THERMAL SCIENCE

International Scientific Journal

External Links

PERFORMANCE OF SOLAR DRYER CHAMBER USED FOR CONVECTIVE DRYING OF SPONGE-COTTON

ABSTRACT
Solar dryer chamber is designed and operated for five days of July 2008. Drying experiments are conducted for sponge-cotton; as a reference drying material in the ranges between 35.0 to 49.5°C of ambient air temperature, 35.2 to 69.8 °C drying air temperature, 30 to 1258 W/m2 solar radiation and 0.016 to 0.08 kg/s drying air flow rate. For each experiment, the mass flow rate of the air remained constant throughout the day. The variation of moisture ratio, drying rate, overall dryer efficiency, and temperature distribution along the dryer chamber for various drying air temperatures and air flow rates are discussed. The results indicated that drying air temperature is the main factor in controlling the drying process and that air mass flow rate has remarkable influence on overall drying performance. For the period of operation, the dryer attained an average temperature of 53.68°C with a standard deviation of 8.49°C within a 12-h period from 7:00 h to 19:00 h. The results of this study indicated that the present drying system has overall efficiency between 1.85 and 18.6 % during drying experiments. Empirical correlations of temperature lapse and moisture ratio in the dryer chamber are found to satisfactorily describe the drying curves of sponge-cotton material which may form the basis for the development of solar dryer design charts.
KEYWORDS
PAPER SUBMITTED: 2011-07-10
PAPER REVISED: 2012-05-22
PAPER ACCEPTED: 2012-05-25
DOI REFERENCE: https://doi.org/10.2298/TSCI110710084A
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2014, VOLUME 18, ISSUE Supplement 2, PAGES [S451 - S462]
REFERENCES
  1. Saim, R., Abboudi, S. and Benyoucef, B., "Computational analysis of transient turbulent flow and conjugate heat transfer characteristics in a solar collector panel with internal rectangular fins and baffles", Thermal Science, 14 (2010), 1, pp. 221-234.
  2. Dragicevic, S. M. and Lambic, M. R., "Numerical study of a modified trombe wall solar collector system", Thermal Science, 13 (2009), 1, pp. 195-204.
  3. Stefanovic, V. P. and Bojic, M. Lj., "Development and investigation of solar collectors for conversion of solar radiation into heat and/or electricity", Thermal Science, 10 (2006), 4, pp. 177-187.
  4. Ekechukwu, O. V. and Norton, B., "Review of solar-energy drying systems II: an overview of solar drying technology", Energy Conversion & Management, 40 (1999), pp. 615-655.
  5. Thanvi, K. P. and Pande, P.C., "Development of a low-cost solar agricultural dryer for arid regions of India", Energy in Agriculture, 6 (1987), pp. 35-40.
  6. Esper, A. and Mühlbauer, W., "Solar drying - An effective means of food preservation", Renewable Energy, I5 (1998), pp. 95-100.
  7. El-Sebaii, A. A., Aboul-Enein, S., Ramadan, M.R.I., and El-Gohary, H.G., "Experimental investigation of an indirect type natural convection solar dryer", Energy Conversion and Management, 43 (2002), pp. 2251-2266.
  8. Ramana Murthy, M. V., " A review of new technologies, models and experimental investigations of solar driers", Renewable and Sustainable Energy Reviews, 13 (2009), pp. 835-844.
  9. Tiris, C., Tiris, M., and Dincer, I., " Experiments on a new small-scale solar dryer", Applied Thermal Engineering, 16 (1996), 2, pp. 183-187.
  10. Shanmugam, V. and Natarajan, E.," Experimental investigation of forced convection and desiccant integrated solar dryer", Renewable Energy, 31 (2006), pp.1239-1251.
  11. Kadam, D.M. and Samuel, D.V.K., "Convective flat-plate solar heat collector for cauliflower drying", Biosystems Engineering, 93 (2006), 2, pp. 189-198.
  12. Aissa, W., El-Sallak, M. and Elhakem, A., "An experimental investigation of forced convection flat plate solar air heater with storage material", accepted for publication in Thermal Science Journal
  13. Khiari, B., Mihoubi, D. , Ben Mabrouk, S. and Sassi, M., "Experimental and numerical investigations on water behavior in a solar tunnel drier", Desalination, 168 (2004), pp. 117- 124.
  14. Arinze, E. A., Sokhansanj, S., Schoenau, G. J., and Ellis, V., "Design and experimental evaluation of a new commercial type mobile solar grain dryer provided with high efficiency fined-plate collector",WREC 1996, (1996), pp. 670-675.
  15. Arinze, E. A. , Schoenau, G. J. and Sokhansanj, S., "Design and experimental evaluation of a solar dryer for commercial high quality-hay production", Renewable Energy, 16 (1999), pp. 639-642.
  16. Vlachos, N. A., Karapantsios, T. D., Balouktsis, A. I. and Chassapis, D., "Design and testing of a new solar tray dryer", Drying Technology, 20 (2002), 5, pp. 1239-1267.
  17. Augustus Leon, M., Kumar, S., and Bhattacharya, S.C., " A comprehensive procedure for performance evaluation of solar food dry`ers ", Renewable and Sustainable Energy Reviews, 6 (2002), pp. 367-393.
  18. Li, Z., Zhong, H., Tang, R., Liu,T., Gao, W. and Zhang, Y., "Experimental investigation on solar drying of salted greengages", Renewable Energy, 31 (2006), pp. 837-847.
  19. Karim, M.A. and Hawlader, M. N. A., "Mathematical modelling and experimental investigation of tropical fruits drying", International Journal of Heat and Mass Transfer, 48 (2005), pp. 4914-4925.
  20. Lahsasni , S., Kouhila, M. , Mahrouz, M. and Jaouhari, J.T., "Drying kinetics of prickly pear fruit (Opuntia ficus indica)", Journal of Food Engineering, 61 (2004), pp. 173-179.
  21. Ekechukwu, O. V. and Norton, B., "Experimental studies of integral-type natural -circulation solar-energy tropical crop dryers", Energy Conuers. Mgmt., 38 (1997), 14, pp. 1483-1500.
  22. Figliola, R. S. and Beasley, D. E., "Theory and Design for Mechanical Measurements," John Wiley & Sons, New York, USA, 2nd edn., 1995.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence