THERMAL SCIENCE

International Scientific Journal

Authors of this Paper

External Links

HEAT TRANSFER EFFECTS IN A COUETTE FLOW THROUGH A COMPOSITE CHANNEL PARTLY FILLED BY A POROUS MEDIUM WITH A TRANSVERSE SINUSOIDAL INJECTION VELOCITY AND HEAT SOURCE

ABSTRACT
This study theoretically analyzes the heat transfer effects in a three dimensional Couette flow through a composite parallel porous plate channel partly filled by a porous medium. The flow is three dimensional in the channel because of the application of a transverse sinusoidal injection velocity of a particular form at the lower stationary plate. The governing equations are solved using a perturbation series expansion method. The effects of various flow parameters such as, Prandtl number (Pr), suction/injection parameter (λ), permeability of the porous medium (K), heat source parameter (S), and viscosity ratio parameter (Ф1), are investigated on temperature distribution in the composite channel and rate of heat transfer at the upper moving plate and at the fluid-porous medium interface, and discussed graphically.
KEYWORDS
PAPER SUBMITTED: 2010-07-16
PAPER REVISED: 2011-05-31
PAPER ACCEPTED: 2011-06-04
DOI REFERENCE: https://doi.org/10.2298/TSCI100716055C
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2011, VOLUME 15, ISSUE Supplement 2, PAGES [S175 - S186]
REFERENCES
  1. Durlofsky, L., Brady, J. F., Analysis of the Brinkman equation as a model for flow in porous media, Phys. Fluids, 30 (1987), pp. 3329-3341.
  2. Kladias, N., Prasad, V., Experimental verification of DBF flow model for natural convection in porous media: A case study for horizontal layers, AIAA Journal of Thermophysics and Heat Transfer, 5 (1991), pp. 560-576.
  3. Vafai, K., Kim, S. J., Forced convection in a channel filled with a porous medium: an exactsolution, ASME J. Heat Transfer, 111 (1989), pp. 1103-1106.
  4. Nakayama, A., Koyama, H., Kuwahara, F., An analysis on forced convection in a channel filled with a Brinkman-Darcy porous medium: Exact and approximate solutions, und , 23 (1988), pp. 291-295.
  5. Nield, D. A., Junqueira, S. L. M., Lage, J. L., Forced convection in a fluid saturated porous medium channel with isothermal or isoflux boundaries, J. Fluid Mech., 322 (1996), pp. 201-214.
  6. Al-Hadhrami, A. K., Elliott, L., Ingham, D. B., Combined free and forced convection in vertical channels of porous media, Transport in Porous Media, 49 (2002), pp. 265-289.
  7. Kim, S., Russell, W. B., Modeling of porous media by renormalization of the Stokes equation, J. Fluid Mech., 154 (1985), 269-286.
  8. Nield, D. A., Kuznetsov, A. V., Xiong, M., Effects of viscous dissipation and flow work on forced convection in a channel filled by a saturated porous medium, Transport in Porous Media, 56 (2004), pp. 351-367.
  9. Hooman, K., Gurgenci, H., Merrikh, A. A., Heat transfer and entropy generation optimization of forced convection in a porous-saturated duct of rectangular cross-section, Int. J. Heat and Mass Transfer, 50 (2007), pp. 2051-2059.
  10. Chauhan, D. S., Kumar, V., Effects of slip condition on forced convection and entropy generation in a circular channel occupied by a highly porous medium: Darcy extended Brinkman-Forchheimer model, Turkish J. Eng. Env. Sci., 33 (2009), pp. 91-104.
  11. Bhargava, S. K., Sacheti, N. C., Heat transfer in generalized Couette flow of two immiscible Newtonian fluids through a porous channel: use of Brinkman model, Indian J. Tech., 27 (1989), pp. 211-214.
  12. Daskalakis, J., Couette flow through a porous medium of a high Prandtl number fluid with temperature dependent viscosity, Int. J. of Energy Research, 14 (1990), pp. 21-26.
  13. Nakayama, A., Non-Darcy Couette flow in a porous medium filled with an inelastic non-Newtonian fluid, ASME Journal of Fluids Engineering, 114 (1992), pp. 642-647.
  14. Chauhan, D. S., Shekhawat, K. S., Heat transfer in Couette flow of a compressible Newtonian fluid in the presence of a naturally permeable boundary, J. Phys. D: Appl. Phys., 26 (1993), pp. 933-936.
  15. Chauhan, D. S., Vyas, P., Heat transfer in hydromagnetic Couette flow of compressible Newtonian fluid, ASCE Journal of Engineering Mechanics, 121 (1995), 1, pp. 57-61.
  16. Chauhan, D. S., Soni, V., Parallel flow convection effects on Couette flow past a highly porous bed, Modeling, Measurement & Control, B, AMSE Press, 56 (1994), 1, pp. 7-21.
  17. Kuznetsov, A. V., Analytical investigation of Couette flow in a composite channel partially filled with a porous medium and partially with a clear fluid, Int. J. Heat Mass Transfer, 41 (1998), 16, pp. 2556-2560.
  18. Kuznetsov, A. V., Analytical investigation of heat transfer in Couette flow through a porous medium utilizing the Brinkman-Forchheimer-extended Darcy model, Acta Mechanica, 129 (1998), pp. 13-24.
  19. Kuznetsov, A. V., Fluid flow and heat transfer analysis of Couette flow in a composite duct, Acta Mech., 140 (2000), pp. 163-170.
  20. Singh, K. D., Three dimensional Couette flow with transpiration cooling, ZAMP, 50 (1999), pp. 661-668.
  21. Govindarajan, A., Ramamurthy, V., Sundarammal, K., 3D Couette flow of dusty fluid with transpiration cooling, Journal of Zhejiang University SCIENCE A, 8 (2007), 2, pp. 313-322.
  22. Das, S. S., Mohanty, M., Panda, J. P., Sahoo, S. K., Hydromagnetic three dimensional Couette flow and heat transfer, J. of Naval Architecture and Marine Engng., 5 (2008), pp. 1-10.
  23. Chauhan, D. S., Kumar, V., Three-dimensional Couette flow in a composite channel partially filled with a porous medium, Appl. Math. Sci., 4 (2010), 54, pp. 2683-2695.

© 2024 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence