THERMAL SCIENCE

International Scientific Journal

AN EXPERIMENTAL STUDY OF THE COMBUSITION AND EMISSION PERFORMANCES OF 2,5-DIMETHYLFURAN DIESEL BLENDS ON A DIESEL ENGINE

ABSTRACT
Experiments were carried out in a direct injection compression ignition engine fueled with diesel-dimethylfuran blends. The combustion and emission performances of diesel-dimethylfuran blends were investigated under various loads ranging from 0.13 to 1.13 MPa brake mean effective pressure, and a constant speed of 1800 rpm. Results indicate that diesel-dimethylfuran blends have different combustion performance and produce longer ignition delay and shorter combustion duration compared with pure diesel. Moreover, a slight increase of brake specific fuel consumption and brake thermal efficiency occurs when a Diesel engine operates with blended fuels, rather than diesel fuel. Diesel-dimethylfuran blends could lead to higher NOx emissions at medium and high engine loads. However, there is a significant reduction in soot emission when engines are fueled with diesel-dimethylfuran blends. Soot emissions under each operating conditions are similar and close to zero except for D40 at 0.13 MPa brake mean effective pressure. The total number and mean geometric diameter of emitted particles from diesel-dimethylfuran blends are lower than pure diesel. The tested fuels exhibit no significant difference in either CO or HC emissions at medium and high engine loads. Nevertheless, diesel fuel produces the lowest CO emission and higher HC emission at low loads of 0.13 to 0.38 MPa brake mean effective pressure.
KEYWORDS
PAPER SUBMITTED: 2016-05-26
PAPER REVISED: 2016-07-23
PAPER ACCEPTED: 2016-08-20
PUBLISHED ONLINE: 2016-09-05
DOI REFERENCE: https://doi.org/10.2298/TSCI160526226X
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2017, VOLUME 21, ISSUE Issue 1, PAGES [543 - 553]
REFERENCES
  1. Kegl, B., Kegl, M., Pehan, S., Green diesel engines: biodiesel usage in diesel engines, Springer, London, UK, 2013.
  2. Kegl, B., Hribernik, A., Experimental Analysis of Injection Characteristics Using Biodiesel Fuel, Energy & Fuels, 20 (2006), pp. 2239-2248
  3. Kegl, B., Optimal design of conventional in-line fuel injection equipment, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 209 (1995), pp. 135-141
  4. Knecht, W., Diesel engine development in view of reduced emission standards, Energy, 33 (2008), pp. 264- 271
  5. Kegl, B., Injection system optimization by considering fuel spray characteristics, Journal of Mechanical Design, 126 (2004), pp. 703-710
  6. Hawley, J.G., Wallace, F.J., Analysis of the effect of variations in fuel line pressure in high-speed direct injection engines, with high-pressure common rail fuel injection systems on heat release, cylinder pressure, performance and emissions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 219 (2005), pp. 413-422
  7. Fernando, S., Hall, H., Jha, S., NOx Reduction from Biodiesel Fuels, Energy & Fuels 20 (2006), pp. 376-382
  8. Erisman, J.W., Grennfelt, P., Sutton, M., The European perspective on nitrogen emission and deposition, Environmental International, 29 (2003), pp. 311-325
  9. Bluhm, K., Heger, S., Seiler, T.B., Hallare, A.V., Schäffer, A., Hollert, H., Toxicological and ecotoxicological potencies of biofuels used for the transport sector—a literature review, Energy & Environmental Science, 5 (2012), pp. 7381-7392
  10. Canakci, M., Combustion characteristics of a turbocharged DI compression ignition engine fueled with petroleum diesel fuels and biodiesel, Bioresource Technology, 98 (2007), pp. 1167-1175.
  11. Gaffney, J.S., Marley, N.A., The impacts of combustion emissions on air quality and climate - From coal to biofuels and beyond, Atmospheric Environment, 43 (2009), pp. 23-36
  12. Luque, R., Herrero-Davila, L., Campelo, J.M., Clark, J.H., Hidalgo, J.M., Luna, D., Marinas, J.M., Romero, A.A., Biofuels: a technological perspective, Energy & Environmental Science, 1 (2008), pp. 542-564
  13. Sharma, Y.C., Singh, B., Upadhyay, S.N., Advancements in development and characterization of biodiesel: A review, Fuel, 87 (2008), pp. 2355-2373
  14. Caspeta, L., Buijs, N.A.A., Nielsen, J., The role of biofuels in the future energy supply, Energy & Environmental Science, 6 (2013), pp. 1077-1082
  15. Demirbas, A., Progress and recent trends in biofuels, Progress in Energy and Combustion Science, 33 (2007), pp. 1-18
  16. Demirbas, A., Biodiesel production from vegetable oils via catalytic and non-catalytic supercritical methanol transesterification methods, Progress in Energy and Combustion Science, 31 (2005), pp. 466-487
  17. Nigam, P.S., Singh, A., Production of liquid biofuels from renewable resources, Progress in Energy and Combustion Science, 37 (2011), pp. 52-68
  18. Agarwal, A.K., Biofuels (alcohols and biodiesel) applications as fuels for internal combustion engines, Progress in Energy and Combustion Science, 33 (2007), pp. 233-271
  19. Park, J.Y., Kim, D.K., Lee, J.P., Park, S.C., Kim, Y.J., Lee, J.S., Blending effects of biodiesels on oxidation stability and low temperature flow properties, Bioresource Technology, 99 (2008), pp. 1196-1203
  20. Knothe, G., Improving biodiesel fuel properties by modifying fatty ester composition, Energy & Environmental Science, 2 (2009), 759-766
  21. Demirbas, A., Relationships derived from physical properties of vegetable oil and biodiesel fuels, Fuel, 87 (2008), pp. 1743-1748
  22. Kegl, B., Effects of biodiesel on emissions of a bus diesel engine, Bioresource Technology, 99 (2008), pp. 863-873
  23. Luque, R., Lovett, J.C., Datta, B., Clancy, J., Campelo, J.M., Romero, A.A., Biodiesel as feasible petrol fuel replacement: a multidisciplinary overview, Energy & Environmental Science, 3 (2010), pp. 1706-1721
  24. Zech, O., Bauduin, P., Palatzky, P., Touraud, D., Kunz, W., Biodiesel, a sustainable oil, in high temperature stable microemulsions containing a room temperature ionic liquid as polar phase, Energy & Environmental Science, 3 (2010), pp. 846-851
  25. Schleicher, T., Werkmeister, R., Russ, W., Meyer-Pittroff, R., Microbiological stability of biodiesel-dieselmixtures, Bioresource Technology, 100 (2009), pp. 724-730
  26. Hoekman, S.K., Broch, A., Robbins, C., Ceniceros, E., Natarajan, M., Review of biodiesel composition, properties, and specifications, Renewable and Sustainable Energy Reviews, 16 (2012), pp. 143-169
  27. Torres-Jimenez, E., Svoljšak-Jerman, M., Gregorc, A., Lisec, I., Dorado, M.P., Kegl, B., Physical and Chemical Properties of Ethanol−Biodiesel Blends for Diesel Engines, Energy & Fuels, 24 (2010), pp. 2002- 2009
  28. Atadashi, I.M., Aroua, M.K., Aziz, A.A., High quality biodiesel and its diesel engine application: A review, Renewable and Sustainable Energy Reviews, 14 (2010), pp. 1999-2008
  29. Knothe, G., Steidley, R., Kinematic viscosity of biodiesel fuel components and related compounds. Influence of compound structure and comparison to petrodiesel fuel components, Fuel, 84 (2005), pp. 1059-1065
  30. Kegl, B., Numerical analysis of injection characteristics using biodiesel fuel, Fuel, 85 (2006), pp. 2377-2387
  31. Pandey, R.K., Rehman, A., Sarviya, R.M., Impact of alternative fuel properties on fuel spray behavior and atomization, Renewable and Sustainable Energy Reviews, 16 (2012), pp. 1762-1778
  32. Torres-Jimenez, E., Svoljšak-Jerman, M., Gregorc, A., Lisec, I., Dorado, M.P., Kegl, B., Physical and chemical properties of ethanol-diesel fuel blends, Fuel, 90 (2011), pp. 795-802
  33. Kegl, B., Influence of biodiesel on engine combustion and emission characteristics, Applied Energy, 88 (2011), pp. 1803-1812
  34. Pehan, S., Svoljšak-Jerman, M., Kegl, M., Kegl, B., Biodiesel influence on tribology characteristics of a diesel engine, Fuel, 88 (2009), pp. 970-979
  35. Dunn, R.O., Effects of minor constituents on cold flow properties and performance of biodiesel, Progress in Energy and Combustion Science, 35 (2009), pp. 481-489
  36. Kegl, B., Biodiesel usage at low temperature, Fuel, 87 (2008), pp. 1306-1317
  37. Pandey, R.K., Rehman, A., Sarviya, R.M., Impact of alternative fuel properties on fuel spray behavior and atomization, Renewable and Sustainable Energy Reviews, 16 (2012), pp. 1762-1778
  38. Kegl, B., Numerical analysis of injection characteristics using biodiesel fuel, Fuel, 85 (2006), pp. 2377-2387
  39. Kegl, B., Experimental Investigation of Optimal Timing of the Diesel Engine Injection Pump Using Biodiesel Fuel, Energy & Fuels, 20 (2006), pp. 1460-1470
  40. Pogorevc, P., Kegl, B., Škerget, L., Diesel and Biodiesel Fuel Spray Simulations, Energy & Fuels, 22 (2008), pp. 1266-1274

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence