THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

Authors of this Paper

External Links

online first only

TEG heat performance study about improved fin structures

ABSTRACT
This paper involves an exhaust gas waste heat recovery system for vehicles, which uses thermoelectric modules and a heat exchanger to produce electric power. Based on summarizing the latest research of vehicle exhaust thermo-electric generator (TEG), it presents two new fin structures for the cylindrical heat exchanger in a TEG system. It mainly studies the thermal performance of two kinds of three-dimensional cylindrical heat exchanger models including spiral-fin heat exchanger with variable pitch in a computational fluid dynamics simulation environment. In terms of interface temperature and thermal uniformity and based on an evaluation method of the temperature uniformity for the heat exchangers, the thermal characteristics of heat exchangers with different pitch angle of the twisted fins, pitch of spiral fin, fin thickness and fin height are discussed. Two new fin structures are feasible to enhance the heat transfer performance of heat exchanger.
KEYWORDS
PAPER SUBMITTED: 2015-08-01
PAPER REVISED: 2016-03-20
PAPER ACCEPTED: 2016-03-23
PUBLISHED ONLINE: 2016-04-09
DOI REFERENCE: https://doi.org/10.2298/TSCI150801064W
REFERENCES
  1. Kim, S., et al., A Thermoelectric Generator Using Engine Coolant for Light-Duty Internal Com-bustion Engine-Powered Vehicles, Journal of Electronic Materials, 40(2011),5, pp. 812-816
  2. Liu, Y., et al., Experimental Research on Heat Transfer in a Coupled Heat Exchanger, Thermal Science,17(2013),5,pp.1437-1441
  3. Mandapati, M. J. K., et al., Thermodynamic Performance Evaluation of an Air-Air Heat Pipe Heat Exchanger, Thermal Science,18(2014),4,pp. 1343-1353
  4. Sippawit, N., et al., A Study of Sensing Heat Flow through Thermal Walls by Using Thermoelec-tric Module, Thermal Science,19(2015),5,pp. 1497-1505
  5. Rowe, D.M., et al., Weight Penalty Incurred in Thermoelectric Recovery of Automobile Exhaust Heat, Journal of Electronic Materials, 40 (2011),5, pp. 784-788
  6. Saqr, K.M., et al., Thermal Design of Automobile Exhaust Based Thermoelectric Generators: Ob-jectives and Challenges, International Journal of Automotive Technology, 9(2008),2, pp. 155-160
  7. Kumar, S., et al., Thermoelectric Generators for Automotive Waste Heat Recovery Systems Part II: Parametric Evaluation and Topological Studies, Journal of Electronic Materials, 42(2013),6, pp. 944-955
  8. Liu, C.W., et al., A 500 W Low-temperature Thermoelectric Generator: Design and Experimental Study, International Journal of Hydrogen Energy, 39(2014), 28, pp. 15497-15505
  9. He, W., et al., Recent development and application of thermoelectric generator and cooler, Ap-plied Energy, 143(2015), pp. 1-25
  10. Hatami, M., et al., Experimental and numerical analysis of the optimized finned-tube heat ex-changer for OM314 diesel exhaust exergy recovery, Energy Conversion and Management, 97(2015), pp. 26-41
  11. Deng,Y. D., et al., Thermal Optimization of the Heat Exchanger in an Automotive Exhaust-Based Thermoelectric Generator, Journal of Electronic Materials,42(2013),7, pp. 1634-1640
  12. Su, C.Q., et al., Effect of the Sequence of the Thermoelectric Generator and the Three-Way Cat-alytic Converter on Exhaust Gas Conversion Efficiency. Journal of Electronic Materials, 42 (2013),7, pp. 1877-1881
  13. Gamma Technologies Inc., GT-SUITE Engine Performance Tutorials, www.doc88. com/p-3137131683727.html
  14. Liu, X., et al., Experiments and Simulations on a Heat Exchanger of an Automotive Exhaust Thermoelectric Generation System Under Coupling Conditions, Journal of Electronic Materials, 43 (2014),6, pp. 2218-2223
  15. Zhou, M.F., et al., A heat transfer numerical model for thermoelectric generator with cylindrical shell and straight fins under steady-state conditions, Applied Thermal Engineering, 68(2014),1-2, pp. 80-91
  16. Tang, Z.B., et al., Fluid Analysis and Improved Structure of an ATEG Heat Exchanger Based on Computational Fluid Dynamics, Journal of Electronic Materials, 44 (2015),6, pp. 1554-1561