THERMAL SCIENCE

International Scientific Journal

PERFORMANCE MEASUREMENTS ON AN EXPERIMENTAL OTTO/DIESEL ENGINE OPERATING WITH DIFFERENT FUELS

ABSTRACT
Multi-process working principle is one of the modern approaches to development of internal combustion engines. By combining the original features of the Otto and Diesel working processes, an improvement of the engine efficiency and ecological characteristics can be achieved. Examples for that are spark ignition engine with stratified charge as well as compression ignition engines with homogeneous charge. The experimental multi-process engine was developed as well as testing methodology, for the basic researches efficiency and ecological characteristics of the Otto/Diesel engine. This paper presents the results of the combination of Otto/ /Diesel working processes when the engine working with both conventional and bio-fuels. Results of initial tests of Otto/Diesel engine show a high potential to reduce particulate emissions. The investigation has shown certain disadvantages of the engine and the ways for theirs overcoming.
KEYWORDS
PAPER SUBMITTED: 2017-11-17
PAPER REVISED: 2017-12-16
PAPER ACCEPTED: 2017-12-16
PUBLISHED ONLINE: 2018-01-07
DOI REFERENCE: https://doi.org/10.2298/TSCI171117305D
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2018, VOLUME 22, ISSUE Issue 3, PAGES [1203 - 1213]
REFERENCES
  1. Husted, L. H., et al., Fuel Efficiency Improvements from Lean, Stratified Combustion with a Solenoid Injector, SAE Int. J. Engines 2(1):1359-1366, 2009, doi:10.4271/2009-01-1485.
  2. Dorić, J. Ž., Klinar. J. I., The realization and analysis of a new thermodynamic cycle for internal combustion engine, Thermal Science, 15 (2011), 4, pp. 961-974.
  3. Johanson, B., Homogeneous charge compression concept be the key to future automotive engines?, Int. J. Vehicle Design, 44 (2007), 1/2, pp 1-19.
  4. Olson, J., et al., Boosting for High Load HCCI, SAE Technical Paper 2004-01-0940, 2004, doi:10.4271/2004-01-0940.
  5. Pešić, R. B., et al., Benefits and challenges of variable compression ratio at diesel engines, Thermal Science, 14 (2010), 4, pp. 1063-1073.
  6. Davinić A., et al., Ignition system of multiprocessing Otto/Diesel engine, 10th anniversary international conference on accomplishments in electrical and mechanical engineering and information technology DEMI 2011, Proceedings, (Gordana Globočki-Lakić), Banja Luka, Bosnia And Herzegovina, 2011, pp. 673-680.
  7. Pešić, R. B., et al., New engine method for biodiesel cetane number testing, Thermal Science, 12 (2008), 1, pp. 125-138.
  8. American Petroleum Institute (API), Alcohols and Ethers, Publication № 4261, 3rd ed., Washington DC, June 2001, Table 2.
  9. ***, National Biodiesel Board, Soybean Methyl Ester Formula and Molecular Weight, biodiesel.org/docs/ffs-performace_usage/chemical-weight-formula.pdf?sfvrsn=4 , accessed on 11-20-2016.
  10. Jagadish, D., et al., The effect of supercharging on performance and emission characteristics of C.I. Engine with diesel-ethanol-ester blends, Thermal Science, 15 (2011), 4, pp. 1165-1174.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence