International Scientific Journal


Furnace sorbent injection for sulfur removal from flue gas presents a challenge, as the proper process optimization is of crucial importance in order to obtain both high sulfur removal rates and good sorbent utilization. In the simulations a two-phase gas-particle flow is considered. Pulverized coal and calcium-based sorbent particles motion is simulated inside of the boiler furnace. It is important to determine trajectories of particles in the furnace, in order to monitor the particles heat and concentration history. A two-way coupling of the phases is considered – influence of the gas phase on the particles, and vice versa. Particle-to-particle collisions are neglected. Mutual influence of gas and dispersed phase is modeled by corresponding terms in the transport equations for gas phase and the equations describing the particles turbulent dispersion. Gas phase is modeled in Eulerian field, while the particles are tracked in Lagrangian field. Turbulence is modeled by the standard k-ε model, with additional terms for turbulence modulation. Distribution, dispersion and residence time of sorbent particles in the furnace have a considerable influence on the desulfurization process. It was shown that, by proper organization of process, significant improvement considering emission reduction can be achieved. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. T-33018: Increase in energy and ecology efficiency of processes in pulverized coal-fired furnaces and optimization of utility steam boiler air preheater by using in-house developed software tools]
PAPER REVISED: 2016-05-09
PAPER ACCEPTED: 2016-05-19
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2017, VOLUME 21, ISSUE Supplement 3, PAGES [S759 - S769]
  1. Đukov ć, J., Bojanić, V., Aerozagađenje: pojam, stanje, izvori, kontrola i tehnološka rešenja (Air pollution: apprehension, state, sources, control, and technical solutions, in Serbian), D. P. Institut zašt te ekologije, Banja Luka, Bosnia and Herzegovina, 2000
  2. Belosevic, S., Beljanski, V., Tomanovic, I., Crnomarkovic, N., Tucakovic, D., Zivanovic, T., Numerical analysis of NOx control by combustion modifications in pulverized coal utility boiler, Energy & Fuels, 26 (2012), 1, pp. 425-442
  3. Makarytchev, S. V., Cen, K. F., Luo, Z. Y., Staged desulphurization by direct sorbent injection in pulverized-coal boilers, Energy, 19 (1994), 9, pp. 947-956
  4. Dou, B., Pan, W., Jin, Q., Wang, W., Li, Y., Prediction of SO2 removal efficiency for wet flue gas desulphurization, Energy Conversion and Management, 50 (2009), 10, pp. 2547-2553
  5. Srivastava, R. K., Jozewicz, W., Singer, C., SO2 scrubbing technologies: A review, Environmental progress, 20 (2001), 4, pp. 219-228
  6. ***, LIFAC North America, Project performance summary, Clean coal technology demonstration program, 2004
  7. Borgwardt, R., Calcium oxide sintering in atmospheres containing water and carbon dioxide, Industrial and Engineering Chemistry Research, 28 (1989), 4, pp. 493-500
  8. Alvfors, P., Svedberg, G., Modelling of the simultaneous calcination, sintering and sulphation of limestone and dolomite, Chemical engineering science, 47 (1992), 8, pp. 1903-1912
  9. Lindner, B., Simonsson, D., Comparison of structural models for gas-solid reactions in porous solids undergoing structural changes, Chemical Engineering Science, 36 (1981), 9, pp 1519-1527
  10. Kocafe, D., Karman, D., Steward, F. R., Interpretation of the sulfation rate of CaO, MgO, and ZnO with SO2 and SO3, AIChE Journal, 33 (1987), 11, pp. 1835-1843
  11. Miline, C. R., Silcox, G. D., Pershing, D. W., Kirchgessner, D. A., Calcination and sintering models for application to high-temperature, short-time sulfation of calcium-based sorbents, Industrial and Engineering Chemistry Research, 29 (1990), 2, pp. 139-149
  12. Silcox, G. D., Kramlich, J. C., Pershing, D. W., A mathematical model for the flash calcination of dispersed calcium carbonate and calcium hydroxide particles, Industrial and Engineering Chemistry Research, 28 (1989), 2, pp. 155-160
  13. Fan, L. S., Ghosh-Dastidar, A., Mahuli, S., Agnihotri, R., in: Dry scrubbing technologies for flue gas desulfurization (Ed. B. Toole-O'Neil), Kluwer Academic Publishers, Norwell, MA, USA, 1998, pp. 421-527
  14. Sijerčić, M., Matematič o modeli anje kompleksnih turbulentnih transportnih procesa - (Mathematical modeling of complex turbulent transport processes, in Serbian), Ju o oven ko društvo ter čara - In t tut za nuk earne nauke "V nča", Beo rad, 1998
  15. Belošević, ., Tomanović, I., Beljanski V., Tucaković, ., Živanović, T., Numerical prediction of processes for clean and efficient combustion of pulverized coal in power plants, Applied Thermal Engineering, 74 (2015), CCT2013, pp. 102-110
  16. Chen, X.-Q., Pereira J.C.F., Computational modeling of a dilute turbulent liquid-solid flow using a Eulerian-Lagrangian approach, International Journal of Numerical Methods for Heat & Fluid Flow, 10 (2000), 4, pp. 409-431
  17. Sijerčić M., Nemoda S., Oka S., The comparison of stochastic and diffusion models of dispersed phase in two-phase flows, Proceedings, International symposium on two-phase modeling and experimentation, Conference, Rome, Italy, 1995. pp. 375-383
  18. Belošević, S., Sijerčić, M, Tucaković , D., Crnomarković, N., A numerical study of a utility boiler tangentially-fired furnace under different operating conditions, Fuel, 87 (2008) 15-16, pp. 3331-3338
  19. Tomanović, I., Belošević ć, S., Milićević, A., Tucaković D., Modeling of calcium-based sorbent reactions with sulfur dioxide, Journal of the Serbian Chemical Society, 80 (2015), 4, pp. 549-562

© 2018 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence