings and inlet-outlet flaps which constitute the boundary of the control volume for the prevention of heat losses. The increasing flow rate boosted the thermal efficiency by 9%. Each of insulation and enlarging exit cross section increased the thermal efficiency by 13%. It was observed that the thermal power transferred to air with the new prototypes increased about 246 W more than the previous designs. The thermal efficiencies of the K-2 and K-3 type heaters were calculated as 77.14% and 87.1%, respectively.
KEYWORDS
PAPER SUBMITTED: 2017-09-13
PAPER REVISED: 2017-11-05
PAPER ACCEPTED: 2017-11-10
PUBLISHED ONLINE: 2018-02-18
DOI REFERENCE: https://doi.org/10.2298/TSCI170913018U
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2018, VOLUME 22, ISSUE Supplement 3, PAGES [S843 - S853]
REFERENCES
  1. Doğan, H., Yılankırkan, N., Türkiye'nin Enerji Verimliliği Potansiyeli ve Projeksiyonu (Turkey's Energy Efficiency Potential and Projection: In Turkish), Gazi University Journal of Science and Technology Part C: Design and Technology, 3 (2015), 1, pp. 375-383
  2. Kumar, M., Das R.K., Experimental Analysis of Absorption Refrigeration System Driven by Waste Heat of Diesel Engine Exhaust, Thermal Science, Online First (2017), DOI:10.2298/TSCI160311003K
  3. Ay, I., Khanlari, A., Working Principles of the Solar Wall System and Its Viability in Turkey, Gazi University Journal of Science and Technology Part C: Design and Technology, 3 (2015), 3, pp. 525-533
  4. Harmati, N.L, Folić, J.R., Magyar, Z., Energy Performance Modelling and Heat Recovery Unit Efficiency Assessment of an Office Building, Thermal Science, 19 (2015), 3, pp. 865-880, DOI: 10.2298/TSCI140311102H
  5. ***, European Commission, www.europa.eu
  6. Sugantharaj Gnanadurai, S.S., Vijay Kumar, A., Kulundaivel K.M, Performances of Packed Bed Double Pass Solar Air Heater with Different Inclinations and Transverse Wire Mesh with Different Intervals, Thermal Science, 20 (2016), 1, pp. 175-183, DOI: 10.2298/TSCI131015085S
  7. Ali, M., Jokisalo, J., Siren, K., Lehtonen, M., Combining the Demand Response of Direct Electric Space Heating and Partial Thermal Storage Using LP Optimization, Electric Power Systems Research, 106 (2014), pp. 160-167, DOI: 10.1016/j.epsr.2013.08.017
  8. Aissa, W., El-Sallak, M., Elhakem, A., Performance of Solar Dryer Chamber Used for Convective Drying of Sponge-Cotton, Thermal Science, 18 (2014), Supp.2, pp. S451-S462, DOI: 10.2298/TSCI110710084A
  9. Jaeger, H., Roth, A., Toepfl, S., Holzhauser, T., Engel, K.H., Knorr, D., Vogel, R.F., Bandick, N., Kulling, S., Heinz, V., Steinberg, P., Opinion on the Use of Ohmic Heating for the Treatment of Foods, Trends in Food Science & Technology, 55 (2016), pp. 84-97, DOI: 10.1016/j.tifs.2016.07.007
  10. Solanki, S.C., Dubey, S., Tiwari, A., Indoor Simulation and Testing of Photovoltaic Thermal (PV/T) Air Collectors, Applied Energy, 86 (2009), 11, pp. 2421-2428, DOI: 10.1016/j.apenergy.2009.03.013
  11. Ali, H.M., Bhatti, A.I., Ali, M., An Experimental Investigation of Performance of a Double Pass Solar Air Heater with Thermal Storage Medium, Thermal Science, 19 (2015), 5, pp. 1699-1708, DOI: 10.2298/TSCI140824140A
  12. Turanjanin, V.M., Vućićević, B.S., Jonanović, M.P., Different Heating Systems for Single Family House Energy and Economic Analysis, Thermal Science, 20 (2016), Supp.1, pp. S309-S320, DOI: 10.2298/TSCI150616225T
  13. Kewou, S., Edoun, M., Tawetsing, O.M., Kuitche, A., Numerical Simulation of Convective Heat Transfer in Channel With Corrugated Walls, Thermal Science, Online First (2016), DOI: 10.2298/TSCI150615061K
  14. Rudnev, V., Loveless, D., Cook, R., Black, M., Handbook of Induction Heating, Marcel Dekker, New York, USA, 2003
  15. Unver, U., Efficiency Analysis of Induction Air Heater and Investigation of Distribution of Energy Losses, Tehnički Vjesnik/Technical Gazette, 23 (2016), 5, pp.1-9, DOI: 10.17559/TV-20151122224719
  16. Kuzmichev, A., Tsybulsky, L., Evaporators with Induction Heating and Their Applications, in: Advances in Induction and Microwave Heating of Mineral and Organic Materials (Ed. S. Grundas), InTech Press, New York, 2011, pp. 269-302
  17. Unver, H.M., Aydemir, M.T., Power and Frequency Control in a 60kW Induction Steel Heating Furnaces Through PLC, Proceedings, National Scientific Meetings, Ankara, Turkey, 2002, Vol. 1, pp. 36-39
  18. Beer, S., Günter, U., Combined Log Heating Furnace Inline Concept for Aluminium Extruders, Induction Technology, in: Heat Processing (Ed. B. Nacke), Vulkan-Verlag, Essen, 2012, pp.77-80
  19. Luo, J., Shih, A.J., Inverse Heat Transfer Solution of the Heat Flux Due to Induction Heating, Journal of Manufacturing Science and Engineering, 127 (2005), 3, pp.555-563
  20. Nian, S.C., Huang, M.S., Tsai, T.H., Enhancement of Induction Heating Efficiency on Injection Mold Surface Using a Novel Magnetic Shielding Method, International Communications in Heat and Mass Transfer, 50 (2014), pp.52-60
  21. Pleshivtseva, Y., Rapoport, E., Efimov, A., Nacke, B., Nikanorov, A., Special Method of Parametric Optimization of Induction Heating Systems, Proceedings, International Scientific Colloquium Modelling for Electromagnetic Processing, Hannover, Germany, 2008, Vol. 1, pp. 229-234
  22. Tavakoli, M.H., Karbaschi, H., Samavat, F., Computational Modelling of Induction Heating Process, Progress in Electromagnetics Research Letters, 11 (2009), pp.93-102
  23. Tavakoli, M.H., Karbaschi, H., Samavat, F., Influence of Workpiece Height on the Induction Heating Process, Mathematical and Computer Modelling, 54 (2011), pp.50-58
  24. Unver, U. Unver, H.M., Comparison of Natural Gas Fired and Induction Heating Furnaces, Part VI, Fuels and Combustion, in: Progress in Exergy, Energy, and the Environment (Eds. İ. Dinçer, A. Midilli, H. Kucuk), Springer International Publishing, 2014, pp.1009-1016
  25. Curran, J.S., Featherstone, A.M., Electric-Induction Fluid Heaters, Power Engineering Journal, 2 (1988), pp.157-160
  26. Manuel, G., Khan, M.T.E., Design of an Induction Heating Domestic Water Heater System, Master Thesis, Cape Peninsula Technology University, South Africa, 2009
  27. Kolesnikov, Y.B., Andreev, O.V., Heat-Transfer Intensification Promoted by Vertical Structures in Closed Channel under Magnetic Field, Experimental Thermal and Fluid Science, 15 (1997), 2, pp.82-90
  28. Altıntaş, A., Yıldız, M.N., Kızılkaya, İ., Design of a Microcontroller Based Liquid Heater Operating with the Principle of Induction Heating, Journal of the Institute of Science and Technology of Dumlupınar, 29 (2012), pp.45-52
  29. Acero, J., Alonso, R., Burdio, J.M., Barragan, L.A., Enhancement of Induction Heating Performance by Sandwiched Planar Windings, Electronics Letters, 42 (2006), 4, pp.241-242
  30. Acero, J., Carretero, C., Millán, I., Alonso, R., Lucía, O., Burdío, J.M., Experimental Setup for Inductive Efficiency Measurements of Domestic Induction Systems Based on Energy Balance, Proceedings, 36th Annual Conference on IEEE Industrial Electronics Society, Glendale, USA, 2010, Vol.1, pp.114-119
  31. Fenercioğlu, A., Kartal, A., Determination of Recycling Performance of Some Non-Ferrous Metals via Prototype Eddy Current Separator, Journal of the Faculty of Engineering and Architecture of Gazi University, 30 (2015), 2, pp.155-161
  32. Çetin, S., Bir Fazlı Bir İndüksiyon Isıtma Sistemi Analizi ve Dizaynı (Analysis and Design of an Single Phase Induction Heating System: In Turkish), Master Thesis, Pamukkale University, Turkey, 2005
  33. Lucía, O., Maussion, P., Dede, E.J., Burdío, J.M., Induction Heating Technology and Its Applications: Past Developments, Current Technology and Future Challenges, IEEE Transactions On Industrial Electronics, 61 (2014), 5, pp.2509-2520
  34. Makimura, Y., Tomita, H., Motegi, S., Superheated Steam Generator by Induction Heating, Proceedings, 13th European Conference on Power Electronics and Applications, Barcelona, Spain, 2009, Vol. 1, pp.1-4
  35. Bera, A., Babadagli, T., Status of Electromagnetic Heating for Enhanced Heavy Oil/Bitumen Recovery and Future Prospects: A Review, Applied Energy, 151 (2015), pp.206-226
  36. Burnett, H.J., Induction Gas Heater, Patent No. 3,534,197, United States Patent Office, Filed June 1, 1966, Ser. No. 554,955, 1970.
  37. Burnett, H.J., Electric Induction Gas Heater, Patent No. 3,671,715, United States Patent, Filed June 1, 1970, Appl. No. 42,324, 1972.
  38. Virgin, G.C., Electromagnetic Induction Air Heater, Patent No. 4,503,305, United States Patent, Filed Jan. 15, 1982, Appl. No. 339,408, 1985.
  39. Iguchi, A., Electromagnetic Induction Heater, Patent No. 5,237,144, United States Patent, Filed Jun. 17, 1991, Appl. No. 716,105, 1993.
  40. Unver, U., Yuksel, A., İndüksiyonlu Hava Isıtıcısında Geçici Rejim Durumunun Deneysel Olarak İncelenmesi (Experimental Investigation of Transient Condition of Induction Air Heating: In Turkish), Erzincan University Journal of Science and Technology, 9 (2016), 2, pp.112-125
  41. Gürel, A.E., Ceylan, İ., Aktaş, M., Meyve ve Sebzelerin Kurutma Parametrelerinin İncelenmesi (Examination of Drying Parameters of Fruits and Vegetables: In Turkish), Gazi University Journal of Science and Technology Part C: Design and Technology, 4 (2016), 4, pp.267-273
  42. Aktaş, M., Menlik, T., Boran, K., Aktekeli, B., Aktekeli, Z., Isı Pompalı Bir Kurutucuda Portakal Kabuğu Kurutulması (Orange Peel Drying in a Heat Pumped Dryer: In Turkish), Gazi University Journal of Science and Technology Part C: Design and Technology, 2 (2014), 2, pp.229-238
  43. Unver, U., Yuksel, A., Kelesoglu, A., Yuksel, F., Unver, H.M., Experimental Analysis of Construction Parameters on Thermal Efficiency of Induction Air Heaters, Proceedings, 9th International Exergy, Energy and Environment Symposium, Split, Croatia, 2017, Vol. 1, pp. 777-783
  44. Cengel, Y.A., Ghajar, A.J., Heat and Mass Transfer: Fundamentals and Applications (Sixth Edition), McGraw-Hill, New York, USA, 2011
  45. Yuksel, A., İndüksiyonlu Akışkan Isıtıcılarda Akış Parametrelerinin Isıtıcı Verimine Etkilerinin İncelenmesi (Investigation of the Effect of Flow Parameters on the Induction Fluid Heater Efficiency: In Turkish), Master Thesis, University of Yalova, Turkey, 2016
  46. Cheng, T.C., Tseng, C.J., Weng, L.C., Wu, S.K., Combined Natural Convection and Radiation with Temperature Dependent Properties, Thermal Science, Online First (2016), DOI: 10.2298/TSCI160225171C
  47. Hadjab, R., Kadja, M., CFD Simulation of Heat Transfer Performance of Exhaust Gas Recirculation Coolers for Heavy-Duty Diesel Engines, Thermal Science, Online First (2016), DOI:10.2298/TSCI160830317H

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence