THERMAL SCIENCE

International Scientific Journal

HEAT GENERATION AND SIDE MILLING STABILITY OF TITANIUM ALLOY

ABSTRACT
In this paper, the thermal generation and milling stability of titanium alloy during machining are investigated mainly. A new definition of processing behavior is given based on the principles of minimization, entity expression and combination, and a model of side milling behavior is constructed. Through a series of side milling orthogonal experiments on Ti-6Al-4V titanium alloy, the cutting forces under different process parameters are obtained. Further, the cutting force coefficients of the model is calculated by the complete average algorithm and the peak average algorithm, and the milling stability of the system is analyzed by a stability lobe diagram. The results show that the different cutting parameters have important influences on the milling stability of titanium alloy.
KEYWORDS
PAPER SUBMITTED: 2020-05-23
PAPER REVISED: 2020-08-25
PAPER ACCEPTED: 2020-08-30
PUBLISHED ONLINE: 2020-11-27
DOI REFERENCE: https://doi.org/10.2298/TSCI2006033L
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2020, VOLUME 24, ISSUE Issue 6, PAGES [4033 - 4040]
REFERENCES
  1. Ezugwu, E. O., Key Improvements in the Machining of Difficult-to-Cut Aerospace Superalloys, International Journal of Machine Tools & Manufacture, 45 (2005), 12-13, pp. 1353-1367
  2. Ratchev, S. M., et al., Mathematical Modelling and Integration of Micro-Scale Residual Stresses into Axisymmetric FE Models of Ti6Al4V Alloy in Turning, Cirp Journal of Manufacturing ence & Technology, 4 (2011), 1, pp. 80-89
  3. Arrazola, P. J., et al., Machinability of Titanium Alloys (Ti6Al4V and Ti555.3), J. Mater. Process. Technol., 209 (2009), 5, pp. 2223-2230
  4. Quintana, G., Ciurana, J., Chatter in Machining Processes: A Review, International Journal of Machine Tools and Manufacture, 51 (2011), 5, pp. 363-376
  5. Telrandhe, S.V., et al., Effect of Microstructure and Cutting Speed on Machining Behavior of Ti6Al4V Alloy, Journal of Mechanical Science and Technology, 31 (2017), 5, pp. 2177-2184
  6. Rotella, G., et al., The Effects of Cooling Conditions on Surface Integrity in Machining of Ti6Al4V Alloy, International Journal of Advanced Manufacturing Technology, 71 (2014), 1-4, pp. 47-55
  7. Wu, H., Zhang, S., Effects of Cutting Conditions on the Milling Process of Titanium Alloy Ti6Al4V, International Journal of Advanced Manufacturing Technology, 77 (2015), 9-12, pp. 2235-2240
  8. Tobias, S. A., Fiswick, W., Theory of Generative Machine Tool Chatter, The Engineer, London, UK, 1958
  9. Altinta, Y., Budak, E., Analytical Prediction of Stability Lobes in Milling, Cirp Annals-Manufacturing Technology, 44 (1995), 1, pp. 357-362
  10. Abukhshim, N. A., et al., Heat Generation and Temperature Prediction in Metal Cutting: A Review and Implications for High Speed Machining, International Journal of Machine Tools & Manufacture, 46 (2006), 7-8, pp. 782-800
  11. Takeuchi, Y., et al., Improvement in the Working Accuracy of an NC Lathe by Compensating for Thermal Expansion, Precision Engineering, 4 (1982), 1, pp. 19-24

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence